| ################################################################################# |
| # Copyright (c) 2006, 2012 Red Hat, Inc. |
| # |
| # This program and the accompanying materials |
| # are made available under the terms of the Eclipse Public License 2.0 |
| # which accompanies this distribution, and is available at |
| # https://www.eclipse.org/legal/epl-2.0/ |
| # |
| # SPDX-License-Identifier: EPL-2.0 |
| # |
| # Contributors: |
| # Red Hat Incorporated - initial API and implementation |
| # IBM Corporation |
| ################################################################################# |
| ConvertWizard.description=Convert to C/C++ Autotools Project |
| NewCProject.description=GNU C Autotools Project |
| NewCProjectV2.description=GNU C Autotools Project V2 |
| NewCCProject.description=GNU C++ Autotools Project |
| NewCWizard.name=GNU C Autotools Project |
| NewCWizardV2.name=GNU C Autotools Project V2 |
| NewCCWizard.name=GNU C++ Autotools Project |
| |
| Autotools.wizard.name=GNU Autotools Build Wizard |
| |
| Autoconf.editor.name=Autoconf Editor |
| |
| BuildProperty.value.name.default=Default; |
| BuildProperty.value.name.debug=Debug |
| BuildProperty.type.name.autotools=GNU Autotools |
| |
| PreferenceAutotools.name=Autotools |
| PreferenceAutomakeEditor.name=Automake Editor |
| PreferenceAutoconfEditor.name=Autoconf Editor |
| |
| PropertyAutotools.name=Autotools |
| PropertyAutotools.general.name=General |
| PropertyAutotools.configure.name=Configure Settings |
| PropertyTabEditor.name=Editors |
| AutotoolsBuildPropertyTab.name=Behaviour |
| AutotoolsEditorsPropertyTab.name=Editors |
| AutotoolsToolsPropertyTab.name=Tools Settings |
| AutotoolsConfigurePropertyTab.name=Configure Settings |
| |
| PropertyTabEditor.tooltip=Set options for Autotools-specific editors |
| PropertyTabBuild.tooltip=Set additional Autotools build options |
| |
| Makefile.builder.name=Autotools Makefile Generator |
| Autotools.projecttype.name=GNU Autotools |
| AutotoolsNature.name=Autotools Project Nature |
| AutotoolsNewNature.name=Autotools Project Nature V2 |
| Configuration.build.name=Build (GNU) |
| Configuration.debug.name=Debug (GNU) |
| Autotools.targetplatform.name=GNU Autotools Target Platform |
| Autotools.gnu.toolchain.name=GNU Autotools Toolchain |
| Configure.outputType=Configure Output (config.status) |
| Autogen.outputType=Autogen Output (configure) |
| |
| CommandCategorySource.name=Source |
| CommandCategorySource.description=Source commands |
| CommandCategoryTools.name=Tools |
| CommandCategoryTools.description=Autotool tools |
| ShowTooltip.name=Show Tooltip Description |
| ShowTooltip.description=Shows the tooltip description for the element at the cursor |
| |
| # Scope and Key Commands |
| ACeditor.scope.name=Autoconf Editor |
| ACeditor.scope.description=Editor for Autoconf Configuration Source Files |
| |
| Tool.configure=configure |
| |
| OptionCategory.configure.general=General |
| Option.configure.name=Name |
| Option.configure.builddir=Build directory |
| Option.configure.builddir.tip=Subdirectory off of project where build will occur |
| Option.configure.configdir=Configure tool directory |
| Option.configure.configdir.tip=Subdirectory off of project containing configure scripts |
| Option.configure.cache_file=Name of configuration cache file (--cache-file) |
| Option.configure.cache_file.tip=Specify the name of the configuration cache file [config.cache] |
| Option.configure.no_create=Turn off file creation <not advised> (--no-create) |
| Option.configure.no_create.tip=This tells configuration not to generate the output files as part of configuration |
| Option.configure.quiet=Turn off checking messages (--quiet) |
| Option.configure.quiet.tip=This turns off "checking ..." style messages from the configuration console output |
| Option.configure.help=Display help contents of top-level configuration (--help) |
| Option.configure.help.tip=Ask configuration file to display its help documentation |
| Option.configure.version=Display version of autotools used to create configuration (--version) |
| Option.configure.version.tip=This outputs the version of the Autotools used to create the configuration files |
| |
| OptionCategory.configure.platform=Platform Specifiers |
| Option.configure.host=Host platform (--host) |
| Option.configure.host.tip=Platform that project will run on |
| Option.configure.target=Target platform (--target) |
| Option.configure.target.tip=Platform that project will target output for |
| Option.configure.build=Build platform (--build) |
| Option.configure.build.tip=Platform where project is being built |
| |
| OptionCategory.configure.directories=Directory specifiers |
| Option.configure.prefix=Arch-independent install directory (--prefix) |
| Option.configure.prefix.tip=Place where architecture-independent files are installed [/usr/local] |
| Option.configure.exec_prefix=Arch-dependent install directory (--exec-prefix) |
| Option.configure.exec_prefix.tip=Place where architecture-dependent files are installed [PREFIX] |
| Option.configure.libdir=Object code library directory (--libdir) |
| Option.configure.libdir.tip=Place where object code libraries are installed [EPREFIX/lib] |
| Option.configure.bindir=User executable directory (--bindir) |
| Option.configure.bindir.tip=Place where binary executables are installed [EPREFIX/bin] |
| Option.configure.sbindir=System admin executable directory (--sbindir) |
| Option.configure.sbindir.tip=Place where system admin executables are installed [EPREFIX/sbin] |
| Option.configure.includedir=C Header file directory (--includdir) |
| Option.configure.includedir.tip=Place where header files will be installed [PREFIX/include] |
| Option.configure.datadir=Read-only architecture-independent data (--datadir) |
| Option.configure.datadir.tip=Place where read-only architecture-independent data is installed [PREFIX/share] |
| Option.configure.sysconfdir=Read-only single-machine data directory (--syconfdir) |
| Option.configure.sysconfdir.tip=Place where read-only single-machine data is stored [PREFIX/etc] |
| Option.configure.infodir=Info file documentation directory (--infodir) |
| Option.configure.infodir.tip=Place where info files are installed [PREFIX/info] |
| Option.configure.mandir=Man file documentation directory (--mandir) |
| Option.configure.mandir.tip=Place where man file documentation is installed [PREFIX/man] |
| Option.configure.srcdir=Sources directory (--srcdir) |
| Option.configure.srcdir.tip=Place where configure can find sources [configure directory or ..] |
| Option.configure.localstatedir=Modifiable single-machine data directory (--localstatedir) |
| Option.configure.localstatedir.tip=Place where modifiable single-machine data is installed [PREFIX/var] |
| Option.configure.sharedstatedir=Modifiable architecture-independent data directory (--sharedstatedir) |
| Option.configure.sharedstatedir.tip=Place where modifiable architecture-independent data is installed [PREFIX/com] |
| Option.configure.libexecdir=Program executable directory (--libexecdir) |
| Option.configure.libexecdir.tip=Place where program executables will be installed [EPREFIX/libexec] |
| Option.configure.oldincludedir=Non-gcc C header file directory (--oldincludedir) |
| Option.configure.oldincludedir.tip=Place where non-gcc C header files are installed [/usr/include] |
| |
| OptionCategory.configure.filenames=File-name transformations |
| Option.configure.program_prefix=Installed program prefix (--program-prefix) |
| Option.configure.program_prefix.tip=Prepend PREFIX to the beginning of installed program names |
| Option.configure.program_suffix=Installed program suffix (--program-suffix) |
| Option.configure.program_suffix.tip=Append SUFFIX to the end of installed program names |
| Option.configure.program_transform_name=Installed program name transform (--program-transform-name) |
| Option.configure.program_transform_name.tip=A sed string used to transform installed program names |
| |
| OptionCategory.configure.features=Features and packages |
| Option.configure.enable_maintainer_mode=Enable maintainer mode (--enable-maintainer-mode) |
| Option.configure.enable_maintainer_mode.tip=Specify this to have Makefiles generated with checks for Autotool configuration file changes |
| Option.configure.user=User-specified configuration options |
| Option.configure.user.tip=Specify one or more configuration options (e.g. --enable-FEATURE, --disable-FEATURE, or --with-PACKAGE) |
| |
| Tool.autogen = autogen.sh |
| |
| OptionCategory.autogen.general=Options |
| Option.autogen.user=Command line options |
| Option.autogen.user.tip=Specify options to pass to the top-level autogen.sh script |
| |
| RedHatVendor.name = Red Hat |
| Bundle-Name.0 = Autotools Plug-in |
| provider=Eclipse CDT |
| ConvertWizard.name = Convert to a C/C++ Autotools Project |
| InvokeAutotools.label = Invoke Autotools |
| InvokeAutotools.mnemonic = I |
| InvokeAutoconf.label = Invoke Autoconf |
| InvokeAutoconf.mnemonic = c |
| InvokeAutoconf.description = Run autoconf in the selected directory |
| InvokeAutoheader.label = Invoke Autoheader |
| InvokeAutoheader.mnemonic = h |
| InvokeAutoheader.description = Run autoheader from the selected directory |
| InvokeAutomake.label = Invoke Automake |
| InvokeAutomake.mnemonic = m |
| InvokeAutomake.description = Run automake from the selected directory |
| InvokeAutoreconf.label = Invoke Autoreconf |
| InvokeAutoreconf.mnemonic = r |
| InvokeAutoreconf.description = Run autoreconf from the selected directory |
| InvokeAclocal.label = Invoke Aclocal |
| InvokeAclocal.mnemonic = l |
| InvokeAclocal.description = Run aclocal from the selected directory |
| InvokeLibtoolize.label = Invoke Libtoolize |
| InvokeLibtoolize.mnemonic = t |
| InvokeLibtoolize.description = Run libtoolize in the selected directory |
| Reconfigure.label = Reconfigure Project |
| Reconfigure.mnemonic = f |
| Reconfigure.description = Run configuration scripts for project |
| DynamicBuild.label = Dynamic Build Info |
| GetIncludePath.label = Get Include Path |
| GetDefinedSymbols.label = Get Defined Symbols |
| IncludesOption.name = includes |
| SymbolsOption.name = symbols |
| AutomakeEditor.name = AutomakeEditor |
| Automake.name = automake |
| ConfigureScript.name=Configure Script |
| AutogenScript.name=Autogen Script |
| LibtoolGCCBuildOutputParser.name = CDT Libtool GCC Build Output Parser |
| |
| AutotoolsProblemMarker.name=Configure Problem |
| AutotoolsErrorParser.name=Autotools Error Parser |
| |
| AutoconfErrorParser.name=Autoconf Error Parser |