diff --git a/src/main/asciidoc/howto/howtoBuild.adoc b/src/main/asciidoc/howto/howtoBuild.adoc
index 688050c..98893a2 100644
--- a/src/main/asciidoc/howto/howtoBuild.adoc
+++ b/src/main/asciidoc/howto/howtoBuild.adoc
@@ -1,10 +1,17 @@
-= openKonsequenz - How to build the module "grid-failure-information@openK"
-:Date: 2017-11-17
+= openKonsequenz - How to build the module "gridFailureInformation@openK"
+
+:Date: 2020-03-24
 :Revision: 1
+
 :icons:
 :source-highlighter: highlightjs
 :highlightjs-theme: solarized_dark
 
+:imagesdir: ../img
+:iconsdir: ../img/icons
+
+:lang: en
+:encoding: utf-8
 <<<
 
 IMPORTANT: Please be sure that you have first *Portal (Auth n Auth)* and *ContactBaseData* installed and configured!
@@ -53,5 +60,72 @@
 
 TIP: Next Step -> Read the *grid-failure-information_howtoRun* file!
 
+== How to build the SIT-Web-FE (Map- and Table-Component)
+=== Prerequirements
 
+* Open a command line and make sure that nest-cli is installed:
++
+[source,command]
+----
+    $ nest -version
+----
+{blank} 
+=> This should show the version number. 
 
+* If you miss the version number or get an error then install the nest-cli with the following command:
++
+[source,command]
+----
+    $ npm install -g @nestjs/cli
+----
+{blank} 
+
+=== Build and run the SIT-Web-Cache-Service
+
+* Open a command line and navigate to the folder of the service project
+(_grid-failure-information-web-cache_).
+
+* To build the service run the commands:
++
+[source,command]
+----
+   $  npm install
+   $  nest build
+----
+{blank} 
+=> A folder named '_dist_' should be created in the project folder containing *.js and *.ts files.
+
+* Start the service with the following command for testing:
++
+[source,command]
+----
+   $  npm run start
+----
+{blank} 
+=> After the nest service is started you can test the service within your browser by calling the following address: http://localhost:3000/public-sit. (You should replace _localhost_ with your own network address.) 
+
+=== Build the SIT-Web-FE
+
+* Open a command line and navigate to the root folder of the project. +
+=> The project.json file should be in the same folder.
+
+* Install the required dependencies with the following command:
++
+[source,command]
+----
+    $ npm install
+----
+{blank}
+
+* Build the map and table component:
++
+[source,command]
+----
+    $ npm install
+    $ npm run build-map-app-full
+    $ npm run build-table-app
+----
+{blank}
+=> A folder named '_dist_' should be created in the project root folder.
+
+TIP: Next Step -> Read the *howtoRun* file!
diff --git a/src/main/asciidoc/howto/howtoRun.adoc b/src/main/asciidoc/howto/howtoRun.adoc
index 6204fd4..590c311 100644
--- a/src/main/asciidoc/howto/howtoRun.adoc
+++ b/src/main/asciidoc/howto/howtoRun.adoc
@@ -1,10 +1,18 @@
 = openKonsequenz - How to run the module "gridFailureInformation@openK"
-:Date: 2017-11-17
+
+:Date: 2020-03-24
 :Revision: 1
+
 :icons:
 :source-highlighter: highlightjs
 :highlightjs-theme: solarized_dark
 
+:imagesdir: ../img
+:iconsdir: ../img/icons
+
+:lang: en
+:encoding: utf-8
+
 <<<
 
 IMPORTANT: Please be sure that you have first *Portal (Auth n Auth)* and *ContactBaseData* installed and configured!
@@ -87,5 +95,119 @@
 IMPORTANT: The reason you maybe don´t see the application running properly, is that you have not even logged in.
 To do so, run first the Portal project, where you can log in and then open the elogbook.
 
+== How to run the SIT-Web-Cache-Service
+=== Prerequirements
+* SIT-Web-Cache-Service is built properly. Otherwise following the instructions in the *howtoBuild* file!
+* Your secured DMZ (demilitarized zone) can host the SIT-Web-Cache-Service.
+* SIT-Web-Cache-Service needs *nodejs* and *nestjs*. Both have to be installed as described in the *howtoBuild* file.
+* The SIT-Web-Cache-Service should be reachable from the SIT_BE. 
 
+=== Run the service
+* Copy all files from the build output to the provided folder in the DMZ.
+* Open a command line and navigate to this folder. 
+* Start the service with the following commands:
++
+[source,command]
+----
+    $ node dist/main
+----
+{blank}
+
+== How to run SIT-Web-FE (map- and table-component)
+=== Prerequirements
+* Both Parts of SIT-Web-FE are built properly. Otherwise following the instructions in the *howtoBuild* file!
+* SIT-Web-Cache-Service runs properly. 
+* Your secured DMZ (demilitarized zone) can host the SIT-Web-FE.
+* SIT-Web-FE needs *nodejs* which have to be installed as descrbed in the *howtoBuild* file.
+* The SIT-Web-FE should be able to consume the SIT-Web-Cache-Service and both parts should be in the same DMZ.
+* If you do not have a web server in your environment (e.g. in a development environment) you can use *http-server*. To install this free and lightweight http server run the following command in a command line:
++ 
+[source, command]
+----
+    $ npm install -g http-server
+----
+
+IMPORTANT: The description below use *http-server* as an http server. +
+In many cases you will have your own web server - like *tomcat*, *apache*, *IIS* etc. - 
+and you have to configure proxy settings and the http communication between all SIT components within this web server.
+
+=== Run the map component
+* Copy all files from the build output to the provided folder in the DMZ.
+* Open a command line and navigate to this folder. 
+* Start the service with the following commands:
++
+[source,command]
+----
+    $ http-server dist/grid-failure-information-map-app/ -P http://localhost:3003 -p 3001
+----
+{blank}
++
+CAUTION: Take care about this parameters: +
+*-P*: The proxy for requesting the SIT-Web-Cache-Service. +
+*-p*: TCP-Port of SIT-Web-FE
+
+* Open a browser and open the address to your SIT-Web-FE with the correct TCP-Port:
++
+[source,http]
+----
+    http://{SIT-Web-FE Adress}:3001
+----
+{blank}
++
+=> A map with all grid failure appears in your browser.
+
+=== Run the table component
+* Copy all files from the build output to the provided folder in the DMZ.
+* Open a command line and navigate to this folder. 
+* Start the service with the following commands:
++
+[source,command]
+----
+    $ http-server dist/grid-failure-information-table-app/ -P http://localhost:3003 -p 3002
+----
+{blank}
++
+CAUTION: Take care about this parameters: +
+*-P*: The proxy for requesting the SIT-Web-Cache-Service. +
+*-p*: TCP-Port of SIT-Web-FE
+
+* Open a browser and open the address to your SIT-Web-FE with the correct TCP-Port:
++
+[source,http]
+----
+    http://{SIT-Web-FE Adress}:3002
+----
+{blank}
++
+=> A table with all grid failure appears in your browser.
+
+== How to use SIT-Web-FE
+
+To show all grid failure on a map or in a table inside your own web application you can run SIT-Web-FE beside your application.
+
+=== Prerequirements
+* To have an secure access to the failure information you have to had installed the cache service as well.
+
+=== Integrate the map component
+
+* Copy all *.js* and *.css* files from the build output (_/dist/openk-grid-failure-information-map-init_) to your own web application folder. (Green boxes in the image below.)
+* Reference all this files in your web application like the examples in the yellow boxes in the image below.
+* Use the map app like an html element with the following tag: +
+*<openk-grid-failure-information-map-init></openk-grid-failure-information-map-init>* +
+(red box in the image)
+
+.Neccessary files for map integration
+[options="header"]
+image::SIT_mapAppUsage.png[]
+
+CAUTION: All builded files have an randomized alphanumerical postfix as you see in the image. This postfixes differs from build to build and have to be updated if a update occured.
+
+=== Integrate the table component
+
+The process to use the table component is similar to the description for the map component above. +
+Note the following adjustments:
+
+* You find the files to copy in the following folder: _/dist/openk-grid-failure-information-table-init_
+* Use this html tag: + 
+*<openk-grid-failure-information-table></openk-grid-failure-information-table>*
 
diff --git a/src/main/asciidoc/img/SIT_mapAppUsage.png b/src/main/asciidoc/img/SIT_mapAppUsage.png
new file mode 100644
index 0000000..5950cf6
--- /dev/null
+++ b/src/main/asciidoc/img/SIT_mapAppUsage.png
Binary files differ