| /******************************************************************** |
| * |
| * Standard register and bit definitions for the Texas Instruments |
| * MSP430 microcontroller. |
| * |
| * This file supports assembler and C development for |
| * MSP430x14x devices. |
| * |
| * Texas Instruments, Version 2.4 |
| * |
| * Rev. 1.2, Additional Timer B bit definitions. |
| * Renamed XTOFF to XT2OFF. |
| * Rev. 1.3, Removed leading 0 to aviod interpretation as octal |
| * values under C |
| * Included <In430.h> rather than "In430.h" |
| * Rev. 1.4, Corrected LPMx_EXIT to reference new intrinsic _bic_SR_register_on_exit |
| * Changed TAIV and TBIV to be read-only |
| * Rev. 1.5, Enclose all #define statements with parentheses |
| * Rev. 1.6, Defined vectors for USART (in addition to UART) |
| * Rev. 1.7, Added USART special function labels (UxME, UxIE, UxIFG) |
| * Rev. 2.1, Alignment of defintions in Users Guide and of version numbers |
| * Rev. 2.2, Fixed type in ADC12 bit definitions (replaced ADC10 with ADC12) |
| * Rev. 2.3, Removed unused def of TASSEL2 / TBSSEL2 |
| * Rev. 2.4, added definitions for Interrupt Vectors xxIV |
| * |
| ********************************************************************/ |
| |
| #ifndef __msp430x14x |
| #define __msp430x14x |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| /*----------------------------------------------------------------------------*/ |
| /* PERIPHERAL FILE MAP */ |
| /*----------------------------------------------------------------------------*/ |
| |
| /* External references resolved by a device-specific linker command file */ |
| #define SFR_8BIT(address) extern volatile unsigned char address |
| #define SFR_16BIT(address) extern volatile unsigned int address |
| |
| |
| /************************************************************ |
| * STANDARD BITS |
| ************************************************************/ |
| |
| #define BIT0 (0x0001) |
| #define BIT1 (0x0002) |
| #define BIT2 (0x0004) |
| #define BIT3 (0x0008) |
| #define BIT4 (0x0010) |
| #define BIT5 (0x0020) |
| #define BIT6 (0x0040) |
| #define BIT7 (0x0080) |
| #define BIT8 (0x0100) |
| #define BIT9 (0x0200) |
| #define BITA (0x0400) |
| #define BITB (0x0800) |
| #define BITC (0x1000) |
| #define BITD (0x2000) |
| #define BITE (0x4000) |
| #define BITF (0x8000) |
| |
| /************************************************************ |
| * STATUS REGISTER BITS |
| ************************************************************/ |
| |
| #define C (0x0001) |
| #define Z (0x0002) |
| #define N (0x0004) |
| #define V (0x0100) |
| #define GIE (0x0008) |
| #define CPUOFF (0x0010) |
| #define OSCOFF (0x0020) |
| #define SCG0 (0x0040) |
| #define SCG1 (0x0080) |
| |
| /* Low Power Modes coded with Bits 4-7 in SR */ |
| |
| #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ |
| #define LPM0 (CPUOFF) |
| #define LPM1 (SCG0+CPUOFF) |
| #define LPM2 (SCG1+CPUOFF) |
| #define LPM3 (SCG1+SCG0+CPUOFF) |
| #define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF) |
| /* End #defines for assembler */ |
| |
| #else /* Begin #defines for C */ |
| #define LPM0_bits (CPUOFF) |
| #define LPM1_bits (SCG0+CPUOFF) |
| #define LPM2_bits (SCG1+CPUOFF) |
| #define LPM3_bits (SCG1+SCG0+CPUOFF) |
| #define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF) |
| |
| #include <In430.h> |
| |
| #define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */ |
| #define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */ |
| #define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */ |
| #define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */ |
| #define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */ |
| #define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */ |
| #define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */ |
| #define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */ |
| #define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */ |
| #define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */ |
| #endif /* End #defines for C */ |
| |
| /************************************************************ |
| * PERIPHERAL FILE MAP |
| ************************************************************/ |
| |
| /************************************************************ |
| * SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS |
| ************************************************************/ |
| |
| SFR_8BIT(IE1); /* Interrupt Enable 1 */ |
| #define U0IE IE1 /* UART0 Interrupt Enable Register */ |
| #define WDTIE (0x01) |
| #define OFIE (0x02) |
| #define NMIIE (0x10) |
| #define ACCVIE (0x20) |
| #define URXIE0 (0x40) |
| #define UTXIE0 (0x80) |
| |
| SFR_8BIT(IFG1); /* Interrupt Flag 1 */ |
| #define U0IFG IFG1 /* UART0 Interrupt Flag Register */ |
| #define WDTIFG (0x01) |
| #define OFIFG (0x02) |
| #define NMIIFG (0x10) |
| #define URXIFG0 (0x40) |
| #define UTXIFG0 (0x80) |
| |
| SFR_8BIT(ME1); /* Module Enable 1 */ |
| #define U0ME ME1 /* UART0 Module Enable Register */ |
| #define URXE0 (0x40) |
| #define UTXE0 (0x80) |
| #define USPIE0 (0x40) |
| |
| SFR_8BIT(IE2); /* Interrupt Enable 2 */ |
| #define U1IE IE2 /* UART1 Interrupt Enable Register */ |
| #define URXIE1 (0x10) |
| #define UTXIE1 (0x20) |
| |
| SFR_8BIT(IFG2); /* Interrupt Flag 2 */ |
| #define U1IFG IFG2 /* UART1 Interrupt Flag Register */ |
| #define URXIFG1 (0x10) |
| #define UTXIFG1 (0x20) |
| |
| SFR_8BIT(ME2); /* Module Enable 2 */ |
| #define U1ME ME2 /* UART1 Module Enable Register */ |
| #define URXE1 (0x10) |
| #define UTXE1 (0x20) |
| #define USPIE1 (0x10) |
| |
| /************************************************************ |
| * WATCHDOG TIMER |
| ************************************************************/ |
| #define __MSP430_HAS_WDT__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(WDTCTL); /* Watchdog Timer Control */ |
| /* The bit names have been prefixed with "WDT" */ |
| #define WDTIS0 (0x0001) |
| #define WDTIS1 (0x0002) |
| #define WDTSSEL (0x0004) |
| #define WDTCNTCL (0x0008) |
| #define WDTTMSEL (0x0010) |
| #define WDTNMI (0x0020) |
| #define WDTNMIES (0x0040) |
| #define WDTHOLD (0x0080) |
| |
| #define WDTPW (0x5A00) |
| |
| /* WDT-interval times [1ms] coded with Bits 0-2 */ |
| /* WDT is clocked by fSMCLK (assumed 1MHz) */ |
| #define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */ |
| #define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */ |
| #define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */ |
| #define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */ |
| /* WDT is clocked by fACLK (assumed 32KHz) */ |
| #define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */ |
| #define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */ |
| #define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */ |
| #define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */ |
| /* Watchdog mode -> reset after expired time */ |
| /* WDT is clocked by fSMCLK (assumed 1MHz) */ |
| #define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */ |
| #define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */ |
| #define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */ |
| #define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */ |
| /* WDT is clocked by fACLK (assumed 32KHz) */ |
| #define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */ |
| #define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */ |
| #define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */ |
| #define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */ |
| |
| /* INTERRUPT CONTROL */ |
| /* These two bits are defined in the Special Function Registers */ |
| /* #define WDTIE 0x01 */ |
| /* #define WDTIFG 0x01 */ |
| |
| /************************************************************ |
| * HARDWARE MULTIPLIER |
| ************************************************************/ |
| #define __MSP430_HAS_MPY__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(MPY); /* Multiply Unsigned/Operand 1 */ |
| SFR_16BIT(MPYS); /* Multiply Signed/Operand 1 */ |
| SFR_16BIT(MAC); /* Multiply Unsigned and Accumulate/Operand 1 */ |
| SFR_16BIT(MACS); /* Multiply Signed and Accumulate/Operand 1 */ |
| SFR_16BIT(OP2); /* Operand 2 */ |
| SFR_16BIT(RESLO); /* Result Low Word */ |
| SFR_16BIT(RESHI); /* Result High Word */ |
| SFR_16BIT(SUMEXT); /* Sum Extend */ |
| |
| /************************************************************ |
| * DIGITAL I/O Port1/2 |
| ************************************************************/ |
| #define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */ |
| #define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(P1IN); /* Port 1 Input */ |
| SFR_8BIT(P1OUT); /* Port 1 Output */ |
| SFR_8BIT(P1DIR); /* Port 1 Direction */ |
| SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */ |
| SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */ |
| SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */ |
| SFR_8BIT(P1SEL); /* Port 1 Selection */ |
| |
| SFR_8BIT(P2IN); /* Port 2 Input */ |
| SFR_8BIT(P2OUT); /* Port 2 Output */ |
| SFR_8BIT(P2DIR); /* Port 2 Direction */ |
| SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */ |
| SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */ |
| SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */ |
| SFR_8BIT(P2SEL); /* Port 2 Selection */ |
| |
| /************************************************************ |
| * DIGITAL I/O Port3/4 |
| ************************************************************/ |
| #define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */ |
| #define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(P3IN); /* Port 3 Input */ |
| SFR_8BIT(P3OUT); /* Port 3 Output */ |
| SFR_8BIT(P3DIR); /* Port 3 Direction */ |
| SFR_8BIT(P3SEL); /* Port 3 Selection */ |
| |
| SFR_8BIT(P4IN); /* Port 4 Input */ |
| SFR_8BIT(P4OUT); /* Port 4 Output */ |
| SFR_8BIT(P4DIR); /* Port 4 Direction */ |
| SFR_8BIT(P4SEL); /* Port 4 Selection */ |
| |
| /************************************************************ |
| * DIGITAL I/O Port5/6 |
| ************************************************************/ |
| #define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */ |
| #define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(P5IN); /* Port 5 Input */ |
| SFR_8BIT(P5OUT); /* Port 5 Output */ |
| SFR_8BIT(P5DIR); /* Port 5 Direction */ |
| SFR_8BIT(P5SEL); /* Port 5 Selection */ |
| |
| SFR_8BIT(P6IN); /* Port 6 Input */ |
| SFR_8BIT(P6OUT); /* Port 6 Output */ |
| SFR_8BIT(P6DIR); /* Port 6 Direction */ |
| SFR_8BIT(P6SEL); /* Port 6 Selection */ |
| |
| /************************************************************ |
| * USART |
| ************************************************************/ |
| |
| /* UxCTL */ |
| #define PENA (0x80) /* Parity enable */ |
| #define PEV (0x40) /* Parity 0:odd / 1:even */ |
| #define SPB (0x20) /* Stop Bits 0:one / 1: two */ |
| #define CHAR (0x10) /* Data 0:7-bits / 1:8-bits */ |
| #define LISTEN (0x08) /* Listen mode */ |
| #define SYNC (0x04) /* UART / SPI mode */ |
| #define MM (0x02) /* Master Mode off/on */ |
| #define SWRST (0x01) /* USART Software Reset */ |
| |
| /* UxTCTL */ |
| #define CKPH (0x80) /* SPI: Clock Phase */ |
| #define CKPL (0x40) /* Clock Polarity */ |
| #define SSEL1 (0x20) /* Clock Source Select 1 */ |
| #define SSEL0 (0x10) /* Clock Source Select 0 */ |
| #define URXSE (0x08) /* Receive Start edge select */ |
| #define TXWAKE (0x04) /* TX Wake up mode */ |
| #define STC (0x02) /* SPI: STC enable 0:on / 1:off */ |
| #define TXEPT (0x01) /* TX Buffer empty */ |
| |
| /* UxRCTL */ |
| #define FE (0x80) /* Frame Error */ |
| #define PE (0x40) /* Parity Error */ |
| #define OE (0x20) /* Overrun Error */ |
| #define BRK (0x10) /* Break detected */ |
| #define URXEIE (0x08) /* RX Error interrupt enable */ |
| #define URXWIE (0x04) /* RX Wake up interrupt enable */ |
| #define RXWAKE (0x02) /* RX Wake up detect */ |
| #define RXERR (0x01) /* RX Error Error */ |
| |
| /************************************************************ |
| * USART 0 |
| ************************************************************/ |
| #define __MSP430_HAS_UART0__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(U0CTL); /* USART 0 Control */ |
| SFR_8BIT(U0TCTL); /* USART 0 Transmit Control */ |
| SFR_8BIT(U0RCTL); /* USART 0 Receive Control */ |
| SFR_8BIT(U0MCTL); /* USART 0 Modulation Control */ |
| SFR_8BIT(U0BR0); /* USART 0 Baud Rate 0 */ |
| SFR_8BIT(U0BR1); /* USART 0 Baud Rate 1 */ |
| SFR_8BIT(U0RXBUF); /* USART 0 Receive Buffer */ |
| SFR_8BIT(U0TXBUF); /* USART 0 Transmit Buffer */ |
| |
| /* Alternate register names */ |
| |
| #define UCTL0 U0CTL /* USART 0 Control */ |
| #define UTCTL0 U0TCTL /* USART 0 Transmit Control */ |
| #define URCTL0 U0RCTL /* USART 0 Receive Control */ |
| #define UMCTL0 U0MCTL /* USART 0 Modulation Control */ |
| #define UBR00 U0BR0 /* USART 0 Baud Rate 0 */ |
| #define UBR10 U0BR1 /* USART 0 Baud Rate 1 */ |
| #define RXBUF0 U0RXBUF /* USART 0 Receive Buffer */ |
| #define TXBUF0 U0TXBUF /* USART 0 Transmit Buffer */ |
| #define UCTL0_ U0CTL_ /* USART 0 Control */ |
| #define UTCTL0_ U0TCTL_ /* USART 0 Transmit Control */ |
| #define URCTL0_ U0RCTL_ /* USART 0 Receive Control */ |
| #define UMCTL0_ U0MCTL_ /* USART 0 Modulation Control */ |
| #define UBR00_ U0BR0_ /* USART 0 Baud Rate 0 */ |
| #define UBR10_ U0BR1_ /* USART 0 Baud Rate 1 */ |
| #define RXBUF0_ U0RXBUF_ /* USART 0 Receive Buffer */ |
| #define TXBUF0_ U0TXBUF_ /* USART 0 Transmit Buffer */ |
| #define UCTL_0 U0CTL /* USART 0 Control */ |
| #define UTCTL_0 U0TCTL /* USART 0 Transmit Control */ |
| #define URCTL_0 U0RCTL /* USART 0 Receive Control */ |
| #define UMCTL_0 U0MCTL /* USART 0 Modulation Control */ |
| #define UBR0_0 U0BR0 /* USART 0 Baud Rate 0 */ |
| #define UBR1_0 U0BR1 /* USART 0 Baud Rate 1 */ |
| #define RXBUF_0 U0RXBUF /* USART 0 Receive Buffer */ |
| #define TXBUF_0 U0TXBUF /* USART 0 Transmit Buffer */ |
| #define UCTL_0_ U0CTL_ /* USART 0 Control */ |
| #define UTCTL_0_ U0TCTL_ /* USART 0 Transmit Control */ |
| #define URCTL_0_ U0RCTL_ /* USART 0 Receive Control */ |
| #define UMCTL_0_ U0MCTL_ /* USART 0 Modulation Control */ |
| #define UBR0_0_ U0BR0_ /* USART 0 Baud Rate 0 */ |
| #define UBR1_0_ U0BR1_ /* USART 0 Baud Rate 1 */ |
| #define RXBUF_0_ U0RXBUF_ /* USART 0 Receive Buffer */ |
| #define TXBUF_0_ U0TXBUF_ /* USART 0 Transmit Buffer */ |
| |
| /************************************************************ |
| * USART 1 |
| ************************************************************/ |
| #define __MSP430_HAS_UART1__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(U1CTL); /* USART 1 Control */ |
| SFR_8BIT(U1TCTL); /* USART 1 Transmit Control */ |
| SFR_8BIT(U1RCTL); /* USART 1 Receive Control */ |
| SFR_8BIT(U1MCTL); /* USART 1 Modulation Control */ |
| SFR_8BIT(U1BR0); /* USART 1 Baud Rate 0 */ |
| SFR_8BIT(U1BR1); /* USART 1 Baud Rate 1 */ |
| SFR_8BIT(U1RXBUF); /* USART 1 Receive Buffer */ |
| SFR_8BIT(U1TXBUF); /* USART 1 Transmit Buffer */ |
| |
| /* Alternate register names */ |
| |
| #define UCTL1 U1CTL /* USART 1 Control */ |
| #define UTCTL1 U1TCTL /* USART 1 Transmit Control */ |
| #define URCTL1 U1RCTL /* USART 1 Receive Control */ |
| #define UMCTL1 U1MCTL /* USART 1 Modulation Control */ |
| #define UBR01 U1BR0 /* USART 1 Baud Rate 0 */ |
| #define UBR11 U1BR1 /* USART 1 Baud Rate 1 */ |
| #define RXBUF1 U1RXBUF /* USART 1 Receive Buffer */ |
| #define TXBUF1 U1TXBUF /* USART 1 Transmit Buffer */ |
| #define UCTL1_ U1CTL_ /* USART 1 Control */ |
| #define UTCTL1_ U1TCTL_ /* USART 1 Transmit Control */ |
| #define URCTL1_ U1RCTL_ /* USART 1 Receive Control */ |
| #define UMCTL1_ U1MCTL_ /* USART 1 Modulation Control */ |
| #define UBR01_ U1BR0_ /* USART 1 Baud Rate 0 */ |
| #define UBR11_ U1BR1_ /* USART 1 Baud Rate 1 */ |
| #define RXBUF1_ U1RXBUF_ /* USART 1 Receive Buffer */ |
| #define TXBUF1_ U1TXBUF_ /* USART 1 Transmit Buffer */ |
| #define UCTL_1 U1CTL /* USART 1 Control */ |
| #define UTCTL_1 U1TCTL /* USART 1 Transmit Control */ |
| #define URCTL_1 U1RCTL /* USART 1 Receive Control */ |
| #define UMCTL_1 U1MCTL /* USART 1 Modulation Control */ |
| #define UBR0_1 U1BR0 /* USART 1 Baud Rate 0 */ |
| #define UBR1_1 U1BR1 /* USART 1 Baud Rate 1 */ |
| #define RXBUF_1 U1RXBUF /* USART 1 Receive Buffer */ |
| #define TXBUF_1 U1TXBUF /* USART 1 Transmit Buffer */ |
| #define UCTL_1_ U1CTL_ /* USART 1 Control */ |
| #define UTCTL_1_ U1TCTL_ /* USART 1 Transmit Control */ |
| #define URCTL_1_ U1RCTL_ /* USART 1 Receive Control */ |
| #define UMCTL_1_ U1MCTL_ /* USART 1 Modulation Control */ |
| #define UBR0_1_ U1BR0_ /* USART 1 Baud Rate 0 */ |
| #define UBR1_1_ U1BR1_ /* USART 1 Baud Rate 1 */ |
| #define RXBUF_1_ U1RXBUF_ /* USART 1 Receive Buffer */ |
| #define TXBUF_1_ U1TXBUF_ /* USART 1 Transmit Buffer */ |
| |
| /************************************************************ |
| * Timer A3 |
| ************************************************************/ |
| #define __MSP430_HAS_TA3__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(TAIV); /* Timer A Interrupt Vector Word */ |
| SFR_16BIT(TACTL); /* Timer A Control */ |
| SFR_16BIT(TACCTL0); /* Timer A Capture/Compare Control 0 */ |
| SFR_16BIT(TACCTL1); /* Timer A Capture/Compare Control 1 */ |
| SFR_16BIT(TACCTL2); /* Timer A Capture/Compare Control 2 */ |
| SFR_16BIT(TAR); /* Timer A */ |
| SFR_16BIT(TACCR0); /* Timer A Capture/Compare 0 */ |
| SFR_16BIT(TACCR1); /* Timer A Capture/Compare 1 */ |
| SFR_16BIT(TACCR2); /* Timer A Capture/Compare 2 */ |
| |
| /* Alternate register names */ |
| #define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */ |
| #define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */ |
| #define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */ |
| #define CCR0 TACCR0 /* Timer A Capture/Compare 0 */ |
| #define CCR1 TACCR1 /* Timer A Capture/Compare 1 */ |
| #define CCR2 TACCR2 /* Timer A Capture/Compare 2 */ |
| #define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */ |
| #define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */ |
| #define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */ |
| #define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */ |
| #define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */ |
| #define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */ |
| |
| #define TASSEL1 (0x0200) /* Timer A clock source select 0 */ |
| #define TASSEL0 (0x0100) /* Timer A clock source select 1 */ |
| #define ID1 (0x0080) /* Timer A clock input divider 1 */ |
| #define ID0 (0x0040) /* Timer A clock input divider 0 */ |
| #define MC1 (0x0020) /* Timer A mode control 1 */ |
| #define MC0 (0x0010) /* Timer A mode control 0 */ |
| #define TACLR (0x0004) /* Timer A counter clear */ |
| #define TAIE (0x0002) /* Timer A counter interrupt enable */ |
| #define TAIFG (0x0001) /* Timer A counter interrupt flag */ |
| |
| #define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */ |
| #define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */ |
| #define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */ |
| #define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */ |
| #define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */ |
| #define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */ |
| #define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */ |
| #define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */ |
| #define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */ |
| #define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */ |
| #define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */ |
| #define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */ |
| |
| #define CM1 (0x8000) /* Capture mode 1 */ |
| #define CM0 (0x4000) /* Capture mode 0 */ |
| #define CCIS1 (0x2000) /* Capture input select 1 */ |
| #define CCIS0 (0x1000) /* Capture input select 0 */ |
| #define SCS (0x0800) /* Capture sychronize */ |
| #define SCCI (0x0400) /* Latched capture signal (read) */ |
| #define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */ |
| #define OUTMOD2 (0x0080) /* Output mode 2 */ |
| #define OUTMOD1 (0x0040) /* Output mode 1 */ |
| #define OUTMOD0 (0x0020) /* Output mode 0 */ |
| #define CCIE (0x0010) /* Capture/compare interrupt enable */ |
| #define CCI (0x0008) /* Capture input signal (read) */ |
| #define OUT (0x0004) /* PWM Output signal if output mode 0 */ |
| #define COV (0x0002) /* Capture/compare overflow flag */ |
| #define CCIFG (0x0001) /* Capture/compare interrupt flag */ |
| |
| #define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */ |
| #define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */ |
| #define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */ |
| #define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */ |
| #define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */ |
| #define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */ |
| #define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */ |
| #define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */ |
| #define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */ |
| #define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */ |
| #define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */ |
| #define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */ |
| #define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */ |
| #define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */ |
| #define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */ |
| #define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges */ |
| |
| /* TA3IV Definitions */ |
| #define TAIV_NONE (0x0000) /* No Interrupt pending */ |
| #define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */ |
| #define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */ |
| #define TAIV_6 (0x0006) /* Reserved */ |
| #define TAIV_8 (0x0008) /* Reserved */ |
| #define TAIV_TAIFG (0x000A) /* TAIFG */ |
| |
| /************************************************************ |
| * Timer B7 |
| ************************************************************/ |
| #define __MSP430_HAS_TB7__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(TBIV); /* Timer B Interrupt Vector Word */ |
| SFR_16BIT(TBCTL); /* Timer B Control */ |
| SFR_16BIT(TBCCTL0); /* Timer B Capture/Compare Control 0 */ |
| SFR_16BIT(TBCCTL1); /* Timer B Capture/Compare Control 1 */ |
| SFR_16BIT(TBCCTL2); /* Timer B Capture/Compare Control 2 */ |
| SFR_16BIT(TBCCTL3); /* Timer B Capture/Compare Control 3 */ |
| SFR_16BIT(TBCCTL4); /* Timer B Capture/Compare Control 4 */ |
| SFR_16BIT(TBCCTL5); /* Timer B Capture/Compare Control 5 */ |
| SFR_16BIT(TBCCTL6); /* Timer B Capture/Compare Control 6 */ |
| SFR_16BIT(TBR); /* Timer B */ |
| SFR_16BIT(TBCCR0); /* Timer B Capture/Compare 0 */ |
| SFR_16BIT(TBCCR1); /* Timer B Capture/Compare 1 */ |
| SFR_16BIT(TBCCR2); /* Timer B Capture/Compare 2 */ |
| SFR_16BIT(TBCCR3); /* Timer B Capture/Compare 3 */ |
| SFR_16BIT(TBCCR4); /* Timer B Capture/Compare 4 */ |
| SFR_16BIT(TBCCR5); /* Timer B Capture/Compare 5 */ |
| SFR_16BIT(TBCCR6); /* Timer B Capture/Compare 6 */ |
| |
| #define TBCLGRP1 (0x4000) /* Timer B Compare latch load group 1 */ |
| #define TBCLGRP0 (0x2000) /* Timer B Compare latch load group 0 */ |
| #define CNTL1 (0x1000) /* Counter lenght 1 */ |
| #define CNTL0 (0x0800) /* Counter lenght 0 */ |
| #define TBSSEL1 (0x0200) /* Clock source 1 */ |
| #define TBSSEL0 (0x0100) /* Clock source 0 */ |
| #define TBCLR (0x0004) /* Timer B counter clear */ |
| #define TBIE (0x0002) /* Timer B interrupt enable */ |
| #define TBIFG (0x0001) /* Timer B interrupt flag */ |
| |
| #define SHR1 (0x4000) /* Timer B Compare latch load group 1 */ |
| #define SHR0 (0x2000) /* Timer B Compare latch load group 0 */ |
| |
| #define TBSSEL_0 (0*0x0100u) /* Clock Source: TBCLK */ |
| #define TBSSEL_1 (1*0x0100u) /* Clock Source: ACLK */ |
| #define TBSSEL_2 (2*0x0100u) /* Clock Source: SMCLK */ |
| #define TBSSEL_3 (3*0x0100u) /* Clock Source: INCLK */ |
| #define CNTL_0 (0*0x0800u) /* Counter lenght: 16 bit */ |
| #define CNTL_1 (1*0x0800u) /* Counter lenght: 12 bit */ |
| #define CNTL_2 (2*0x0800u) /* Counter lenght: 10 bit */ |
| #define CNTL_3 (3*0x0800u) /* Counter lenght: 8 bit */ |
| #define SHR_0 (0*0x2000u) /* Timer B Group: 0 - individually */ |
| #define SHR_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */ |
| #define SHR_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/ |
| #define SHR_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */ |
| #define TBCLGRP_0 (0*0x2000u) /* Timer B Group: 0 - individually */ |
| #define TBCLGRP_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */ |
| #define TBCLGRP_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/ |
| #define TBCLGRP_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */ |
| |
| /* Additional Timer B Control Register bits are defined in Timer A */ |
| #define CLLD1 (0x0400) /* Compare latch load source 1 */ |
| #define CLLD0 (0x0200) /* Compare latch load source 0 */ |
| |
| #define SLSHR1 (0x0400) /* Compare latch load source 1 */ |
| #define SLSHR0 (0x0200) /* Compare latch load source 0 */ |
| |
| #define SLSHR_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */ |
| #define SLSHR_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */ |
| #define SLSHR_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */ |
| #define SLSHR_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */ |
| |
| #define CLLD_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */ |
| #define CLLD_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */ |
| #define CLLD_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */ |
| #define CLLD_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */ |
| |
| /* TB7IV Definitions */ |
| #define TBIV_NONE (0x0000) /* No Interrupt pending */ |
| #define TBIV_TBCCR1 (0x0002) /* TBCCR1_CCIFG */ |
| #define TBIV_TBCCR2 (0x0004) /* TBCCR2_CCIFG */ |
| #define TBIV_TBCCR3 (0x0006) /* TBCCR3_CCIFG */ |
| #define TBIV_TBCCR4 (0x0008) /* TBCCR4_CCIFG */ |
| #define TBIV_TBCCR5 (0x000A) /* TBCCR3_CCIFG */ |
| #define TBIV_TBCCR6 (0x000C) /* TBCCR4_CCIFG */ |
| #define TBIV_TBIFG (0x000E) /* TBIFG */ |
| |
| /************************************************************ |
| * Basic Clock Module |
| ************************************************************/ |
| #define __MSP430_HAS_BASIC_CLOCK__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(DCOCTL); /* DCO Clock Frequency Control */ |
| SFR_8BIT(BCSCTL1); /* Basic Clock System Control 1 */ |
| SFR_8BIT(BCSCTL2); /* Basic Clock System Control 2 */ |
| |
| #define MOD0 (0x01) /* Modulation Bit 0 */ |
| #define MOD1 (0x02) /* Modulation Bit 1 */ |
| #define MOD2 (0x04) /* Modulation Bit 2 */ |
| #define MOD3 (0x08) /* Modulation Bit 3 */ |
| #define MOD4 (0x10) /* Modulation Bit 4 */ |
| #define DCO0 (0x20) /* DCO Select Bit 0 */ |
| #define DCO1 (0x40) /* DCO Select Bit 1 */ |
| #define DCO2 (0x80) /* DCO Select Bit 2 */ |
| |
| #define RSEL0 (0x01) /* Range Select Bit 0 */ |
| #define RSEL1 (0x02) /* Range Select Bit 1 */ |
| #define RSEL2 (0x04) /* Range Select Bit 2 */ |
| #define XT5V (0x08) /* XT5V should always be reset */ |
| #define DIVA0 (0x10) /* ACLK Divider 0 */ |
| #define DIVA1 (0x20) /* ACLK Divider 1 */ |
| #define XTS (0x40) /* LFXTCLK 0:Low Freq. / 1: High Freq. */ |
| #define XT2OFF (0x80) /* Enable XT2CLK */ |
| |
| #define DIVA_0 (0x00) /* ACLK Divider 0: /1 */ |
| #define DIVA_1 (0x10) /* ACLK Divider 1: /2 */ |
| #define DIVA_2 (0x20) /* ACLK Divider 2: /4 */ |
| #define DIVA_3 (0x30) /* ACLK Divider 3: /8 */ |
| |
| #define DCOR (0x01) /* Enable External Resistor : 1 */ |
| #define DIVS0 (0x02) /* SMCLK Divider 0 */ |
| #define DIVS1 (0x04) /* SMCLK Divider 1 */ |
| #define SELS (0x08) /* SMCLK Source Select 0:DCOCLK / 1:XT2CLK/LFXTCLK */ |
| #define DIVM0 (0x10) /* MCLK Divider 0 */ |
| #define DIVM1 (0x20) /* MCLK Divider 1 */ |
| #define SELM0 (0x40) /* MCLK Source Select 0 */ |
| #define SELM1 (0x80) /* MCLK Source Select 1 */ |
| |
| #define DIVS_0 (0x00) /* SMCLK Divider 0: /1 */ |
| #define DIVS_1 (0x02) /* SMCLK Divider 1: /2 */ |
| #define DIVS_2 (0x04) /* SMCLK Divider 2: /4 */ |
| #define DIVS_3 (0x06) /* SMCLK Divider 3: /8 */ |
| |
| #define DIVM_0 (0x00) /* MCLK Divider 0: /1 */ |
| #define DIVM_1 (0x10) /* MCLK Divider 1: /2 */ |
| #define DIVM_2 (0x20) /* MCLK Divider 2: /4 */ |
| #define DIVM_3 (0x30) /* MCLK Divider 3: /8 */ |
| |
| #define SELM_0 (0x00) /* MCLK Source Select 0: DCOCLK */ |
| #define SELM_1 (0x40) /* MCLK Source Select 1: DCOCLK */ |
| #define SELM_2 (0x80) /* MCLK Source Select 2: XT2CLK/LFXTCLK */ |
| #define SELM_3 (0xC0) /* MCLK Source Select 3: LFXTCLK */ |
| |
| /************************************************************* |
| * Flash Memory |
| *************************************************************/ |
| #define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(FCTL1); /* FLASH Control 1 */ |
| SFR_16BIT(FCTL2); /* FLASH Control 2 */ |
| SFR_16BIT(FCTL3); /* FLASH Control 3 */ |
| |
| #define FRKEY (0x9600) /* Flash key returned by read */ |
| #define FWKEY (0xA500) /* Flash key for write */ |
| #define FXKEY (0x3300) /* for use with XOR instruction */ |
| |
| #define ERASE (0x0002) /* Enable bit for Flash segment erase */ |
| #define MERAS (0x0004) /* Enable bit for Flash mass erase */ |
| #define WRT (0x0040) /* Enable bit for Flash write */ |
| #define BLKWRT (0x0080) /* Enable bit for Flash segment write */ |
| #define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */ |
| |
| #define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */ |
| #define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */ |
| #ifndef FN2 |
| #define FN2 (0x0004) |
| #endif |
| #ifndef FN3 |
| #define FN3 (0x0008) |
| #endif |
| #ifndef FN4 |
| #define FN4 (0x0010) |
| #endif |
| #define FN5 (0x0020) |
| #define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */ |
| #define FSSEL1 (0x0080) /* Flash clock select 1 */ |
| |
| #define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */ |
| #define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */ |
| #define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */ |
| #define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */ |
| |
| #define BUSY (0x0001) /* Flash busy: 1 */ |
| #define KEYV (0x0002) /* Flash Key violation flag */ |
| #define ACCVIFG (0x0004) /* Flash Access violation flag */ |
| #define WAIT (0x0008) /* Wait flag for segment write */ |
| #define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */ |
| #define EMEX (0x0020) /* Flash Emergency Exit */ |
| |
| /************************************************************ |
| * Comparator A |
| ************************************************************/ |
| #define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(CACTL1); /* Comparator A Control 1 */ |
| SFR_8BIT(CACTL2); /* Comparator A Control 2 */ |
| SFR_8BIT(CAPD); /* Comparator A Port Disable */ |
| |
| #define CAIFG (0x01) /* Comp. A Interrupt Flag */ |
| #define CAIE (0x02) /* Comp. A Interrupt Enable */ |
| #define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */ |
| #define CAON (0x08) /* Comp. A enable */ |
| #define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */ |
| #define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */ |
| #define CARSEL (0x40) /* Comp. A Internal Reference Enable */ |
| #define CAEX (0x80) /* Comp. A Exchange Inputs */ |
| |
| #define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */ |
| #define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */ |
| #define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */ |
| #define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/ |
| |
| #define CAOUT (0x01) /* Comp. A Output */ |
| #define CAF (0x02) /* Comp. A Enable Output Filter */ |
| #define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */ |
| #define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */ |
| #define CACTL24 (0x10) |
| #define CACTL25 (0x20) |
| #define CACTL26 (0x40) |
| #define CACTL27 (0x80) |
| |
| #define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */ |
| #define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */ |
| #define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */ |
| #define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */ |
| #define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */ |
| #define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */ |
| #define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */ |
| #define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */ |
| |
| /************************************************************ |
| * ADC12 |
| ************************************************************/ |
| #define __MSP430_HAS_ADC12__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(ADC12CTL0); /* ADC12 Control 0 */ |
| SFR_16BIT(ADC12CTL1); /* ADC12 Control 1 */ |
| SFR_16BIT(ADC12IFG); /* ADC12 Interrupt Flag */ |
| SFR_16BIT(ADC12IE); /* ADC12 Interrupt Enable */ |
| SFR_16BIT(ADC12IV); /* ADC12 Interrupt Vector Word */ |
| |
| #define ADC12MEM_ (0x0140) /* ADC12 Conversion Memory */ |
| #ifdef __ASM_HEADER__ |
| #define ADC12MEM (ADC12MEM_) /* ADC12 Conversion Memory (for assembler) */ |
| #else |
| #define ADC12MEM ((int*) ADC12MEM_) /* ADC12 Conversion Memory (for C) */ |
| #endif |
| SFR_16BIT(ADC12MEM0); /* ADC12 Conversion Memory 0 */ |
| SFR_16BIT(ADC12MEM1); /* ADC12 Conversion Memory 1 */ |
| SFR_16BIT(ADC12MEM2); /* ADC12 Conversion Memory 2 */ |
| SFR_16BIT(ADC12MEM3); /* ADC12 Conversion Memory 3 */ |
| SFR_16BIT(ADC12MEM4); /* ADC12 Conversion Memory 4 */ |
| SFR_16BIT(ADC12MEM5); /* ADC12 Conversion Memory 5 */ |
| SFR_16BIT(ADC12MEM6); /* ADC12 Conversion Memory 6 */ |
| SFR_16BIT(ADC12MEM7); /* ADC12 Conversion Memory 7 */ |
| SFR_16BIT(ADC12MEM8); /* ADC12 Conversion Memory 8 */ |
| SFR_16BIT(ADC12MEM9); /* ADC12 Conversion Memory 9 */ |
| SFR_16BIT(ADC12MEM10); /* ADC12 Conversion Memory 10 */ |
| SFR_16BIT(ADC12MEM11); /* ADC12 Conversion Memory 11 */ |
| SFR_16BIT(ADC12MEM12); /* ADC12 Conversion Memory 12 */ |
| SFR_16BIT(ADC12MEM13); /* ADC12 Conversion Memory 13 */ |
| SFR_16BIT(ADC12MEM14); /* ADC12 Conversion Memory 14 */ |
| SFR_16BIT(ADC12MEM15); /* ADC12 Conversion Memory 15 */ |
| |
| #define ADC12MCTL_ (0x0080) /* ADC12 Memory Control */ |
| #ifdef __ASM_HEADER__ |
| #define ADC12MCTL (ADC12MCTL_) /* ADC12 Memory Control (for assembler) */ |
| #else |
| #define ADC12MCTL ((char*) ADC12MCTL_) /* ADC12 Memory Control (for C) */ |
| #endif |
| SFR_8BIT(ADC12MCTL0); /* ADC12 Memory Control 0 */ |
| SFR_8BIT(ADC12MCTL1); /* ADC12 Memory Control 1 */ |
| SFR_8BIT(ADC12MCTL2); /* ADC12 Memory Control 2 */ |
| SFR_8BIT(ADC12MCTL3); /* ADC12 Memory Control 3 */ |
| SFR_8BIT(ADC12MCTL4); /* ADC12 Memory Control 4 */ |
| SFR_8BIT(ADC12MCTL5); /* ADC12 Memory Control 5 */ |
| SFR_8BIT(ADC12MCTL6); /* ADC12 Memory Control 6 */ |
| SFR_8BIT(ADC12MCTL7); /* ADC12 Memory Control 7 */ |
| SFR_8BIT(ADC12MCTL8); /* ADC12 Memory Control 8 */ |
| SFR_8BIT(ADC12MCTL9); /* ADC12 Memory Control 9 */ |
| SFR_8BIT(ADC12MCTL10); /* ADC12 Memory Control 10 */ |
| SFR_8BIT(ADC12MCTL11); /* ADC12 Memory Control 11 */ |
| SFR_8BIT(ADC12MCTL12); /* ADC12 Memory Control 12 */ |
| SFR_8BIT(ADC12MCTL13); /* ADC12 Memory Control 13 */ |
| SFR_8BIT(ADC12MCTL14); /* ADC12 Memory Control 14 */ |
| SFR_8BIT(ADC12MCTL15); /* ADC12 Memory Control 15 */ |
| |
| /* ADC12CTL0 */ |
| #define ADC12SC (0x001) /* ADC12 Start Conversion */ |
| #define ENC (0x002) /* ADC12 Enable Conversion */ |
| #define ADC12TOVIE (0x004) /* ADC12 Timer Overflow interrupt enable */ |
| #define ADC12OVIE (0x008) /* ADC12 Overflow interrupt enable */ |
| #define ADC12ON (0x010) /* ADC12 On/enable */ |
| #define REFON (0x020) /* ADC12 Reference on */ |
| #define REF2_5V (0x040) /* ADC12 Ref 0:1.5V / 1:2.5V */ |
| #define MSC (0x080) /* ADC12 Multiple SampleConversion */ |
| #define SHT00 (0x0100) /* ADC12 Sample Hold 0 Select 0 */ |
| #define SHT01 (0x0200) /* ADC12 Sample Hold 0 Select 1 */ |
| #define SHT02 (0x0400) /* ADC12 Sample Hold 0 Select 2 */ |
| #define SHT03 (0x0800) /* ADC12 Sample Hold 0 Select 3 */ |
| #define SHT10 (0x1000) /* ADC12 Sample Hold 0 Select 0 */ |
| #define SHT11 (0x2000) /* ADC12 Sample Hold 1 Select 1 */ |
| #define SHT12 (0x4000) /* ADC12 Sample Hold 2 Select 2 */ |
| #define SHT13 (0x8000) /* ADC12 Sample Hold 3 Select 3 */ |
| #define MSH (0x080) |
| |
| #define SHT0_0 (0*0x100u) |
| #define SHT0_1 (1*0x100u) |
| #define SHT0_2 (2*0x100u) |
| #define SHT0_3 (3*0x100u) |
| #define SHT0_4 (4*0x100u) |
| #define SHT0_5 (5*0x100u) |
| #define SHT0_6 (6*0x100u) |
| #define SHT0_7 (7*0x100u) |
| #define SHT0_8 (8*0x100u) |
| #define SHT0_9 (9*0x100u) |
| #define SHT0_10 (10*0x100u) |
| #define SHT0_11 (11*0x100u) |
| #define SHT0_12 (12*0x100u) |
| #define SHT0_13 (13*0x100u) |
| #define SHT0_14 (14*0x100u) |
| #define SHT0_15 (15*0x100u) |
| |
| #define SHT1_0 (0*0x1000u) |
| #define SHT1_1 (1*0x1000u) |
| #define SHT1_2 (2*0x1000u) |
| #define SHT1_3 (3*0x1000u) |
| #define SHT1_4 (4*0x1000u) |
| #define SHT1_5 (5*0x1000u) |
| #define SHT1_6 (6*0x1000u) |
| #define SHT1_7 (7*0x1000u) |
| #define SHT1_8 (8*0x1000u) |
| #define SHT1_9 (9*0x1000u) |
| #define SHT1_10 (10*0x1000u) |
| #define SHT1_11 (11*0x1000u) |
| #define SHT1_12 (12*0x1000u) |
| #define SHT1_13 (13*0x1000u) |
| #define SHT1_14 (14*0x1000u) |
| #define SHT1_15 (15*0x1000u) |
| |
| /* ADC12CTL1 */ |
| #define ADC12BUSY (0x0001) /* ADC12 Busy */ |
| #define CONSEQ0 (0x0002) /* ADC12 Conversion Sequence Select 0 */ |
| #define CONSEQ1 (0x0004) /* ADC12 Conversion Sequence Select 1 */ |
| #define ADC12SSEL0 (0x0008) /* ADC12 Clock Source Select 0 */ |
| #define ADC12SSEL1 (0x0010) /* ADC12 Clock Source Select 1 */ |
| #define ADC12DIV0 (0x0020) /* ADC12 Clock Divider Select 0 */ |
| #define ADC12DIV1 (0x0040) /* ADC12 Clock Divider Select 1 */ |
| #define ADC12DIV2 (0x0080) /* ADC12 Clock Divider Select 2 */ |
| #define ISSH (0x0100) /* ADC12 Invert Sample Hold Signal */ |
| #define SHP (0x0200) /* ADC12 Sample/Hold Pulse Mode */ |
| #define SHS0 (0x0400) /* ADC12 Sample/Hold Source 0 */ |
| #define SHS1 (0x0800) /* ADC12 Sample/Hold Source 1 */ |
| #define CSTARTADD0 (0x1000) /* ADC12 Conversion Start Address 0 */ |
| #define CSTARTADD1 (0x2000) /* ADC12 Conversion Start Address 1 */ |
| #define CSTARTADD2 (0x4000) /* ADC12 Conversion Start Address 2 */ |
| #define CSTARTADD3 (0x8000) /* ADC12 Conversion Start Address 3 */ |
| |
| #define CONSEQ_0 (0*2u) |
| #define CONSEQ_1 (1*2u) |
| #define CONSEQ_2 (2*2u) |
| #define CONSEQ_3 (3*2u) |
| #define ADC12SSEL_0 (0*8u) |
| #define ADC12SSEL_1 (1*8u) |
| #define ADC12SSEL_2 (2*8u) |
| #define ADC12SSEL_3 (3*8u) |
| #define ADC12DIV_0 (0*0x20u) |
| #define ADC12DIV_1 (1*0x20u) |
| #define ADC12DIV_2 (2*0x20u) |
| #define ADC12DIV_3 (3*0x20u) |
| #define ADC12DIV_4 (4*0x20u) |
| #define ADC12DIV_5 (5*0x20u) |
| #define ADC12DIV_6 (6*0x20u) |
| #define ADC12DIV_7 (7*0x20u) |
| #define SHS_0 (0*0x400u) |
| #define SHS_1 (1*0x400u) |
| #define SHS_2 (2*0x400u) |
| #define SHS_3 (3*0x400u) |
| #define CSTARTADD_0 (0*0x1000u) |
| #define CSTARTADD_1 (1*0x1000u) |
| #define CSTARTADD_2 (2*0x1000u) |
| #define CSTARTADD_3 (3*0x1000u) |
| #define CSTARTADD_4 (4*0x1000u) |
| #define CSTARTADD_5 (5*0x1000u) |
| #define CSTARTADD_6 (6*0x1000u) |
| #define CSTARTADD_7 (7*0x1000u) |
| #define CSTARTADD_8 (8*0x1000u) |
| #define CSTARTADD_9 (9*0x1000u) |
| #define CSTARTADD_10 (10*0x1000u) |
| #define CSTARTADD_11 (11*0x1000u) |
| #define CSTARTADD_12 (12*0x1000u) |
| #define CSTARTADD_13 (13*0x1000u) |
| #define CSTARTADD_14 (14*0x1000u) |
| #define CSTARTADD_15 (15*0x1000u) |
| |
| /* ADC12MCTLx */ |
| #define INCH0 (0x0001) /* ADC12 Input Channel Select Bit 0 */ |
| #define INCH1 (0x0002) /* ADC12 Input Channel Select Bit 1 */ |
| #define INCH2 (0x0004) /* ADC12 Input Channel Select Bit 2 */ |
| #define INCH3 (0x0008) /* ADC12 Input Channel Select Bit 3 */ |
| #define SREF0 (0x0010) /* ADC12 Select Reference Bit 0 */ |
| #define SREF1 (0x0020) /* ADC12 Select Reference Bit 1 */ |
| #define SREF2 (0x0040) /* ADC12 Select Reference Bit 2 */ |
| #define EOS (0x0080) /* ADC12 End of Sequence */ |
| |
| #define INCH_0 (0) |
| #define INCH_1 (1) |
| #define INCH_2 (2) |
| #define INCH_3 (3) |
| #define INCH_4 (4) |
| #define INCH_5 (5) |
| #define INCH_6 (6) |
| #define INCH_7 (7) |
| #define INCH_8 (8) |
| #define INCH_9 (9) |
| #define INCH_10 (10) |
| #define INCH_11 (11) |
| #define INCH_12 (12) |
| #define INCH_13 (13) |
| #define INCH_14 (14) |
| #define INCH_15 (15) |
| |
| #define SREF_0 (0*0x10u) |
| #define SREF_1 (1*0x10u) |
| #define SREF_2 (2*0x10u) |
| #define SREF_3 (3*0x10u) |
| #define SREF_4 (4*0x10u) |
| #define SREF_5 (5*0x10u) |
| #define SREF_6 (6*0x10u) |
| #define SREF_7 (7*0x10u) |
| |
| /* ADC12IV Definitions */ |
| #define ADC12IV_NONE (0x0000) /* No Interrupt pending */ |
| #define ADC12IV_ADC12OVIFG (0x0002) /* ADC12OVIFG */ |
| #define ADC12IV_ADC12TOVIFG (0x0004) /* ADC12TOVIFG */ |
| #define ADC12IV_ADC12IFG0 (0x0006) /* ADC12IFG0 */ |
| #define ADC12IV_ADC12IFG1 (0x0008) /* ADC12IFG1 */ |
| #define ADC12IV_ADC12IFG2 (0x000A) /* ADC12IFG2 */ |
| #define ADC12IV_ADC12IFG3 (0x000C) /* ADC12IFG3 */ |
| #define ADC12IV_ADC12IFG4 (0x000E) /* ADC12IFG4 */ |
| #define ADC12IV_ADC12IFG5 (0x0010) /* ADC12IFG5 */ |
| #define ADC12IV_ADC12IFG6 (0x0012) /* ADC12IFG6 */ |
| #define ADC12IV_ADC12IFG7 (0x0014) /* ADC12IFG7 */ |
| #define ADC12IV_ADC12IFG8 (0x0016) /* ADC12IFG8 */ |
| #define ADC12IV_ADC12IFG9 (0x0018) /* ADC12IFG9 */ |
| #define ADC12IV_ADC12IFG10 (0x001A) /* ADC12IFG10 */ |
| #define ADC12IV_ADC12IFG11 (0x001C) /* ADC12IFG11 */ |
| #define ADC12IV_ADC12IFG12 (0x001E) /* ADC12IFG12 */ |
| #define ADC12IV_ADC12IFG13 (0x0020) /* ADC12IFG13 */ |
| #define ADC12IV_ADC12IFG14 (0x0022) /* ADC12IFG14 */ |
| #define ADC12IV_ADC12IFG15 (0x0024) /* ADC12IFG15 */ |
| |
| /************************************************************ |
| * Interrupt Vectors (offset from 0xFFE0) |
| ************************************************************/ |
| |
| #define VECTOR_NAME(name) name##_ptr |
| #define EMIT_PRAGMA(x) _Pragma(#x) |
| #define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name |
| #define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section)) |
| #define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \ |
| PLACE_VECTOR(VECTOR_NAME(func), offset) |
| |
| #define PORT2_VECTOR (1 * 1u) /* 0xFFE2 Port 2 */ |
| /*#define PORT2_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Port 2 */ /* CCE V2 Style */ |
| #define USART1TX_VECTOR (2 * 1u) /* 0xFFE4 USART 1 Transmit */ |
| /*#define USART1TX_ISR(func) ISR_VECTOR(func, ".int02") */ /* 0xFFE4 USART 1 Transmit */ /* CCE V2 Style */ |
| #define USART1RX_VECTOR (3 * 1u) /* 0xFFE6 USART 1 Receive */ |
| /*#define USART1RX_ISR(func) ISR_VECTOR(func, ".int03") */ /* 0xFFE6 USART 1 Receive */ /* CCE V2 Style */ |
| #define PORT1_VECTOR (4 * 1u) /* 0xFFE8 Port 1 */ |
| /*#define PORT1_ISR(func) ISR_VECTOR(func, ".int04") */ /* 0xFFE8 Port 1 */ /* CCE V2 Style */ |
| #define TIMERA1_VECTOR (5 * 1u) /* 0xFFEA Timer A CC1-2, TA */ |
| /*#define TIMERA1_ISR(func) ISR_VECTOR(func, ".int05") */ /* 0xFFEA Timer A CC1-2, TA */ /* CCE V2 Style */ |
| #define TIMERA0_VECTOR (6 * 1u) /* 0xFFEC Timer A CC0 */ |
| /*#define TIMERA0_ISR(func) ISR_VECTOR(func, ".int06") */ /* 0xFFEC Timer A CC0 */ /* CCE V2 Style */ |
| #define ADC12_VECTOR (7 * 1u) /* 0xFFEE ADC */ |
| /*#define ADC12_ISR(func) ISR_VECTOR(func, ".int07") */ /* 0xFFEE ADC */ /* CCE V2 Style */ |
| #define USART0TX_VECTOR (8 * 1u) /* 0xFFF0 USART 0 Transmit */ |
| /*#define USART0TX_ISR(func) ISR_VECTOR(func, ".int08") */ /* 0xFFF0 USART 0 Transmit */ /* CCE V2 Style */ |
| #define USART0RX_VECTOR (9 * 1u) /* 0xFFF2 USART 0 Receive */ |
| /*#define USART0RX_ISR(func) ISR_VECTOR(func, ".int09") */ /* 0xFFF2 USART 0 Receive */ /* CCE V2 Style */ |
| #define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer */ |
| /*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */ |
| #define COMPARATORA_VECTOR (11 * 1u) /* 0xFFF6 Comparator A */ |
| /*#define COMPARATORA_ISR(func) ISR_VECTOR(func, ".int11") */ /* 0xFFF6 Comparator A */ /* CCE V2 Style */ |
| #define TIMERB1_VECTOR (12 * 1u) /* 0xFFF8 Timer B CC1-6, TB */ |
| /*#define TIMERB1_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Timer B CC1-6, TB */ /* CCE V2 Style */ |
| #define TIMERB0_VECTOR (13 * 1u) /* 0xFFFA Timer B CC0 */ |
| /*#define TIMERB0_ISR(func) ISR_VECTOR(func, ".int13") */ /* 0xFFFA Timer B CC0 */ /* CCE V2 Style */ |
| #define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable */ |
| /*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */ |
| #define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] */ |
| /*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */ |
| |
| |
| /************************************************************ |
| * End of Modules |
| ************************************************************/ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* extern "C" */ |
| |
| #endif /* #ifndef __msp430x14x */ |
| |