Google Git
Sign in
eclipse / gerrit / titan / titan.ProtocolModules.ISUP_Q.762 / f9f864e56bafc99637b16bc954b58010971e494a / . / src / ISUP_Types.ttcn
blob: cf0d8820402a0bd9a75fa028f6b2ff17d9726c5f [file] [log] [blame]
///////////////////////////////////////////////////////////////////////////////
//
// Copyright (c) 2000-2017 Ericsson Telecom AB
//
// All rights reserved. This program and the accompanying materials
// are made available under the terms of the Eclipse Public License v1.0
// which accompanies this distribution, and is available at
// http://www.eclipse.org/legal/epl-v10.html
///////////////////////////////////////////////////////////////////////////////
//
// File: ISUP_Types.ttcn
// Rev: R8A
// Prodnr: CNL 113 365
// Updated: 2011-05-10
// Contact: http://ttcn.ericsson.se
///////////////////////////////////////////////////////////////////////////////
//
// This product is based on the following documents:
//************************************************************************
// Ericsson Reference for ITU-T : 2/155 17-FAY 112 020/4 Uen, ITU-T ISDN User
// Part, Section A:Formats and Codes
// Standard ITU-T Reference ISUP : Q.763, Signaling System No. 7 - ISDN User
// Part formats and codes
//************************************************************************
// EED/X 1056-174 Uen - Global Call reference for ISUP and BICC, MSC R12
///////////////////////////////////////////////////////////////////////////////
// ! ! ! ! ! ! ! W A R N I N G ! ! ! ! ! ! ! //
// From R2A02 the parameters are in 'set' and not in 'set of'. It has the //
// consequence, that the parameters will be sent out in fix order (as defined//
// in set) so the tester cannot modify the order of the parameters with //
// modification the order in the template. If the order is important, then //
// the previous version of this protocol module should be used. //
///////////////////////////////////////////////////////////////////////////////
//----------------------------------------------------------
//----------------------------------------------------------
//The following modification were done from R1A03 to R2A02:
//----------------------------------------------------------
//----------------------------------------------------------
// New parameter:
//Calling_name_identity
//Global_call_reference
//-------------------------------------------------
// Modified parameter:
//Calling_geodetic_location: Polygon updated
//CCSS_parameter : replaces CCBS_parameter
//Charged_party_identification : converted into record
//Forward_GVNS: TNRN_Spare->BIT1, lengths->INT4b, RAW coding attributes
//Loop_prevention_indicators : field splitted
//Message_compatibility_information: field name updated
//Network_routing_number: incorrect fields
//Network_specific_facility : was not possible to decode
//Optional_backward_call_indicators: field name updated
//Pivot_counter: PivCount->BIT5
//Pivot_routing_backward_information : converted into record
//Pivot_routing_forward_information : converted into record
//Redirect_backward_information : converted into record
//Redirect_forward_information : converted into record
//Redirecting_number : field name updated
//Redirection_information : optional keywords added
//Tariff_indicator : optional keywords added
//User_service_information: redesigned
//User_service_information_prime: redesigned
//User_teleservice_information : optional keywords added
//-------------------------------------------------
// Hexorder modified in parameter:
//Call_transfer_number
//Called_IN_number
//Called_directory_number
//Called_party_number
//Calling_party_number
//Connected_number
//Forward_GVNS
//Generic_number
//HTR_information
//Location_number
//Network_routing_number
//Original_called_number
//Original_called_IN_number
//Redirecting_number
//Redirection_number
//Subsequent_number
//-------------------------------------------------
// Parameter, which should be modified, but due to backward compatibility
// it is not modified:
//Parameter_compatibility_information
//-------------------------------------------------
//"set of" was changed to "set" with the following consequence in parameter:
//-Every optional parameter is extended the id and length.
//-The multiple parameters are put into a set with name <parameter_name>_set
//-The optional parameters of the messages are put into set where every field
// is optional.
//-For mandatory fix long parameters new type is created via removing id and
// length
//-For mandatory variable long parameters new type is created via removing id
//-For parameters which can be also mandatory and optional, the end of name of
// the optional version is extended with an _OPT
module ISUP_Types
{
import from General_Types all;
external function enc_PDU_ISUP(in PDU_ISUP pdu) return octetstring;
external function dec_PDU_ISUP(in octetstring stream) return PDU_ISUP;
external function dec_PDU_ISUP_noCIC(in octetstring stream) return PDU_ISUP;
external function enc_PDU_ISUP_fast(in PDU_ISUP pdu, out octetstring stream)
with { extension "prototype(fast) encode(RAW)" };
external function dec_PDU_ISUP_backtrack(in octetstring stream, out PDU_ISUP pdu) return integer
with { extension "prototype(backtrack) decode(RAW)" };
external function dec_PDU_ISUP_backtrack_noCIC(in octetstring stream, out PDU_ISUP pdu) return integer;
//************************************************************************
// ISUP parameters
//************************************************************************
group ISUP_parameters
{
//************************************************************************
// Circuit Identification Code
// Ericsson Specification Reference: Chapter 2.1.3
// Standard Reference ISUP : Chapter 1.2
//************************************************************************
type record Circuit_identification_code
{
BIT12 CIC, // Circuit identification code
BIT4 Spare // Spare
} with { variant "" };
//************************************************************************
// Message Type
// Ericsson Specification Reference: Chapter 2.1.3
// Standard Reference ISUP : Chapter 1.3
//************************************************************************
type bitstring ISUP_Message_type length(8)
with { variant "FIELDLENGTH(8)" };
//************************************************************************
// Pointer
// Ericsson Specification Reference: Chapter 2.1.7
// Standard Reference ISUP : Chapter 1.9
//************************************************************************
type integer Pointer (0..255)
with { variant "FIELDLENGTH(8)" };
//************************************************************************
// End Of Optional Parameters Indicator
// Ericsson Specification Reference: Chapter 2.3.3.30
// Standard Reference ISUP : Chapter 3.20
//************************************************************************
type octetstring End_of_optional_parameters_indicator length(1)
with { variant "FIELDLENGTH(1)" };
//************************************************************************
// Access Delivery Information
// Ericsson Specification Reference: Chapter 2.3.3.1
// Standard Reference ISUP : Chapter 3.2
//************************************************************************
type record Access_delivery_information // 3.2 / Q.763
{
BIT8 id,
INT1 lengthField,
BIT1 AccessDel, // Access delivery indicator
BIT7 Spare // Spare
} with { variant "PRESENCE( id = '00101110'B)";
variant (lengthField)"LENGTHTO(AccessDel,Spare)";
};
//************************************************************************
// Access Transport
// Ericsson Specification Reference: Chapter 2.3.3.2
// Standard Reference ISUP : Chapter 3.3
//************************************************************************
type record Access_transport
{
BIT8 id,
INT1 lengthField,
OCTN ATP_field
} with { variant "PRESENCE( id = '00000011'B)";
variant (lengthField)"LENGTHTO(ATP_field)";
};
//************************************************************************
// Additional Charging Information
// Ericsson Specification Reference: Chapter 2.3.3.3
//************************************************************************
type record Additional_charging_information
{
BIT8 id,
INT1 lengthField,
BIT8 AddChargeInfo // Additional charging information
} with { variant "PRESENCE( id = '11111010'B)";
variant (lengthField)"LENGTHTO(AddChargeInfo)";
};
//************************************************************************
// Additional Routing Information
// Ericsson Specification Reference: Chapter 2.3.3.4
//************************************************************************
type record Additional_routing_information
{
BIT8 id,
INT1 lengthField,
OCT2 AddRoutInfo // Additional routing information
} with { variant "PRESENCE( id = '11111011'B)";
variant (lengthField)"LENGTHTO(AddRoutInfo)";
};
//************************************************************************
// Application Transport Parameter
// Standard Reference ISUP : Chapter 3.82
//************************************************************************
type record Application_transport_parameter
{
BIT8 id,
INT1 lengthField,
BIT7 applicationContextIdOct1, // Application context identifier
BIT1 extInd1, // Extension indicator
BIT7 applicationContextIdOct1a optional, // Application context identifier
BIT1 extInd1a optional, // Extension indicator
BIT1 releaseCallInd, // Release call indicator
BIT1 sendNotificationInd, // Send notification indicator
BIT5 spare, // Spare
BIT1 extInd2, // Extension indicator
BIT6 aPMSegmentationInd, // APM segmentation indicator
BIT1 sequenceInd, // Sequence indicator
BIT1 extInd3, // Extension indicator
BIT7 segmentationLocalRef optional, // Segmentation local reference
BIT1 extInd3a optional, // Extension indicator
OCTN aPMUserInfo // Encapsulated application information
} with { variant "EXTENSION_BIT_GROUP (yes, applicationContextIdOct1,
extInd1a)";
variant "EXTENSION_BIT_GROUP (yes, aPMSegmentationInd,
extInd3a)";
variant "PRESENCE( id = '01111000'B)";
variant (lengthField)"LENGTHTO(applicationContextIdOct1,extInd1,
applicationContextIdOct1a,extInd1a,
releaseCallInd,sendNotificationInd,
spare,extInd2,aPMSegmentationInd,
sequenceInd,extInd3,
segmentationLocalRef,extInd3a,
aPMUserInfo)";
};
type set of Application_transport_parameter
Application_transport_parameter_set
with { variant "" };
//************************************************************************
// Automatic Congestion Level
// Ericsson Specification Reference: Chapter 2.3.3.5
// Standard Reference ISUP : Chapter 3.4
//************************************************************************
type record Automatic_congestion_level
{
BIT8 id,
INT1 lengthField,
BIT8 CongLevel
} with { variant "PRESENCE( id = '00100111'B)";
variant (lengthField)"LENGTHTO(CongLevel)";
};
//************************************************************************
// Backward Call Indicators
// Ericsson Specification Reference: Chapter 2.3.3.6
// Standard Reference ISUP : Chapter 3.5
//************************************************************************
type record Backward_call_indicators_OPT
{
BIT8 id,
INT1 lengthField,
BIT2 ChargeInd, // Charge indicator
BIT2 CalledPartyStatusInd, // Called party's status indicator
BIT2 CalledPartyCatInd, // Called party's category indicator
BIT2 EndToEndInd, // End-to-end method indicator
BIT1 InterworkingInd, // Interworking indicator
BIT1 EndToEndInfoInd, // End-to-end INFormation indicator
BIT1 ISUPInd, // ISDN User Part indicator
BIT1 HoldingInd, // Holding indicator
BIT1 ISDNAccessInd, // ISDN access indicator
BIT1 EchoControlDevInd, // Echo CONtrol device indicator
BIT2 SCCPMethodInd // SCCP method indicator
} with { variant "PRESENCE( id = '00010001'B)";
variant (lengthField)"LENGTHTO(ChargeInd,CalledPartyStatusInd,
CalledPartyCatInd,EndToEndInd,
InterworkingInd,EndToEndInfoInd,
ISUPInd,HoldingInd,ISDNAccessInd,
EchoControlDevInd,SCCPMethodInd)";
};
type record Backward_call_indicators
{
BIT2 ChargeInd, // Charge indicator
BIT2 CalledPartyStatusInd, // Called party's status indicator
BIT2 CalledPartyCatInd, // Called party's category indicator
BIT2 EndToEndInd, // End-to-end method indicator
BIT1 InterworkingInd, // Interworking indicator
BIT1 EndToEndInfoInd, // End-to-end INFormation indicator
BIT1 ISUPInd, // ISDN User Part indicator
BIT1 HoldingInd, // Holding indicator
BIT1 ISDNAccessInd, // ISDN access indicator
BIT1 EchoControlDevInd, // Echo CONtrol device indicator
BIT2 SCCPMethodInd // SCCP method indicator
} with { variant ""};
//************************************************************************
// Backward GVNS
// Ericsson Specification Reference: Chapter 2.3.3.7
// Standard Reference ISUP : Chapter 3.62
//************************************************************************
type record Backward_GVNS
{
BIT8 id,
INT1 lengthField,
BIT2 TerminatingAccessInd, // Terminating access indicator
BIT5 Spare, // Spare
BIT1 ExtensionInd // Extension indicator
} with { variant "PRESENCE( id = '01001101'B)";
variant (lengthField)"LENGTHTO(TerminatingAccessInd,Spare,
ExtensionInd)";
};
//************************************************************************
// Call Diversion Information
// Ericsson Specification Reference: Chapter 2.3.3.8
// Standard Reference ISUP : Chapter 3.6
//************************************************************************
type record Call_diversion_information
{
BIT8 id,
INT1 lengthField,
BIT3 NotificationSubscriptionOptions, // Notification subscription options
BIT4 RedirectionReason, // Redirecting reason
BIT1 Spare // Spare
} with { variant "PRESENCE( id = '00110110'B)";
variant (lengthField)"LENGTHTO(NotificationSubscriptionOptions,
RedirectionReason,Spare)";
};
//************************************************************************
// Call Diversion Treatment Information
// Ericsson Specification Reference: Chapter 2.3.3.9
// Standard Reference ISUP : Chapter 3.72
//************************************************************************
type record Call_diversion_treatment_indicators
{
BIT8 id,
INT1 lengthField,
BIT2 CallDivertedInd, // Call to be diverted indicator
BIT5 Spare, // Spare
BIT1 ExtensionInd // Extension indicator
} with { variant "PRESENCE( id = '01101110'B)";
variant(lengthField)"LENGTHTO(CallDivertedInd,Spare,ExtensionInd)";
};
//************************************************************************
// Call History Information
// Ericsson Specification Reference: Chapter 2.3.3.10
// Standard Reference ISUP : Chapter 3.7
//************************************************************************
type record Call_history_information
{
BIT8 id,
INT1 lengthField,
OCT2 PropagatDelayValue
} with { variant "PRESENCE( id = '00101101'B)";
variant (lengthField)"LENGTHTO(PropagatDelayValue)";
};
//************************************************************************
// Call Offering Treatment Indicators
// Ericsson Specification Reference: Chapter 2.3.3.11
// Standard Reference ISUP : Chapter 3.74
//************************************************************************
type record Call_offering_treatment_indicators
{
BIT8 id,
INT1 lengthField,
BIT2 CallOfferedInd, // Call to be offered indicator
BIT5 Spare, // Spare
BIT1 ExtensionInd // Extension indicator
} with { variant "PRESENCE( id = '01110000'B)";
variant (lengthField)"LENGTHTO(CallOfferedInd,Spare,ExtensionInd)";
};
//************************************************************************
// Call Reference
// Standard Reference ISUP : Chapter 3.8
//************************************************************************
type record Call_reference
{
BIT8 id,
INT1 lengthField,
OCT5 CRef_contents // Call identity
} with { variant "PRESENCE( id = '00000001'B)";
variant (lengthField)"LENGTHTO(CRef_contents)";
};
//************************************************************************
// Call Transfer Number
// Ericsson Specification Reference: Chapter 2.3.3.12
// Standard Reference ISUP : Chapter 3.64
//************************************************************************
type record Call_transfer_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT2 ScreeningInd, // Screening indicator
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 Spare, // Spare
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '01000101'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
ScreeningInd,AddrPresentRestInd,
NumberingPlanInd,Spare,
AddrSignals,Filler)";
};
//************************************************************************
// Call Transfer Reference
// Ericsson Specification Reference: Chapter 2.3.3.13
// Standard Reference ISUP : Chapter 3.65
//************************************************************************
type record Call_transfer_reference
{
BIT8 id,
INT1 lengthField,
BIT8 CallTransferId // Call transfer identity
} with { variant "PRESENCE( id = '01000011'B)";
variant (lengthField)"LENGTHTO(CallTransferId)";
};
//************************************************************************
// Call Transfer Treatment Indicators
// Ericsson Specification Reference: Chapter 2.3.3.14
//************************************************************************
type record Call_transfer_treatment_indicators
{
BIT8 id,
INT1 lengthField,
BIT2 CallTransferredInd, // Call to be transferred indicator
BIT5 Spare, // Spare
BIT1 ExtensionInd // Extension indicator
} with { variant "PRESENCE( id = '11110011'B)";
variant (lengthField)"LENGTHTO(CallTransferredInd,Spare,
ExtensionInd)";
};
//************************************************************************
// Called IN Number
// Standard Reference ISUP : Chapter 3.73
//************************************************************************
type record Called_IN_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT2 spare_1,
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 spare_2, // Numbering plan indicator
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '01101111'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
spare_1,AddrPresentRestInd,
NumberingPlanInd,spare_2,
AddrSignals,Filler)";
};
//************************************************************************
// Called Directory Number
// Standard Reference ISUP : Chapter 3.86
//************************************************************************
type record Called_directory_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT4 spare, // spare
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 INNInd, // Internal network number indicator
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '01111101'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
spare,NumberingPlanInd,
INNInd,AddrSignals,Filler)";
};
//************************************************************************
// Called Party Number
// Ericsson Specification Reference: Chapter 2.3.3.15
// Standard Reference ISUP : Chapter 3.9
//************************************************************************
type record Called_party_number
{
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT4 Spare, // spare
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 INNInd, // Internal network number indicator
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
Spare,NumberingPlanInd,
INNInd,AddrSignals,Filler)";
};
//************************************************************************
// Calling Geodetic Location
// Standard Reference ISUP : Chapter 3.88
//************************************************************************
type record Ellipsoid_point
{
OCT3 DgrLat, // Degrees of latitude with sign
OCT3 DgrLong // Degrees of longitude
} with { variant "" };
type record Ellipsoid_point_with_uncertainty
{
OCT3 DgrLat, // Degrees of latitude with sign
OCT3 DgrLong, // Degrees of longitude
BIT7 UncCode, // Uncertainty code
BIT1 spare_1, // Spare
BIT7 Conf, // Confidence
BIT1 spare_2 // Spare
} with { variant "" };
type record Point_with_altitude_and_uncertainty
{
OCT3 DgrLat, // Degrees of latitude with sign
OCT3 DgrLong, // Degrees of longitude
BIT7 UncCode_1, // Uncertainty code
BIT1 spare_1, // Spare
OCT2 Alt, // Altitude with sign
BIT7 UncCode_2, // Uncertainty code
BIT1 spare_2, // Spare
BIT7 Conf, // Confidence
BIT1 spare_3 // Spare
} with { variant "" };
type record Ellipse_on_the_ellipsoid
{
OCT3 DgrLat, // Degrees of latitude with sign
OCT3 DgrLong, // Degrees of longitude
BIT7 MajRad, // Major radius
BIT1 spare_1, // Spare
BIT7 MinRad, // Minor radius
BIT1 spare_2, // Spare
OCT1 orient, // Orientation
BIT7 Conf, // Confidence
BIT1 spare_3 // Spare
} with { variant "" };
type record Ellipsoid_circle_sector
{
OCT3 DgrLat, // Degrees of latitude with sign
OCT3 DgrLong, // Degrees of longitude
BIT7 Rad, // Radius
BIT1 spare_1, // Spare
OCT1 Offset, // Offset
OCT1 IncAng, // Included angle
BIT7 Conf, // Confidence
BIT1 spare_2 // Spare
} with { variant "" };
type record Polygon
{
integer NumPoints, // Number of points
BIT4 spare_1, // Spare
DgrLat_longs DgrLat_Longs, // Degrees of latitude / logitude
BIT7 Conf, // Confidence
BIT1 spare_2 // Spare
} with { variant (NumPoints)"LENGTHTO(DgrLat_Longs)";
variant (NumPoints)"UNIT(elements)";
variant (NumPoints) "FIELDLENGTH(4)";
};
type record of DgrLat_long DgrLat_longs// Degrees of latitude / logitude
type record DgrLat_long
{
OCT3 DgrLat, // Degrees of latitude with sign
OCT3 DgrLong // Degrees of longitude
} with { variant "" };
type union Shape_description_union
{
Ellipsoid_point EP,
Ellipsoid_point_with_uncertainty EPU,
Point_with_altitude_and_uncertainty PAU,
Ellipse_on_the_ellipsoid EonE,
Ellipsoid_circle_sector ECS,
Polygon Pol
} with { variant "" };
type record Calling_geodetic_location
{
BIT8 id,
INT1 lengthField,
BIT2 Scr, // Screening
BIT2 LPRI, // Location presentation REStricted indicator
BIT4 Spare, // Spare
BIT7 typeSh, // Type of shape
BIT1 ExtI, // Extension indicator
Shape_description_union ShapeDes
} with { variant (ShapeDes) "CROSSTAG(
EP, typeSh = '0000000'B;
EPU, typeSh = '0000001'B;
PAU, typeSh = '0000010'B;
EonE, typeSh = '0000011'B;
ECS, typeSh = '0000100'B;
Pol, typeSh = '0000101'B
)";
variant "PRESENCE( id = '10000001'B)";
variant (lengthField)"LENGTHTO(Scr,LPRI,Spare,typeSh,ExtI,
ShapeDes)";
};
//************************************************************************
// Calling name identity
// Ericsson Specification Reference: Chapter 2.3.3.16
//************************************************************************
type record Calling_name_identity
{
BIT8 id,
INT1 lengthField,
BIT2 namePresentationRestrictedInd, // Name presentation restricted ind.
BIT2 screeningIndicator, // Screening indicator
BIT1 availabilityInd, // Availability indicator
BIT3 typeOfName, // Type of name
BIT8 encodingInd, // Encoding identification
OCT1_50 characterSubfield // Character
} with { variant "PRESENCE( id = '11110010'B)";
variant (lengthField)"LENGTHTO(namePresentationRestrictedInd,
screeningIndicator,availabilityInd,
typeOfName,encodingInd,
characterSubfield)";
};
//************************************************************************
// Calling Party Number
// Ericsson Specification Reference: Chapter 2.3.3.17
// Standard Reference ISUP : Chapter 3.10
//************************************************************************
type record Calling_party_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT2 ScreeningInd, // Screening indicator
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 NIInd, // Calling party number incomplete indicator
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00001010'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
ScreeningInd,AddrPresentRestInd,
NumberingPlanInd,NIInd,
AddrSignals,Filler)";
};
//************************************************************************
// Calling Party Number
// Ericsson Specification Reference: Chapter 2.3.3.18
// Standard Reference ISUP : Chapter 3.11
//************************************************************************
type record Calling_partys_category_OPT
{
BIT8 id,
INT1 lengthField,
BIT8 CallingPartysCategory // Calling party's category
} with { variant "PRESENCE( id = '00001001'B)";
variant (lengthField)"LENGTHTO(CallingPartysCategory)";
};
type record Calling_partys_category
{
BIT8 CallingPartysCategory // Calling party's category
} with { variant "" };
//************************************************************************
// Cause Indicators
// Ericsson Specification Reference: Chapter 2.3.3.19
// Standard Reference ISUP : Chapter 3.12
//************************************************************************
type record Cause_indicators_OPT
{
BIT8 id,
INT1 lengthField,
BIT4 Location, // Location
BIT1 Spare, // Spare
BIT2 CodingStandard, // Coding standard
BIT1 Ext1, // Extension indicator
BIT7 CauseValue, // Vause value
BIT1 Ext2, // Extension indicator
OCTN Diagnostics optional // Diagnostic(s) (if any)
} with { variant "PRESENCE( id = '00010010'B)";
variant (lengthField)"LENGTHTO(Location,Spare,CodingStandard,
Ext1,CauseValue,
Ext2,Diagnostics)";
};
type record Cause_indicators
{
INT1 lengthField,
BIT4 Location, // Location
BIT1 Spare, // Spare
BIT2 CodingStandard, // Coding standard
BIT1 Ext1, // Extension indicator
BIT7 Reserved optional, // National Recommendation
BIT1 Ext1a optional, // Present when Reserved field is present
BIT7 CauseValue, // Vause value
BIT1 Ext2, // Extension indicator
OCTN Diagnostics optional // Diagnostic(s) (if any)
} with { variant (Reserved) "PRESENCE (Ext1='0'B)";
variant (Ext1a) "PRESENCE (Ext1='0'B)";
variant (lengthField)"LENGTHTO(Location,Spare,CodingStandard,
Ext1,Reserved,Ext1a,CauseValue,
Ext2,Diagnostics)";
};
//************************************************************************
// CCNR Possible Indicator
// Standard Reference ISUP : Chapter 3.83
//************************************************************************
type record CCNR_possible_indicator
{
BIT8 id,
INT1 lengthField,
BIT1 CCNRPInd, // CCNR possible indicator
BIT7 spare // Spare
} with { variant "PRESENCE( id = '01111010'B)";
variant (lengthField)"LENGTHTO(CCNRPInd,spare)";
};
//************************************************************************
// CCSS
// Ericsson Specification Reference: Chapter 2.3.3.20
// Standard Reference ISUP : Chapter 3.63
//************************************************************************
type record CCSS_parameter
{
BIT8 id,
INT1 lengthField,
BIT1 CCSSCallInd, // CCSS call indicator
BIT7 Spare
} with { variant "PRESENCE( id = '01001011'B)";
variant (lengthField)"LENGTHTO(CCSSCallInd,Spare)";
};
//************************************************************************
// Charged Party Identification
// Standard Reference ISUP : Chapter 3.75
//************************************************************************
type record Charged_party_identification
{
BIT8 id,
INT1 lengthField,
OCTN ChargedPartyId
} with { variant "PRESENCE( id = '01110001'B)";
variant (lengthField)"LENGTHTO(ChargedPartyId)";
};
//************************************************************************
// Circuit Assignment Map
// Standard Reference ISUP : Chapter 3.69
//************************************************************************
type record Circuit_assignment_map
{
BIT8 id,
INT1 lengthField,
BIT6 MapType, // Map type
BIT2 spare_1, // Spare
BIT31 MapFormat, // Map format
BIT1 spare_2 // spare
} with { variant "PRESENCE( id = '00100101'B)";
variant (lengthField)"LENGTHTO(MapType,spare_1,MapFormat,spare_2)";
};
//************************************************************************
// Circuit Group Supervision Message Type Indicator
// Ericsson Specification Reference: Chapter 2.3.3.21
// Standard Reference ISUP : Chapter 3.13
//************************************************************************
type record Circuit_group_supervision_message_type_indicator
{
BIT2 Type, // Type indicator
BIT6 Spare // Spare
} with { variant "" };
//************************************************************************
// Circuit State Indicator
// Ericsson Specification Reference: Chapter 2.3.3.22
// Standard Reference ISUP : Chapter 3.14
//************************************************************************
type record Circuit_state_indicator
{
INT1 lengthField,
OCTN CircuitStateIndicator
} with { variant (lengthField)"LENGTHTO(CircuitStateIndicator)";
};
//************************************************************************
// Closed User Group Interlock Code
// Ericsson Specification Reference: Chapter 2.3.3.23
// Standard Reference ISUP : Chapter 3.15
//************************************************************************
// The contents of this parameter are not subdivided because values
//are easy to give as hexnumbers.
type record Closed_user_group_interlock_code
{
BIT8 id,
INT1 lengthField,
OCT4 CUGIC_contents // CUGIC
} with { variant "PRESENCE( id = '00011010'B)";
variant (lengthField)"LENGTHTO(CUGIC_contents)";
};
//************************************************************************
// Collect Call Request
// Standard Reference ISUP : Chapter 3.81
//************************************************************************
type record Collect_call_request
{
BIT8 id,
INT1 lengthField,
BIT1 CCReqInd, // Collect call request indicator
BIT7 spare // Spare
} with { variant "PRESENCE( id = '01111001'B)";
variant (lengthField)"LENGTHTO(CCReqInd,spare)";
};
//************************************************************************
// Conference Treatment Indicators
// Ericsson Specification Reference: Chapter 2.3.3.24
// Standard Reference ISUP : Chapter 3.76
//************************************************************************
type record Conference_treatment_indicators
{
BIT8 id,
INT1 lengthField,
BIT2 ConfAcceptanceInd, // Conference acceptance indicator
BIT5 Spare, // Spare
BIT1 ExtensionInd // Extension indicator
} with { variant "PRESENCE( id = '01110010'B)";
variant (lengthField)"LENGTHTO(ConfAcceptanceInd,Spare,
ExtensionInd)";
};
//************************************************************************
// Connected Number
// Ericsson Specification Reference: Chapter 2.3.3.25
// Standard Reference ISUP : Chapter 3.16
//************************************************************************
type record Connected_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicators
BIT1 OddEven, // Odd/even indicator
BIT2 ScreeningInd, // Screening indicator
BIT2 AddrPresentRestInd, // Address presentation REStriction indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 Spare, // Spare
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00100001'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
ScreeningInd,AddrPresentRestInd,
NumberingPlanInd,Spare,
AddrSignals,Filler)";
};
//************************************************************************
// Connection Request
// Standard Reference ISUP : Chapter 3.17
//************************************************************************
type record Connection_request
{
BIT8 id,
INT1 lengthField,
OCT3 LocRef, // Local reference
OCT2 SPC_contents, // Signalling point code
BIT8 PC, // Protocol class
BIT8 credit // Credit
} with { variant "PRESENCE( id = '00001101'B)";
variant (lengthField)"LENGTHTO(LocRef,SPC_contents,PC,credit)";
};
//************************************************************************
// Continuity Indicators
// Ericsson Specification Reference: Chapter 2.3.3.26
// Standard Reference ISUP : Chapter 3.18
//************************************************************************
type record Continuity_indicators
{
BIT1 ContInd_field, // Continuity indicator
BIT7 Spare // Spare
} with { variant "" };
//************************************************************************
// Correlation Id
// Ericsson Specification Reference: Chapter 2.3.3.27
// Standard Reference ISUP : Chapter 3.70
//************************************************************************
type record Correlation_id
{
BIT8 id,
INT1 lengthField,
OCTN CorrelationId
} with { variant "PRESENCE( id = '01100101'B)";
variant (lengthField)"LENGTHTO(CorrelationId)";
};
//************************************************************************
// Display Information
// Ericsson Specification Reference: Chapter 2.3.3.28
// Standard Reference ISUP : Chapter 3.77
//************************************************************************
type record Display_information
{
BIT8 id,
INT1 lengthField,
OCTN DisplayInfo
} with { variant "PRESENCE( id = '01110011'B)";
variant (lengthField)"LENGTHTO(DisplayInfo)";
};
//************************************************************************
// Distributed Dynamic Routing Indicators
// Ericsson Specification Reference: Chapter 2.3.3.29
//************************************************************************
type record Distributed_dynamic_routing_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 AutoReroutingInd, // Automatic re-routing indicator
BIT1 EventDepRoutingInd, // Event dependent routing indicator
BIT6 Spare // Spare
} with { variant "PRESENCE( id = '11111000'B)";
variant (lengthField)"LENGTHTO(AutoReroutingInd,EventDepRoutingInd,
Spare)";
};
//************************************************************************
// Echo Control Information
// Standard Reference ISUP : Chapter 3.19
//************************************************************************
type record Echo_control_information
{
BIT8 id,
INT1 lengthField,
BIT2 OEchoRsI, // Outgoing echo CONtrol device INFormation indicator
BIT2 IEchoRsI, // Incoming echo CONtrol device INFormation indicator
BIT2 OEchoRqI, // Outgoing echo CONtrol device request indicator
BIT2 IEchoRqI // Incoming echo CONtrol device request indicator
} with { variant "PRESENCE( id = '00110111'B)";
variant (lengthField)"LENGTHTO(OEchoRsI,IEchoRsI,OEchoRqI,
IEchoRqI)";
};
//************************************************************************
// Event Information
// Ericsson Specification Reference: Chapter 2.3.3.31
// Standard Reference ISUP : Chapter 3.21
//************************************************************************
type record Event_information
{
BIT7 EventInd, // Event indicator
BIT1 EventPresentRestrInd // Event presentation retriction indicator
} with { variant ""};
//************************************************************************
// Facility Indicator
// Ericsson Specification Reference: Chapter 2.3.3.32
// Standard Reference ISUP : Chapter 3.22
//************************************************************************
type record Facility_indicator
{
OCT1 FacilityInd // Facility indicator
} with { variant "" };
//************************************************************************
// Forward Call Indicators
// Ericsson Specification Reference: Chapter 2.3.3.33
// Standard Reference ISUP : Chapter 3.23
//************************************************************************
type record Forward_call_indicators
{
BIT1 NatIntCallInd, // National/international call indicator
BIT2 EndToEndMethInd, // End-to-end method indicator
BIT1 InterworkInd, // Interworking indicator
BIT1 EndToEndInfoInd, // End-to-end INFormation indicator
BIT1 ISUPInd, // ISDN User Part indicator
BIT2 ISUPPreferenceInd, // ISDN User Part preference indicator
BIT1 ISDNAccessInd, // ISDN access indicator
BIT2 SCCPMethodInd, // SCCP method indicator
BIT1 Spare, // Spare
BIT2 Reserved, // Reserved
BIT2 VPNCallInd // VPN call indicator (national use)
} with { variant "" };
//************************************************************************
// Forward GVNS
// Ericsson Specification Reference: Chapter 2.3.3.34
// Standard Reference ISUP : Chapter 3.66
//************************************************************************
type record Forward_GVNS
{
BIT8 id,
INT1 lengthField,
INT4b OPSP_Len, // OPSP length indicator
BIT3 OPSP_Spare, // Spare
BIT1 OPSP_OddEven, // Odd/even indicator
HEX1_32 OPSP_AddSign optional, // Digits and Filler if odd digits
HEX1 OPSP_Filler optional,
INT4b GUG_Len, // GUG length indicator
BIT3 GUG_Spare, // Spare
BIT1 GUG_OddEven, // Odd/even indicator
HEX1_32 GUG_AddSign optional, // Digits and Filler if odd digits
HEX1 GUG_Filler optional,
INT4b TNRN_Len, // TNRN length indicator
BIT3 TNRN_NumPlanInd, // Numbering plan indicator
BIT1 TNRN_OddEven, // Odd/even indicator
BIT7 TNRN_NatOfAddInd optional, // Nature of address indicator
BIT1 TNRN_Spare optional, // Spare
HEX1_32 TNRN_AddSign optional, // Digits and Filler if odd digits
HEX1 TNRN_Filler optional
} with { variant (OPSP_Len) "LENGTHTO(OPSP_AddSign,OPSP_Filler)";
variant (GUG_Len) "LENGTHTO(GUG_AddSign,GUG_Filler)";
variant (TNRN_Len) "LENGTHTO(TNRN_NatOfAddInd,TNRN_Spare,
TNRN_AddSign,TNRN_Filler)";
variant (OPSP_AddSign) "HEXORDER(low)";
variant (GUG_AddSign) "HEXORDER(low)";
variant (TNRN_AddSign) "HEXORDER(low)";
variant "PRESENCE( id = '01001100'B)";
variant (lengthField)"LENGTHTO(OPSP_Len,OPSP_Spare,OPSP_OddEven,
OPSP_AddSign,OPSP_Filler,GUG_Len,
GUG_Spare,GUG_OddEven,GUG_AddSign,
GUG_Filler,TNRN_Len,TNRN_NumPlanInd,
TNRN_OddEven,TNRN_NatOfAddInd,
TNRN_Spare,TNRN_AddSign,
TNRN_Filler)";
};
//************************************************************************
// Freephone Indicators
// Ericsson Specification Reference: Chapter 2.3.3.35
//************************************************************************
type record Freephone_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 FreephoneInd, // Freephone indicator
BIT7 Spare // Spare
} with { variant "PRESENCE( id = '01000001'B)";
variant (lengthField)"LENGTHTO(FreephoneInd,Spare)";
};
//************************************************************************
// Generic Digits
// Ericsson Specification Reference: Chapter 2.3.3.36
// Standard Reference ISUP : Chapter 3.24
//************************************************************************
type record Generic_digits
{
BIT8 id,
INT1 lengthField,
BIT5 TypeOfDigits, // Type of digits
BIT3 EncodingScheme, // Encoding scheme
HEX1_32 Digits // Digits
} with { variant "PRESENCE( id = '11000001'B)";
variant (lengthField)"LENGTHTO(TypeOfDigits,EncodingScheme,
Digits)";
};
type set of Generic_digits Generic_digits_set
with { variant "" };
//************************************************************************
// Generic Notification Indicator
// Ericsson Specification Reference: Chapter 2.3.3.37
// Standard Reference ISUP : Chapter 3.25
//************************************************************************
type record Generic_notification_indicator
{
BIT8 id,
INT1 lengthField,
BIT7 NotificationInd, // Notification indicator
BIT1 ExtInd // Extension indicator
} with { variant "PRESENCE( id = '00101100'B)";
variant (lengthField)"LENGTHTO(NotificationInd,ExtInd)";
};
type set of Generic_notification_indicator
Generic_notification_indicator_set
with { variant "" };
//************************************************************************
// Generic Number
// Ericsson Specification Reference: Chapter 2.3.3.38
// Standard Reference ISUP : Chapter 3.26
//************************************************************************
type record Generic_number
{
BIT8 id,
INT1 lengthField,
BIT8 NumQualifier, // Number qualifier indicator
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 Odd_Even, // Odd/even indicator
BIT2 ScreeningInd, // Screening indicator
BIT2 AddrPresentRestInd, // Address presesntation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 NIInd, // Number incomplete indicator
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '11000000'B)";
variant (lengthField)"LENGTHTO(NumQualifier,NatureOfAddrInd,
Odd_Even,ScreeningInd,
AddrPresentRestInd,NumberingPlanInd,
NIInd,AddrSignals,Filler)";
};
type set of Generic_number Generic_number_set
with { variant "" };
//************************************************************************
// HTR Information
// Standard Reference ISUP : Chapter 3.89
//************************************************************************
type record HTR_information
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT4 spare_1, // Spare
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 spare_2, // Spare
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '10000010'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,spare_1,
NumberingPlanInd,spare_2,
AddrSignals,Filler)";
};
//************************************************************************
// Hop Counter
// Ericsson Specification Reference: Chapter 2.3.3.39
// Standard Reference ISUP : Chapter 3.80
//************************************************************************
type record Hop_counter
{
BIT8 id,
INT1 lengthField,
BIT5 HopCount, // Hop counter
BIT3 spare // Spare
} with { variant "PRESENCE( id = '00111101'B)";
variant (lengthField)"LENGTHTO(HopCount,spare)";
};
//************************************************************************
// Information Indicators
// Ericsson Specification Reference: Chapter 2.3.3.40
// Standard Reference ISUP : Chapter 3.28
//************************************************************************
type record Information_indicators
{
BIT2 CallingPartyAddrRespInd, // Calling party address RESponse indicator
BIT1 HoldProvidedInd, // Hold provided indicator
BIT2 Spare1, // Spare
BIT1 CallingPartyCatRespInd, // Calling party's category RESponse ind.
BIT1 Reserved1, // Reserved
BIT1 SolicitedInfoInd, // Solicited INFormation indicator
BIT4 Spare2, // Spare
BIT4 Reserved2 // Reserved 2
} with { variant "" };
//************************************************************************
// Information Request Indicators
// Ericsson Specification Reference: Chapter 2.3.3.41
// Standard Reference ISUP : Chapter 3.29
//************************************************************************
type record Information_request_indicators
{
BIT1 CallingPartyAddrRequestInd,// Calling party address request ind.
BIT1 HoldingInd_or_Spare, // Holding indicator
BIT1 Spare1, // Spare
BIT1 CallingPartyCatRequestInd, // Calling party's category request ind.
BIT1 Reserved1, // Charge INFormation request ind.
BIT2 Spare2, // Spare
BIT1 MCIDReqInd_or_Spare, // Malicious call identification request ind.
BIT4 Spare3, // Spare
BIT4 Reserved2 // Reserved
} with { variant "" };
//************************************************************************
// Location Number
// Ericsson Specification Reference: Chapter 2.3.3.42
// Standard Reference ISUP : Chapter 3.30
//************************************************************************
type record Location_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/Even indicator
BIT2 ScreeningInd, // Screening indicator
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 INNInd, // Internal network number indicator
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00111111'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
ScreeningInd,AddrPresentRestInd,
NumberingPlanInd,INNInd,
AddrSignals,Filler)";
};
//************************************************************************
// Loop Prevention Indicators
// Ericsson Specification Reference: Chapter 2.3.3.43
// Standard Reference ISUP : Chapter 3.67
//************************************************************************
type record Loop_prevention_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 Type, // Type
BIT2 ResponseInd_or_Spare, // Response indicator or Spare
BIT5 Spare
} with { variant "PRESENCE( id = '01000100'B)";
variant (lengthField)"LENGTHTO(Type,ResponseInd_or_Spare,Spare)";
};
//************************************************************************
// MCID Request Indicators
// Ericsson Specification Reference: Chapter 2.3.3.44
// Standard Reference ISUP : Chapter 3.31
//************************************************************************
type record MCID_request_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 MCIDReqInd, // MCID request indicator
BIT1 HoldingInd, // Holding indicator
BIT6 Spare // Spare
} with { variant "PRESENCE( id = '00111011'B)";
variant (lengthField)"LENGTHTO(MCIDReqInd,HoldingInd,Spare)";
};
//************************************************************************
// MCID Response Indicators
// Ericsson Specification Reference: Chapter 2.3.3.45
// Standard Reference ISUP : Chapter 3.32
//************************************************************************
type record MCID_response_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 MCIDRespInd, // MCID RESponse indicator
BIT1 HoldingProvInd, // Hold provided indicator
BIT6 Spare // Spare
} with { variant "PRESENCE( id = '00111100'B)";
variant (lengthField)"LENGTHTO(MCIDRespInd,HoldingProvInd,Spare)";
};
//************************************************************************
// Message Compatibility Information
// Ericsson Specification Reference: Chapter 2.3.3.46
// Standard Reference ISUP : Chapter 3.33
//************************************************************************
type record Message_compatibility_information
{
BIT8 id,
INT1 lengthField,
BIT1 TransitIntermedExchInd, // Transit at intermediate exchange ind.
BIT1 ReleaseCallInd, // Release call indicator
BIT1 SendNotificationInd, // Send notification indicator
BIT1 DiscardMessageInd, // Discard message indicator
BIT1 PassOnNotPossibleInd, // Pass on not possible indicator
BIT2 BroadNarrowbandIwInd, // Broadband/narrowband interworking ind.
BIT1 ExtInd1, // Extension indicator
OCTN Spare2 optional
} with { variant "EXTENSION_BIT_GROUP (yes,TransitIntermedExchInd,Spare2)";
variant "PRESENCE( id = '00111000'B)";
variant (lengthField)"LENGTHTO(TransitIntermedExchInd,
ReleaseCallInd,SendNotificationInd,
DiscardMessageInd,
PassOnNotPossibleInd,
BroadNarrowbandIwInd,
ExtInd1,Spare2)";
};
//************************************************************************
// Meter Pulse Indicator
// Ericsson Specification Reference: Chapter 2.3.3.47
//************************************************************************
type record Meter_pulse_indicator
{
BIT8 id,
INT1 lengthField,
OCT1 MeterPulse, // Meter pulse indicator
OCT1 Reserved // Reserved
} with { variant "PRESENCE( id = '11111110'B)";
variant (lengthField)"LENGTHTO(MeterPulse,Reserved)";
};
//************************************************************************
// MLPP Precedence
// Ericsson Specification Reference: Chapter 2.3.3.48
// Standard Reference ISUP : Chapter 3.34
//************************************************************************
type record MLPP_precedence
{
BIT8 id,
INT1 lengthField,
BIT4 PreLev, // Precedence level
BIT1 spare_1, // Spare
BIT2 LFB, // Look ahead for busy
BIT1 spare_2, // Spare
OCT2 NI, // Network identity
OCT3 ServDom // MLPP service domain
} with { variant "PRESENCE( id = '00111010'B)";
variant (lengthField)"LENGTHTO(PreLev,spare_1,LFB,spare_2,NI,
ServDom)";
};
//************************************************************************
// Nature Of Connection Indicators
// Ericsson Specification Reference: Chapter 2.3.3.49
// Standard Reference ISUP : Chapter 3.35
//************************************************************************
type record Nature_of_connection_indicators
{
BIT2 SatelliteInd, // Satellite indicator
BIT2 ContinuityCheckInd, // Continuity check indicator
BIT1 EchoControlDevInd, // Echo CONtrol device indicator
BIT3 Spare // Spare
} with { variant "" };
//************************************************************************
// Network Call Reference
// Ericsson Specification Reference: Chapter 2.3.3.50
//************************************************************************
type record Network_call_reference
{
BIT8 id,
INT1 lengthField,
OCT3 CallIdentity, // Call identity
BIT14 SwitchId, // Switch identity
BIT2 Spare // Spare
} with { variant "PRESENCE( id = '11110100'B)";
variant (lengthField)"LENGTHTO(CallIdentity,SwitchId,Spare)";
};
//************************************************************************
// Network Management Controls
// Standard Reference ISUP : Chapter 3.68
//************************************************************************
type record Network_management_controls
{
BIT8 id,
INT1 lengthField,
BIT1 TAR_indicator, // Temporary alternate routing indicator
BIT6 spare, // Temporary alternate routing indicator
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '01011011'B)";
variant (lengthField)"LENGTHTO(TAR_indicator,spare,ExtI)";
};
//************************************************************************
// Network Routing Number
// Standard Reference ISUP : Chapter 3.90
//************************************************************************
type record Network_routing_number
{
BIT8 id,
INT1 lengthField,
BIT4 NatureOfAddrInd, // Nature of address indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 OddEven, // Odd/even indicator
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '10000100'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,NumberingPlanInd,
OddEven,AddrSignals,Filler)";
};
//************************************************************************
// Network Specific Facility
// Ericsson Specification Reference: Chapter 2.3.3.51
// Standard Reference ISUP : Chapter 3.36
//************************************************************************
type record Network_specific_facility
{
BIT8 id,
INT1 lengthField,
INT1 LenOfNetwId, // Length of network identification
BIT4 NetworkIdPlan optional, // Network identification plan
BIT3 TypeofNetworkId optional, // Type of network identification
BIT1 One optional,
OCTN NetworkId optional, // Network id. First bit in octets is 0
OCTN NetworkSpecificFacility // network-specific FACility indicator
} with { variant (LenOfNetwId) "LENGTHTO(NetworkIdPlan,TypeofNetworkId,
One,NetworkId)";
variant "PRESENCE( id = '00101111'B)";
variant (lengthField)"LENGTHTO(LenOfNetwId,NetworkIdPlan,
TypeofNetworkId,One,NetworkId,
NetworkSpecificFacility)";
};
//************************************************************************
// Number Portability Forward Information
// Standard Reference ISUP : Chapter 3.101
//************************************************************************
type record Number_portability_forward_information
{
BIT8 id,
INT1 lengthField,
BIT4 NbPStInd, // Number portability status indicator
BIT3 spare, // Spare
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '10001101'B)";
variant (lengthField)"LENGTHTO(NbPStInd,spare,ExtI)";
};
//************************************************************************
// Optional Backward Call Indicators
// Ericsson Specification Reference: Chapter 2.3.3.52
// Standard Reference ISUP : Chapter 3.37
//************************************************************************
type record Optional_backward_call_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 InBandInfoInd, // In-band INFormation indicator
BIT1 CallDiversionMayOccurInd, // Call diversion may occur indicator
BIT1 SimpleSegmentationInd, // Simple segmentation indicator
BIT1 MLPPUserInd, // MLPP User Indicator
BIT2 Reserved, // Reserved
BIT1 TimeSupervBeforeAnsInd, // Time supervision before answerind.
BIT1 LastPartyRelInd // Last party release indicator
} with { variant "PRESENCE( id = '00101001'B)";
variant (lengthField)"LENGTHTO(InBandInfoInd,
CallDiversionMayOccurInd,
SimpleSegmentationInd,MLPPUserInd,
Reserved,TimeSupervBeforeAnsInd,
LastPartyRelInd)";
};
//************************************************************************
// Optional Forward Call Indicators
// Ericsson Specification Reference: Chapter 2.3.3.53
// Standard Reference ISUP : Chapter 3.38
//************************************************************************
type record Optional_forward_call_indicators
{
BIT8 id,
INT1 lengthField,
BIT2 CUGCallInd, // Closed user group call indicator
BIT1 SimpleSegmentationInd, // Simple segmentation indicator
BIT4 Spare, // Spare
BIT1 ConnLineReqInd // Connected line identity request indicator
} with { variant "PRESENCE( id = '00001000'B)";
variant (lengthField)"LENGTHTO(CUGCallInd,SimpleSegmentationInd,
Spare,ConnLineReqInd)";
};
//************************************************************************
// Original Called Number
// Ericsson Specification Reference: Chapter 2.3.3.54
// Standard Reference ISUP : Chapter 3.39
//************************************************************************
type record Original_called_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT2 Spare_1, // Spare
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 Spare_2, // Spare
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00101000'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,Spare_1,
AddrPresentRestInd,NumberingPlanInd,
Spare_2,AddrSignals,Filler)";
};
//************************************************************************
// Original Called IN Number
// Standard Reference ISUP : Chapter 3.87
//************************************************************************
type record Original_called_IN_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT2 spare_1, // Spare
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 spare_2, // Spare
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '01111111'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,spare_1,
AddrPresentRestInd,NumberingPlanInd,
spare_2,AddrSignals,Filler)";
};
//************************************************************************
// Origination ISC Point Code
// Ericsson Specification Reference: Chapter 2.3.3.55
// Standard Reference ISUP : Chapter 3.40
//************************************************************************
type record Origination_ISC_point_code
{
BIT8 id,
INT1 lengthField,
OCT2 OriISC_contents // Signalling point code
} with { variant "PRESENCE( id = '00101011'B)";
variant (lengthField)"LENGTHTO(OriISC_contents)";
};
//************************************************************************
// Parameter Compatibility Information
// Ericsson Specification Reference: Chapter 2.3.3.56
// Standard Reference ISUP : Chapter 3.41
//************************************************************************
type record Parameter_compatibility_information
{
BIT8 id,
INT1 lengthField,
BIT8 FirstUpgradParam, // Upgraded parameter name
BIT7 InstructIndFirst, // all instruction indicators for parameter 1
BIT1 ExtInd1, // Extension indicator
BIT8 SecondUpgradParam optional,
BIT7 InstructIndSecond optional, // all instruction indicators for param. 2
BIT1 ExtInd2 optional, // Extension indicator
BIT8 ThirdUpgradParam optional,
BIT7 InstructIndThird optional, // all instruction indicators for param. 3
BIT1 ExtInd3 optional, // Extension indicator
BIT8 FourthUpgradParam optional,
BIT7 InstructIndFourth optional, // all instruction indicators for param. 4
BIT1 ExtInd4 optional, // Extension indicator
BIT8 FifthUpgradParam optional,
BIT7 InstructIndFifth optional, // all instruction indicators for param. 5
BIT1 ExtInd5 optional// Extension indicator
} with { variant "PRESENCE( id = '00111001'B)";
variant (lengthField)"LENGTHTO(FirstUpgradParam,InstructIndFirst,
ExtInd1,SecondUpgradParam,
InstructIndSecond,ExtInd2,
ThirdUpgradParam,InstructIndThird,
ExtInd3,FourthUpgradParam,
InstructIndFourth,ExtInd4,
FifthUpgradParam,InstructIndFifth,
ExtInd5)";
};
//************************************************************************
// Pivot Capability
// Standard Reference ISUP : Chapter 3.84
//************************************************************************
type record Pivot_capability
{
BIT8 id,
INT1 lengthField,
BIT3 PivPosInd, // Pivot possible indicator
BIT3 spare, // Spare
BIT1 IwRedirInd, // Interworking to redirection indicator
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '01111011'B)";
variant (lengthField)"LENGTHTO(PivPosInd,spare,IwRedirInd,ExtI)";
};
//************************************************************************
// Pivot Counter
// Standard Reference ISUP : Chapter 3.93
//************************************************************************
type record Pivot_counter
{
BIT8 id,
INT1 lengthField,
BIT5 PivCount, // Pivot counter
BIT3 spare // spare
} with { variant "PRESENCE( id = '10000111'B)";
variant (lengthField)"LENGTHTO(PivCount,spare)";
};
//************************************************************************
// Pivot Routing Backward Information
// Standard Reference ISUP : Chapter 3.95
//************************************************************************
type record Pivot_routing_backward_information
{
BIT8 id,
INT1 lengthField,
ISUP_Information_type_set PivotInfo
} with { variant "PRESENCE( id = '10001001'B)";
variant (lengthField)"LENGTHTO(PivotInfo)";
};
type record ISUP_Information_type
{
BIT8 infoTypeTag,
INT1 infoTypeLength,
OCTN infoTypeValue
} with { variant (infoTypeLength)"LENGTHTO(infoTypeValue)";
};
type set of ISUP_Information_type ISUP_Information_type_set
with { variant "" };
//************************************************************************
// Pivot Routing Forward Information
// Standard Reference ISUP : Chapter 3.94
//************************************************************************
type record Pivot_routing_forward_information
{
BIT8 id,
INT1 lengthField,
ISUP_Information_type_set PivotInfo
} with { variant "PRESENCE( id = '10001000'B)";
variant (lengthField)"LENGTHTO(PivotInfo)";
};
//************************************************************************
// Pivot Routing Indicators
// Standard Reference ISUP : Chapter 3.85
//************************************************************************
type record Pivot_routing_indicators
{
BIT8 id,
INT1 lengthField,
BIT7 PivRoutInd, // Pivot routing indicators
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '01111100'B)";
variant (lengthField)"LENGTHTO(PivRoutInd,ExtI)";
};
//************************************************************************
// Pivot Status
// Standard Reference ISUP : Chapter 3.92
//************************************************************************
type record Pivot_status
{
BIT8 id,
INT1 lengthField,
BIT2 PivStInd, // Pivot status indicator
BIT5 spare, // Spare
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '10000110'B)";
variant (lengthField)"LENGTHTO(PivStInd,spare,ExtI)";
};
//************************************************************************
// Propagation Delay Counter
// Ericsson Specification Reference: Chapter 2.3.3.57
// Standard Reference ISUP : Chapter 3.42
//************************************************************************
type record Propagation_delay_counter
{
BIT8 id,
INT1 lengthField,
OCT2 PropagationDelayValue
} with { variant "PRESENCE( id = '00110001'B)";
variant (lengthField)"LENGTHTO(PropagationDelayValue)";
};
//************************************************************************
// Query On Release Capability
// Standard Reference ISUP : Chapter 3.91
//************************************************************************
type record Query_on_release_capability
{
BIT8 id,
INT1 lengthField,
BIT1 QoRCapInd, // Query on RELease capability indicator
BIT6 spare, // Spare
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '10000101'B)";
variant (lengthField)"LENGTHTO(QoRCapInd,spare,ExtI)";
};
//************************************************************************
// Range And Status
// Ericsson Specification Reference: Chapter 2.3.3.58
// Standard Reference ISUP : Chapter 3.43
//************************************************************************
type record Range_and_status
{
INT1 lengthField,
OCT1 Range, // Range
OCTN Status optional// Status
} with { variant (lengthField)"LENGTHTO(Range,Status)";
};
//************************************************************************
// Redirect Backward Information
// Standard Reference ISUP : Chapter 3.100
//************************************************************************
type record Redirect_backward_information
{
BIT8 id,
INT1 lengthField,
ISUP_Information_type_set RedirInfo
} with { variant "PRESENCE( id = '10001100'B)";
variant (lengthField)"LENGTHTO(RedirInfo)";
};
//************************************************************************
// Redirect Capability
// Standard Reference ISUP : Chapter 3.96
//************************************************************************
type record Redirect_capability
{
BIT8 id,
INT1 lengthField,
BIT3 RedirPosInd, // Redirect possible indicator
BIT4 spare, // Spare
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '01001110'B)";
variant (lengthField)"LENGTHTO(RedirPosInd,spare,ExtI)";
};
//************************************************************************
// Redirect Counter
// Standard Reference ISUP : Chapter 3.97
//************************************************************************
type record Redirect_counter
{
BIT8 id,
INT1 lengthField,
BIT5 RedirCount, // Redirect counter
BIT3 spare // Spare
} with { variant "PRESENCE( id = '01110111'B)";
variant (lengthField)"LENGTHTO(RedirCount,spare)";
};
//************************************************************************
// Redirect Forward Information
// Standard Reference ISUP : Chapter 3.99
//************************************************************************
type record Redirect_forward_information
{
BIT8 id,
INT1 lengthField,
ISUP_Information_type_set RedirInfo
} with { variant "PRESENCE( id = '10001011'B)";
variant (lengthField)"LENGTHTO(RedirInfo)";
};
//************************************************************************
// Redirect Status
// Standard Reference ISUP : Chapter 3.98
//************************************************************************
type record Redirect_status
{
BIT8 id,
INT1 lengthField,
BIT2 RedirStInd, // Redirect status indicator
BIT5 spare, // Spare
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '10001010'B)";
variant (lengthField)"LENGTHTO(RedirStInd,spare,ExtI)";
};
//************************************************************************
// Redirecting Number
// Ericsson Specification Reference: Chapter 2.3.3.59
// Standard Reference ISUP : Chapter 3.44
//************************************************************************
type record Redirecting_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT2 Spare1, // Spare
BIT2 AddrPresentRestInd, // Address presentation REStricted indicator
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 Spare, // Spare
HEX1_32 AddrSignals optional, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00001011'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,
Spare1,AddrPresentRestInd,
NumberingPlanInd,Spare,AddrSignals,
Filler)";
};
//************************************************************************
// Redirection Information
// Ericsson Specification Reference: Chapter 2.3.3.60
// Standard Reference ISUP : Chapter 3.45
//************************************************************************
type record Redirection_information
{
BIT8 id,
INT1 lengthField,
BIT3 RedirectionInd, // Redirecting indicator
BIT1 Spare1, // Redirecting indicator
BIT4 OriginalRedirectionReason, // Original redirection reason
BIT3 RedirectionCounter optional, // Redirection counter
BIT1 Spare2 optional, // Spare
BIT4 RedirectingReason optional // Redirecting reason
} with { variant "PRESENCE( id = '00010011'B)";
variant (lengthField)"LENGTHTO(RedirectionInd,Spare1,
OriginalRedirectionReason,
RedirectionCounter,Spare2,
RedirectingReason)";
};
//************************************************************************
// Redirection Number
// Ericsson Specification Reference: Chapter 2.3.3.61
// Standard Reference ISUP : Chapter 3.46
//************************************************************************
type record Redirection_number
{
BIT8 id,
INT1 lengthField,
BIT7 NatureOfAddrInd, // Nature of address indicator
BIT1 OddEven, // Odd/even indicator
BIT4 Spare, // spare
BIT3 NumberingPlanInd, // Numbering plan indicator
BIT1 INNInd, // Internal network number indicator
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00001100'B)";
variant (lengthField)"LENGTHTO(NatureOfAddrInd,OddEven,Spare,
NumberingPlanInd,INNInd,
AddrSignals,Filler)";
};
//************************************************************************
// Redirection Number Restriction
// Ericsson Specification Reference: Chapter 2.3.3.62
// Standard Reference ISUP : Chapter 3.47
//************************************************************************
type record Redirection_number_restriction
{
BIT8 id,
INT1 lengthField,
BIT2 PresRestInd, // Presentation REStricted indicator
BIT6 Spare // Spare
} with { variant "PRESENCE( id = '01000000'B)";
variant (lengthField)"LENGTHTO(PresRestInd,Spare)";
};
//************************************************************************
// Remote Operations
// Standard Reference ISUP : Chapter 3.48
//************************************************************************
type record Remote_operations
{
BIT8 id,
INT1 lengthField,
BIT5 ProtProf, // Protocol profile
BIT2 spare, // Spare
BIT1 ExtI, // Extension indicator
OCTN Comp // Components
} with { variant "PRESENCE( id = '00110010'B)";
variant (lengthField)"LENGTHTO(ProtProf,spare,ExtI,Comp)";
};
//************************************************************************
// Route Identity
// Ericsson Specification Reference: Chapter 2.3.3.63
//************************************************************************
type record Route_identity
{
BIT8 id,
INT1 lengthField,
OCT2 RouteIdentity
} with { variant "PRESENCE( id = '11111100'B)";
variant (lengthField)"LENGTHTO(RouteIdentity)";
};
//************************************************************************
// SCF Id
// Ericsson Specification Reference: Chapter 2.3.3.64
// Standard Reference ISUP : Chapter 3.71
//************************************************************************
type record SCF_id
{
BIT8 id,
INT1 lengthField,
OCTN SCFId
} with { variant "PRESENCE( id = '01100110'B)";
variant (lengthField)"LENGTHTO(SCFId)";
};
//************************************************************************
// Service Activation
// Ericsson Specification Reference: Chapter 2.3.3.65
// Standard Reference ISUP : Chapter 3.49
//************************************************************************
type record Service_activation
{
BIT8 id,
INT1 lengthField,
OCTN ServAct_contents
} with { variant "PRESENCE( id = '00110011'B)";
variant (lengthField)"LENGTHTO(ServAct_contents)";
};
//************************************************************************
// Signalling Point Code
// Standard Reference ISUP : Chapter 3.50
//************************************************************************
type record Signalling_point_code
{
BIT8 id,
INT1 lengthField,
OCT2 SPC_contents // Signalling point code
} with { variant "PRESENCE( id = '00011110'B)";
variant (lengthField)"LENGTHTO(SPC_contents)";
};
//************************************************************************
// Subsequent Number
// Ericsson Specification Reference: Chapter 2.3.3.66
// Standard Reference ISUP : Chapter 3.51
//************************************************************************
type record Subsequent_number_OPT
{
BIT8 id,
INT1 lengthField,
BIT7 Spare, // Spare
BIT1 OddEven, // Odd/even inicator
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant "PRESENCE( id = '00000101'B)";
variant (lengthField)"LENGTHTO(Spare,OddEven,AddrSignals,Filler)";
};
type record Subsequent_number
{
INT1 lengthField,
BIT7 Spare, // Spare
BIT1 OddEven, // Odd/even inicator
HEX1_32 AddrSignals, // Address signals and Filler if odd addr.signals
HEX1 Filler optional
} with { variant (AddrSignals) "HEXORDER(low)";
variant (lengthField)"LENGTHTO(Spare,OddEven,AddrSignals,Filler)";
};
//************************************************************************
// Suspend Resume Indicators
// Ericsson Specification Reference: Chapter 2.3.3.67
// Standard Reference ISUP : Chapter 3.52
//************************************************************************
type record Suspend_resume_indicators
{
BIT1 SUSRESInd, // Suspend/resume indicator
BIT7 Spare // Spare
} with { variant "" };
//************************************************************************
// Tariff Indicator
// Ericsson Specification Reference: Chapter 2.3.3.68
//************************************************************************
type record Tariff_indicator
{
BIT8 id,
INT1 lengthField,
OCT1 TariffInd, // Tariff indicator
OCT1 Reserved optional// Reserved
} with { variant "PRESENCE( id = '11111101'B)";
variant (lengthField)"LENGTHTO(TariffInd,Reserved)";
};
//************************************************************************
// Transit Network Selection
// Ericsson Specification Reference: Chapter 2.3.3.69
// Standard Reference ISUP : Chapter 3.53
//************************************************************************
type record Transit_network_selection
{
BIT8 id,
INT1 lengthField,
BIT4 NetIdPlan, // Network identification plan
BIT3 TypeOfNetId, // Type of network identification
BIT1 OddEvenInd, // Odd/even inicator
OCTN NetId // Network identification
} with { variant "PRESENCE( id = '00100011'B)";
variant (lengthField)"LENGTHTO(NetIdPlan,TypeOfNetId,OddEvenInd,
NetId)";
};
//************************************************************************
// Transmission Medium Requirement
// Ericsson Specification Reference: Chapter 2.3.3.70
// Standard Reference ISUP : Chapter 3.54
//************************************************************************
type record Transmission_medium_requirement
{
BIT8 TMR
} with { variant "" };
//************************************************************************
// Transmission Medium Requirement Prime
// Ericsson Specification Reference: Chapter 2.3.3.71
// Standard Reference ISUP : Chapter 3.55
//************************************************************************
type record Transmission_medium_requirement_prime
{
BIT8 id,
INT1 lengthField,
BIT8 TMRp_field
} with { variant "PRESENCE( id = '00111110'B)";
variant (lengthField)"LENGTHTO(TMRp_field)";
};
//************************************************************************
// Transmission Medium Used
// Ericsson Specification Reference: Chapter 2.3.3.72
// Standard Reference ISUP : Chapter 3.56
//************************************************************************
type record Transmission_medium_used
{
BIT8 id,
INT1 lengthField,
BIT8 TMU_field
} with { variant "PRESENCE( id = '00110101'B)";
variant (lengthField)"LENGTHTO(TMU_field)";
};
//************************************************************************
// UID Action Indicators
// Standard Reference ISUP : Chapter 3.78
//************************************************************************
type record UID_action_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 ThConInsInd, // Through CONnection instruction indicator
BIT1 T9InsInd, // T9 timer instruction indicator
BIT5 spare, // Spare
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '01110100'B)";
variant (lengthField)"LENGTHTO(ThConInsInd,T9InsInd,spare,ExtI)";
};
//************************************************************************
// UID Capability Indicators
// Standard Reference ISUP : Chapter 3.79
//************************************************************************
type record UID_capability_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 through_connection_indicator, // Through CONnection indicator
BIT1 T9_timer_indicator, // T9 timer indicator
BIT5 spare, // T9 timer indicator
BIT1 ExtI // Extension indicator
} with { variant "PRESENCE( id = '01110101'B)";
variant (lengthField)"LENGTHTO(through_connection_indicator,
T9_timer_indicator,spare,ExtI)";
};
//************************************************************************
// User Service Information
// Ericsson Specification Reference: Chapter 2.3.3.73
// Standard Reference ISUP : Chapter 3.57
//************************************************************************
type record User_service_information
{
BIT8 id,
INT1 lengthField,
BIT5 InfTrC, // Information transfer capability
BIT2 CodS, // Coding standard
BIT1 ExtI_1, // Extension indicator (1)
//EXT GR1 start
BIT5 infTR, // Information transfer rate
BIT2 TrMod, // Transfer mode
BIT1 ExtI_2, // Extension indicator (0/1)
BIT2 establishment optional, // demand
BIT2 configuration optional, // point-to-point
BIT3 structure optional, // default
BIT1 ext2a optional,
BIT5 infoTransRate optional, //used for packet-mode calls
BIT2 symmetry optional, // bi-directional symmetric
BIT1 ext2b optional,
//EXT GR1 end
BIT7 RatMul optional, // Rate multiplier
BIT1 ExtI_2_1 optional, // Extension indicator (1)
Layer1_info layer1 optional,
Layer2_info layer2 optional,
Layer3_info layer3 optional
} with { variant "EXTENSION_BIT_GROUP(yes,infTR,ext2b)";
variant (RatMul) "PRESENCE(infTR = '11000'B)";
variant (ExtI_2_1) "PRESENCE(infTR = '11000'B)";
variant "TAG ( layer1, layer_id = '01'B;
layer2, layer_id = '10'B;
layer3, layer_id = '11'B;)"
variant "PRESENCE( id = '00011101'B)";
variant (lengthField)"LENGTHTO(InfTrC,CodS,ExtI_1,infTR,TrMod,
ExtI_2,establishment,configuration,
structure,ext2a,infoTransRate,
symmetry,ext2b,RatMul,ExtI_2_1,
layer1,layer2,layer3)";
};
type record Layer1_info
{
BIT5 UInf1, // User INFormation layer 1 protocol
BIT2 layer_id, // Layer identification
BIT1 ExtI_3, // Extension indicator (0/1)
BIT5 UsrRate optional, // User rate
BIT1 Negot optional, // Negotiation
BIT1 SynAsyn optional, // Synchronous/Asynchronous
BIT1 ExtI_3a optional, // Extension indicator (0/1)
//Note: the content of this field depends on field UInf1 - see Q.931 4.5.5
BIT7 Bits_3b optional, // info bits in octet 3b
BIT1 ExtI_3b optional, // Extension indicator (0/1)
//BIT1 Spare_1 optional, // Spare
//BIT1 FlCtrRx optional, // Flow control on Rx
//BIT1 FlCtrTx optional, // Flow control on Tx
//BIT1 NICRx optional, // Network independent clock on RX
//BIT1 NICTx optional, // Network independent clock on TX
//BIT2 IntRate optional, // Intermediate rate
//BIT1 ExtI_6 optional, // Extension indicator (0/1)
//BIT1 Spare_2 optional, // Spare
//BIT1 InBndNeg optional, // In-band/out-band negotiation
//BIT1 Ass optional, // Assignor/assignee
//BIT1 LLINeg optional, // Logical link identifier negotiation
//BIT1 Mode optional, // Mode of operation
//BIT1 MultFr optional,// Multiple frame establishment support in data link
//BIT1 Hdr optional, // Rate adaption header/no header
//BIT1 ExtI_7 optional,// Extension indicator (0/1)
BIT3 Prty optional, // Parity INFormation
BIT2 NDatBit optional, // Number of data bits excluding parity bit if pres.
BIT2 NStpBit optional, // Number of stop bits
BIT1 ExtI_3c optional, // Extension indicator (0/1)
BIT6 MdmTyp optional, // Modem type
BIT1 DupMod optional, // Mode duplex
BIT1 ExtI_3d optional // Extension indicator (1)
} with { variant "EXTENSION_BIT(yes)"}
type record Layer2_info
{
BIT5 uInf2, // User information layer 2 protocol
BIT2 layer_id, // Layer identification
BIT1 extI_10 // Extension indicator (1)
} with { variant "" };
type record Layer3_info
{
BIT5 uInf3, // User information layer 3 protocol
BIT2 layer_id, // Layer identification
BIT1 extI_11 // Extension indicator (1)
} with { variant "" };
//************************************************************************
// User Service Information Prime
// Ericsson Specification Reference: Chapter 2.3.3.74
// Standard Reference ISUP : Chapter 3.58
//************************************************************************
type record User_service_information_prime
{
BIT8 id,
INT1 lengthField,
BIT5 InfTrC, // Information transfer capability
BIT2 CodS, // Coding standard
BIT1 ExtI_1, // Extension indicator (1)
//EXT GR1 start
BIT5 infTR, // Information transfer rate
BIT2 TrMod, // Transfer mode
BIT1 ExtI_2, // Extension indicator (0/1)
BIT2 establishment optional, // demand
BIT2 configuration optional, // point-to-point
BIT3 structure optional, // default
BIT1 ext2a optional,
BIT5 infoTransRate optional, //used for packet-mode calls
BIT2 symmetry optional, // bi-directional symmetric
BIT1 ext2b optional,
//EXT GR1 end
BIT7 RatMul optional, // Rate multiplier
BIT1 ExtI_2_1 optional, // Extension indicator (1)
Layer1_info layer1 optional,
Layer2_info layer2 optional,
Layer3_info layer3 optional
} with { variant "EXTENSION_BIT_GROUP(yes,infTR,ext2b)";
variant (RatMul) "PRESENCE(infTR = '11000'B)";
variant (ExtI_2_1) "PRESENCE(infTR = '11000'B)";
variant "TAG ( layer1, layer_id = '01'B;
layer2, layer_id = '10'B;
layer3, layer_id = '11'B;)"
variant "PRESENCE( id = '00110000'B)";
variant (lengthField)"LENGTHTO(InfTrC,CodS,ExtI_1,infTR,TrMod,
ExtI_2,establishment,configuration,
structure,ext2a,infoTransRate,
symmetry,ext2b,RatMul,ExtI_2_1,
layer1,layer2,layer3)";
};
/* The old version is commented out because it could cause decoding problems.
type record User_service_information // 3.57 / Q.763
{
BIT5 InfTrC, // Information transfer capability
BIT2 CodS, // Coding standard
BIT1 ExtI_1, // Extension indicator (1)
BIT5 InfTR, // Information transfer rate
BIT2 TrMod, // Transfer mode
BIT1 ExtI_2, // Extension indicator (0/1)
BIT8 RatMul optional, // Rate multiplier
BIT1 ExtI_3 optional, // Extension indicator (1)
BIT5 UInf1 optional, // User INFormation layer 1 protocol
BIT2 Lay1 optional, // Layer identification
BIT1 ExtI_4 optional, // Extension indicator (0/1)
BIT5 UsrRate optional, // User rate
BIT1 Negot optional, // Negotiation
BIT1 SynAsyn optional, // Synchronous/Asynchronous
BIT1 ExtI_5 optional, // Extension indicator (0/1)
BIT1 Spare_1 optional, // Spare
BIT1 FlCtrRx optional, // Flow control on Rx
BIT1 FlCtrTx optional, // Flow control on Tx
BIT1 NICRx optional, // Network independent clock on RX
BIT1 NICTx optional, // Network independent clock on TX
BIT2 IntRate optional, // Intermediate rate
BIT1 ExtI_6 optional, // Extension indicator (0/1)
BIT1 Spare_2 optional, // Spare
BIT1 InBndNeg optional, // In-band/out-band negotiation
BIT1 Ass optional, // Assignor/assignee
BIT1 LLINeg optional, // Logical link identifier negotiation
BIT1 Mode optional, // Mode of operation
BIT1 MultFr optional, // Multiple frame establishment support in data link
BIT1 Hdr optional, // Rate adaption header/no header
BIT1 ExtI_7 optional, // Extension indicator (0/1)
BIT3 Prty optional, // Parity INFormation
BIT2 NDatBit optional, // Number of data bits excluding parity bit if pres.
BIT2 NStpBit optional, // Number of stop bits
BIT1 ExtI_8 optional, // Extension indicator (1)
BIT6 MdmTyp optional, // Modem type
BIT1 DupMod optional, // Mode duplex
BIT1 ExtI_9 optional, // Extension indicator (1)
BIT5 UInf2 optional, // User INFormation layer 2 protocol
BIT2 Lay2 optional, // Layer identification
BIT1 ExtI_10 optional, // Extension indicator (1)
BIT5 UInf3 optional, // User INFormation layer 3 protocol
BIT2 Lay3 optional, // Layer identification
BIT1 ExtI_11 optional // Extension indicator (1)
} with { variant "" };
type record User_service_information_prime // 3.58 / Q.763
{
BIT5 InfTrC, // Information transfer capability
BIT2 CodS, // Coding standard
BIT1 ExtI_1, // Extension indicator (1)
BIT5 InfTR, // Information transfer rate
BIT2 TrMod, // Transfer mode
BIT1 ExtI_2, // Extension indicator (0/1)
BIT8 RatMul optional, // Rate multiplier
BIT1 ExtI_3 optional, // Extension indicator (1)
BIT5 UInf1 optional, // User INFormation layer 1 protocol
BIT2 Lay1 optional, // Layer identification
BIT1 ExtI_4 optional, // Extension indicator (0/1)
BIT5 UsrRate optional, // User rate
BIT1 Negot optional, // Negotiation
BIT1 SynAsyn optional, // Synchronous/Asynchronous
BIT1 ExtI_5 optional, // Extension indicator (0/1)
BIT1 Spare_1 optional, // Spare
BIT1 FlCtrRx optional, // Flow control on Rx
BIT1 FlCtrTx optional, // Flow control on Tx
BIT1 NICRx optional, // Network independent clock on RX
BIT1 NICTx optional, // Network independent clock on TX
BIT2 IntRate optional, // Intermediate rate
BIT1 ExtI_6 optional, // Extension indicator (0/1)
BIT1 Spare_2 optional, // Spare
BIT1 InBndNeg optional, // In-band/out-band negotiation
BIT1 Ass optional, // Assignor/assignee
BIT1 LLINeg optional, // Logical link identifier negotiation
BIT1 Mode optional, // Mode of operation
BIT1 MultFr optional, // Multiple frame establishment support in data link
BIT1 Hdr optional, // Rate adaption header/no header
BIT1 ExtI_7 optional, // Extension indicator (0/1)
BIT3 Prty optional, // Parity INFormation
BIT2 NDatBit optional, // Number of data bits excluding parity bit if pres.
BIT2 NStpBit optional, // Number of stop bits
BIT1 ExtI_8 optional, // Extension indicator (1)
BIT6 MdmTyp optional, // Modem type
BIT1 DupMod optional, // Mode duplex
BIT1 ExtI_9 optional, // Extension indicator (1)
BIT5 UInf2 optional, // User INFormation layer 2 protocol
BIT2 Lay2 optional, // Layer identification
BIT1 ExtI_10 optional, // Extension indicator (1)
BIT5 UInf3 optional, // User INFormation layer 3 protocol
BIT2 Lay3 optional, // Layer identification
BIT1 ExtI_11 optional // Extension indicator (1)
} with { variant "" };
*/
//************************************************************************
// User Teleservice Information
// Ericsson Specification Reference: Chapter 2.3.3.75
// Standard Reference ISUP : Chapter 3.59
//************************************************************************
type record User_teleservice_information
{
BIT8 id,
INT1 lengthField,
BIT2 Pres, // Presentation
BIT3 Interpr, // Interpretation
BIT2 CodS, // Coding standard
BIT1 ExtI_1, // Extention indicator, always 1
BIT7 HLChrInf, // High layer characteristics identification
BIT1 ExtI_2, // Extension indicator, (0/1)
BIT7 ExHLChrInf optional, // Extended high layer characteristics id.
BIT1 ExtI_3 optional // Extention indicator, always 1
} with { variant (ExHLChrInf) "PRESENCE(ExtI_2 = '0'B)";
variant (ExtI_3) "PRESENCE(ExtI_2 = '0'B)";
variant "PRESENCE( id = '00110100'B)";
variant (lengthField)"LENGTHTO(Pres,Interpr,CodS,ExtI_1,HLChrInf,
ExtI_2,ExHLChrInf,ExtI_3)";
};
//************************************************************************
// User To User Indicators
// Ericsson Specification Reference: Chapter 2.3.3.76
// Standard Reference ISUP : Chapter 3.60
//************************************************************************
type record User_to_user_indicators
{
BIT8 id,
INT1 lengthField,
BIT1 Type, // type
BIT2 Service1, // Service 1
BIT2 Service2, // Service 2
BIT2 Service3, // Service 3
BIT1 NetworkDiscardInd //Network discard ind. (spare if Type = request)
} with { variant "PRESENCE( id = '00101010'B)";
variant (lengthField)"LENGTHTO(Type,Service1,Service2,Service3,
NetworkDiscardInd)";
};
//************************************************************************
// User To User Information
// Ericsson Specification Reference: Chapter 2.3.3.77
// Standard Reference ISUP : Chapter 3.61
//************************************************************************
type record User_to_user_information_OPT
{
BIT8 id,
INT1 lengthField,
OCTN UserInfo
} with { variant "PRESENCE( id = '00100000'B)";
variant (lengthField)"LENGTHTO(UserInfo)";
};
type record User_to_user_information
{
INT1 lengthField,
OCTN UserInfo
} with { variant (lengthField)"LENGTHTO(UserInfo)";
};
//************************************************************************
// Global Call Reference
// GCR included in ISUP market variants based on EED/X 1056-174 Uen - Global
// Call reference for ISUP and BICC, MSC R12.
// It is used in the IAM message. See section 3.1.1 for details.
//************************************************************************
type record Global_call_reference
{
BIT8 id,
INT1 lengthField,
INT1 netwIdLenInd, // Network ID length indicator
OCTN netwId, // Network ID
INT1 nodeIdLenInd, // Node ID length indicator
OCTN nodeId, // Node ID
INT1 callRefLenInd, // Call Reference length indicator
OCTN callRefId // Call Reference ID
} with { variant (netwIdLenInd) "LENGTHTO (netwId)";
variant (nodeIdLenInd) "LENGTHTO(nodeId)";
variant (callRefLenInd) "LENGTHTO (callRefId)";
variant "PRESENCE( id = '10100100'B)";
variant (lengthField)"LENGTHTO(netwIdLenInd,netwId,nodeIdLenInd,
nodeId,callRefLenInd,callRefId)";
};
} // END Group ISUP_parameters
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
// ACM - Address complete
// Ericsson Specification Reference: Chapter 2.2.2.1
// Standard Reference ISUP : Chapter 4, Table 21
//************************************************************************
type set ACM_optional_part
{
Optional_backward_call_indicators optBackwardCallInd optional,
Cause_indicators_OPT causeInd optional,
User_to_user_indicators userToUserInd optional,
User_to_user_information_OPT userToUserInfo optional,
Access_transport accessTransport optional,
Generic_notification_indicator_set genericNotificationInd optional,
Transmission_medium_used transMediumUsed optional,
Access_delivery_information accessDeliveryInfo optional,
Redirection_number redirectionNum optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_diversion_information callDiversionInfo optional,
Network_specific_facility networkFacility optional,
Redirection_number_restriction redirectionNumRest optional,
Route_identity routeIdentity optional,
Call_transfer_treatment_indicators callTransferTreatmentInd optional,
Conference_treatment_indicators conferenceTreatmentInd optional,
Call_reference callReference optional,
Echo_control_information echoControlInfo optional,
Remote_operations remoteOperations optional,
Service_activation serviceActivation optional,
UID_action_indicators UIDAcInd optional,
Application_transport_parameter_set ATPP optional,
CCNR_possible_indicator CCNRP optional,
HTR_information HTRInfo optional,
Pivot_routing_backward_information PRBI optional,
Redirect_status RedirSt optional
} with { variant (ATPP,genericNotificationInd) "REPEATABLE(yes)";};
type record ACM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Backward_call_indicators backwardCallInd,
Pointer opt_part_ptr,
ACM_optional_part acmOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (acmOptionals)"};
//************************************************************************
// ANM - Answer
// Ericsson Specification Reference: Chapter 2.2.2.2
// Standard Reference ISUP : Chapter 4, Table 22
//************************************************************************
type set ANM_optional_part
{
Backward_call_indicators_OPT backwardCallInd optional,
Optional_backward_call_indicators optBackwardCallInd optional,
User_to_user_indicators userToUserInd optional,
User_to_user_information_OPT userToUserInfo optional,
Connected_number connectedNum optional,
Access_transport accessTransport optional,
Access_delivery_information accessDeliveryInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Backward_GVNS backwardGVNS optional,
Call_history_information callHistoryInfo optional,
Generic_number_set genericNum optional,
Transmission_medium_used transMediumUsed optional,
Network_specific_facility networkFacility optional,
Redirection_number_restriction redirectionNumRest optional,
Call_transfer_treatment_indicators callTransferTreatmentInd optional,
Conference_treatment_indicators conferenceTreatmentInd optional,
Call_reference callReference optional,
Generic_notification_indicator_set genericNotificationInd optional,
Remote_operations remoteOperations optional,
Redirection_number redirectionNum optional,
Service_activation serviceActivation optional,
Echo_control_information echoControlInfo optional,
Display_information DisInf optional,
Application_transport_parameter_set ATPP optional,
Pivot_routing_backward_information PRBI optional,
Redirect_status RedirSt optional
} with { variant (ATPP,genericNotificationInd,genericNum) "REPEATABLE(yes)";};
type record ANM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
ANM_optional_part anmOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr)"POINTERTO (anmOptionals)";
};
//************************************************************************
// APM - Application Transport
// Standard Reference ISUP : Chapter 4, Table 51
//************************************************************************
type set APM_optional_part
{
Message_compatibility_information MCI optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Application_transport_parameter_set ATPP optional
} with { variant (ATPP) "REPEATABLE(yes)";};
type record APM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
APM_optional_part apmOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (apmOptionals)";
};
//************************************************************************
// BLO - Blocking
// Ericsson Specification Reference: Chapter 2.2.2.3
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record BLO_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// BLA - Blocking Acknowledgement
// Ericsson Specification Reference: Chapter 2.2.2.4
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record BLA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// CPG - Call Progress
// Ericsson Specification Reference: Chapter 2.2.2.5
// Standard Reference ISUP : Chapter 4, Table 23
//************************************************************************
type set CPG_optional_part
{
Cause_indicators_OPT causeInd optional,
Backward_call_indicators_OPT backwardCallInd optional,
Optional_backward_call_indicators optBackwardCallInd optional,
Access_transport accessTransport optional,
User_to_user_indicators userToUserInd optional,
Redirection_number redirectionNum optional,
User_to_user_information_OPT userToUserInfo optional,
Generic_notification_indicator_set genericNotificationInd optional,
Network_specific_facility networkFacility optional,
Transmission_medium_used transMediumUsed optional,
Access_delivery_information accessDeliveryInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_diversion_information callDiversionInfo optional,
Redirection_number_restriction redirectionNumRest optional,
Call_transfer_number callTransferNumber optional,
Call_transfer_treatment_indicators callTransferTreatmentInd optional,
Conference_treatment_indicators conferenceTreatmentInd optional,
Call_reference callReference optional,
Remote_operations remoteOperations optional,
Service_activation serviceActivation optional,
Echo_control_information echoControlInfo optional,
Connected_number connectedNum optional,
Backward_GVNS backwardGVNS optional,
Generic_number_set genericNum optional,
Call_history_information callHistoryInfo optional,
UID_action_indicators UIDAcInd optional,
Application_transport_parameter_set ATPP optional,
CCNR_possible_indicator CCNRP optional,
Pivot_routing_backward_information PRBI optional,
Redirect_status RedirSt optional
} with { variant (ATPP,genericNotificationInd,genericNum) "REPEATABLE(yes)";};
type record CPG_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Event_information eventInfo,
Pointer opt_part_ptr,
CPG_optional_part cpgOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (cpgOptionals)";
};
//************************************************************************
// CRG - Charge Information
// Ericsson Specification Reference: Chapter 2.2.2.6
//************************************************************************
type set CRG_optional_part
{
Meter_pulse_indicator meterPulseInd optional,
Tariff_indicator tariffInd optional,
Parameter_compatibility_information paramCompatibilityInfo optional
} with { variant "" };
type record CRG_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
CRG_optional_part crgOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr)"POINTERTO (crgOptionals)";
};
//************************************************************************
// CGB - Circuit Group Blocking
// Ericsson Specification Reference: Chapter 2.2.2.7
// Standard Reference ISUP : Chapter 4, Table 40
//************************************************************************
type record CGB_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Circuit_group_supervision_message_type_indicator circuitGroupSupervMsgInd,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr) "POINTERTO (rangeAndStatus)";
};
//************************************************************************
// CGBA - Circuit Group Blocking Acknowledgement
// Ericsson Specification Reference: Chapter 2.2.2.8
// Standard Reference ISUP : Chapter 4, Table 40
//************************************************************************
type record CGBA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Circuit_group_supervision_message_type_indicator circuitGroupSupervMsgInd,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr) "POINTERTO (rangeAndStatus)";
};
//************************************************************************
// CQM - Circuit Group Query
// Ericsson Specification Reference: Chapter 2.2.2.9
// Standard Reference ISUP : Chapter 4, Table 41
//************************************************************************
type record CQM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr) "POINTERTO (rangeAndStatus)";
};
//************************************************************************
// CQR - Circuit Group Query Response
// Ericsson Specification Reference: Chapter 2.2.2.10
// Standard Reference ISUP : Chapter 4, Table 24
//************************************************************************
type record CQR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var1_part_ptr,
Pointer var2_part_ptr,
Range_and_status rangeAndStatus,
Circuit_state_indicator circuitStateInd
} with { variant (var1_part_ptr) "POINTERTO (rangeAndStatus)";
variant (var2_part_ptr) "POINTERTO (circuitStateInd)";
};
//************************************************************************
// GRS - Circuit Group Reset
// Ericsson Specification Reference: Chapter 2.2.2.11
// Standard Reference ISUP : Chapter 4, Table 41
//************************************************************************
type record GRS_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr) "POINTERTO (rangeAndStatus)";
};
//************************************************************************
// GRA - Circuit Group Reset Acknowledgement
// Ericsson Specification Reference: Chapter 2.2.2.12
// Standard Reference ISUP : Chapter 4, Table 25
//************************************************************************
type record GRA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr) "POINTERTO (rangeAndStatus)";
};
//************************************************************************
// GGU - Circuit Group Unblocking
// Ericsson Specification Reference: Chapter 2.2.2.13
// Standard Reference ISUP : Chapter 4, Table 40
//************************************************************************
type record CGU_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Circuit_group_supervision_message_type_indicator circuitGroupSupervMsgInd,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr) "POINTERTO (rangeAndStatus)";
};
//************************************************************************
// CGUA - Circuit Group Unblocking Acknowledgement
// Ericsson Specification Reference: Chapter 2.2.2.14
// Standard Reference ISUP : Chapter 4, Table 40
//************************************************************************
type record CGUA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Circuit_group_supervision_message_type_indicator circuitGroupSupervMsgInd,
Pointer var_part_ptr,
Range_and_status rangeAndStatus
} with { variant (var_part_ptr)"POINTERTO (rangeAndStatus)";
};
//************************************************************************
// CFN - Confusion
// Ericsson Specification Reference: Chapter 2.2.2.15
// Standard Reference ISUP : Chapter 4, Table 26
//************************************************************************
type record CFN_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Pointer opt_part_ptr,
Cause_indicators causeInd,
End_of_optional_parameters_indicator endOfOp
} with { variant (var_part_ptr)"POINTERTO (causeInd)";
variant (opt_part_ptr)"POINTERTO (endOfOp)";
};
//************************************************************************
// CON - Connect
// Ericsson Specification Reference: Chapter 2.2.2.16
// Standard Reference ISUP : Chapter 4, Table 27
//************************************************************************
type set CON_optional_part
{
Optional_backward_call_indicators optBackwardCallInd optional,
Backward_GVNS backwardGVNS optional,
Connected_number connectedNum optional,
User_to_user_indicators userToUserInd optional,
User_to_user_information_OPT userToUserInfo optional,
Access_transport accessTransport optional,
Network_specific_facility networkFacility optional,
Transmission_medium_used transMediumUsed optional,
Access_delivery_information accessDeliveryInfo optional,
Call_history_information callHistoryInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Generic_number_set genericNum optional,
Route_identity routeIdentity optional,
Redirection_number_restriction redirectionNumRest optional,
Call_transfer_treatment_indicators callTransferTreatmentInd optional,
Conference_treatment_indicators conferenceTreatmentInd optional,
Call_reference callReference optional,
Generic_notification_indicator_set genericNotificationInd optional,
Remote_operations remoteOperations optional,
Echo_control_information echoControlInfo optional,
Service_activation serviceActivation optional,
Application_transport_parameter_set ATPP optional,
HTR_information HTRInfo optional,
Pivot_routing_backward_information PRBI optional,
Redirect_status RedirSt optional
} with { variant (ATPP,genericNotificationInd,genericNum) "REPEATABLE(yes)";};
type record CON_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Backward_call_indicators backwardCallInd,
Pointer opt_part_ptr,
CON_optional_part conOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (conOptionals)";
};
//************************************************************************
// COT - Continuity
// Ericsson Specification Reference: Chapter 2.2.2.17
// Standard Reference ISUP : Chapter 4, Table 28
//************************************************************************
type record COT_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Continuity_indicators continuityInd
} with { variant "" };
//************************************************************************
// CCR - Continuity Check Request
// Ericsson Specification Reference: Chapter 2.2.2.18
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record CCR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// FAC - Facility
// Ericsson Specification Reference: Chapter 2.2.2.19
// Standard Reference ISUP : Chapter 4, Table 45
//************************************************************************
type set FAC_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Service_activation serviceActivation optional,
Call_transfer_number callTransferNumber optional,
Access_transport accessTransport optional,
Generic_notification_indicator_set genericNotificationInd optional,
Remote_operations remoteOperations optional,
Redirection_number redirectionNum optional,
Pivot_routing_indicators PRInd optional,
Pivot_status PSts optional,
Pivot_counter PCount optional,
Pivot_routing_backward_information PRBI optional,
Redirect_status RedirSt optional
} with { variant (genericNotificationInd) "REPEATABLE(yes)";};
type record FAC_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
FAC_optional_part facOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr)"POINTERTO (facOptionals)";
};
//************************************************************************
// FAA - Facility Accepted
// Ericsson Specification Reference: Chapter 2.2.2.20
// Standard Reference ISUP : Chapter 4, Table 42
//************************************************************************
type set FAA_optional_part
{
User_to_user_indicators userToUserInd optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_reference callReference optional,
Connection_request connectionRequest optional
} with { variant "" };
type record FAA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Facility_indicator facilityInd,
Pointer opt_part_ptr,
FAA_optional_part faaOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (faaOptionals)";
};
//************************************************************************
// FRJ - Facility Reject
// Ericsson Specification Reference: Chapter 2.2.2.21
// Standard Reference ISUP : Chapter 4, Table 29
//************************************************************************
type set FRJ_optional_part
{
User_to_user_indicators userToUserInd optional
} with { variant "" };
type record FRJ_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Facility_indicator facilityInd,
Pointer var_part_ptr,
Pointer opt_part_ptr,
Cause_indicators causeInd,
FRJ_optional_part frjOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (var_part_ptr) "POINTERTO (causeInd)";
variant (opt_part_ptr) "POINTERTO (frjOptionals)";
};
//************************************************************************
// FAR - Facility Request
// Ericsson Specification Reference: Chapter 2.2.2.22
// Standard Reference ISUP : Chapter 4, Table 42
//************************************************************************
type set FAR_optional_part
{
User_to_user_indicators userToUserInd optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_reference callReference optional,
Connection_request connectionRequest optional
} with { variant "" };
type record FAR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Facility_indicator facilityInd,
Pointer opt_part_ptr,
FAR_optional_part farOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (farOptionals)";
};
//************************************************************************
// FOT - Forward Transfer
// Ericsson Specification Reference: Chapter 2.2.2.23
// Standard Reference ISUP : Chapter 4, Table 37
//************************************************************************
type set FOT_optional_part
{
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_reference callReference optional
} with { variant "" };
type record FOT_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
FOT_optional_part fotOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (fotOptionals)";
};
//************************************************************************
// IDR - Identification Request
// Ericsson Specification Reference: Chapter 2.2.2.24
// Standard Reference ISUP : Chapter 4, Table 47
//************************************************************************
type set IDR_optional_part
{
MCID_request_indicators MCIDReqInd optional,
Message_compatibility_information messageCompatibilityInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional
} with { variant "" };
type record IDR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
IDR_optional_part idrOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (idrOptionals)";
};
//************************************************************************
// IRS - Identification Response
// Ericsson Specification Reference: Chapter 2.2.2.25
// Standard Reference ISUP : Chapter 4, Table 48
//************************************************************************
type set IRS_optional_part
{
MCID_response_indicators MCIDRpInd optional,
Message_compatibility_information messageCompatibilityInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Calling_party_number callingPartyNum optional,
Access_transport accessTransport optional,
Generic_number_set genericNum optional,
Charged_party_identification ChPId optional
} with { variant (genericNum) "REPEATABLE(yes)";};
type record IRS_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
IRS_optional_part irsOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (irsOptionals)";
};
//************************************************************************
// INF - Information
// Ericsson Specification Reference: Chapter 2.2.2.26
// Standard Reference ISUP : Chapter 4, Table 30
//************************************************************************
type set INF_optional_part
{
Calling_partys_category_OPT callingPartyCat optional,
Calling_party_number callingPartyNum optional,
Access_transport accessTransport optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Network_specific_facility networkFacility optional,
Display_information displayInfo optional,
Call_reference callReference optional,
Connection_request connectionRequest optional
} with { variant "" };
type record INF_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Information_indicators informationInd,
Pointer opt_part_ptr,
INF_optional_part infOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (infOptionals)";
};
//************************************************************************
// INR - Information Request
// Ericsson Specification Reference: Chapter 2.2.2.27
// Standard Reference ISUP : Chapter 4, Table 31
//************************************************************************
type set INR_optional_part
{
Network_specific_facility networkFacility optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_reference callReference optional
} with { variant "" };
type record INR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Information_request_indicators InfRqInd,
Pointer opt_part_ptr,
INR_optional_part inrOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (inrOptionals)";
};
//************************************************************************
// IAM - Initial Address Message
// Ericsson Specification Reference: Chapter 2.2.2.28
// Standard Reference ISUP : Chapter 4, Table 32
//************************************************************************
type set IAM_optional_part
{
Transit_network_selection transitNetworkSel optional,
Calling_party_number callingPartyNum optional,
Optional_forward_call_indicators optForwardCallInd optional,
Redirecting_number redirectingNum optional,
Redirection_information redirectionInfo optional,
Closed_user_group_interlock_code cUGInterlockCode optional,
Original_called_number originalCalledNum optional,
User_to_user_information_OPT userToUserInfo optional,
Access_transport accessTransport optional,
User_service_information userServiceInfo optional,
User_to_user_indicators userToUserInd optional,
Generic_number_set genericNum optional,
Propagation_delay_counter propDelayCounter optional,
User_service_information_prime userServiceInfoPrime optional,
Network_specific_facility networkFacility optional,
Generic_digits_set genericDigits optional,
Origination_ISC_point_code origISCPointCode optional,
User_teleservice_information userTeleServiceInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
MLPP_precedence mLPPprecedence optional,
Route_identity routeIdentity optional,
Transmission_medium_requirement_prime transMediumReqPrime optional,
Location_number locationNum optional,
Forward_GVNS forwardGVNS optional,
Freephone_indicators freePhoneInd optional,
CCSS_parameter ccssPar optional,
Distributed_dynamic_routing_indicators distrDynRoutInd optional,
Additional_charging_information addChargeInfo optional,
Additional_routing_information addRoutInfo optional,
Correlation_id correlationId optional,
SCF_id SCFId optional,
Call_transfer_treatment_indicators callTransferTreatmentInd optional,
Conference_treatment_indicators conferenceTreatmentInd optional,
Call_offering_treatment_indicators callOfferingTreatmentInd optional,
Call_diversion_treatment_indicators callDiversionTreatmentInd optional,
Network_call_reference netwCallRef optional,
Calling_name_identity cgNameId optional,
Hop_counter HopCnt optional,
Call_reference callReference optional,
Connection_request connectionRequest optional,
Remote_operations remoteOperations optional,
Generic_notification_indicator_set genericNotificationInd optional,
Service_activation serviceActivation optional,
Network_management_controls NetManCon optional,
Circuit_assignment_map CctAssMap optional,
Called_IN_number CdINnum optional,
UID_capability_indicators UIDcapInd optional,
Echo_control_information echoControlInfo optional,
Collect_call_request ColCReq optional,
Application_transport_parameter_set ATPP optional,
Pivot_capability PivCap optional,
Called_directory_number CDirNb optional,
Original_called_IN_number OCINNb optional,
Calling_geodetic_location CGeoLoc optional,
Network_routing_number NRNb optional,
Query_on_release_capability QoRCap optional,
Pivot_counter PCount optional,
Pivot_routing_forward_information PRFI optional,
Redirect_capability RedirCap optional,
Redirect_counter RedirCount optional,
Redirect_status RedirSt optional,
Redirect_forward_information RedirFI optional,
Number_portability_forward_information NPFI optional,
Global_call_reference GCRef optional
} with { variant (ATPP,genericNotificationInd,genericNum,genericDigits)
"REPEATABLE(yes)";};
type record IAM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Nature_of_connection_indicators natureOfConnInd,
Forward_call_indicators forwardCallInd,
Calling_partys_category callingPartyCat,
Transmission_medium_requirement transmissionMediumReq,
Pointer var_part_ptr,
Pointer opt_part_ptr,
Called_party_number calledPartyNum,
IAM_optional_part iamOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (var_part_ptr) "POINTERTO (calledPartyNum)";
variant (opt_part_ptr) "POINTERTO (iamOptionals)";
};
//************************************************************************
// IAM_PTSO - Initial Address Message
// Ericsson Specification Reference: Chapter 2.2.2.28
// Standard Reference ISUP : Chapter 4, Table 32
//************************************************************************
/*
type record PAR_GD
{
OCT1 parameter_type,
OCT1 lengthf,
Generic_digits parameter_contents
} with { variant "" };
type record PAR_OISCP
{
OCT1 parameter_type,
OCT1 lengthf,
Origination_ISC_point_code parameter_contents
} with { variant "" };
type record PAR_AT
{
OCT1 parameter_type,
OCT1 lengthf,
Access_transport parameter_contents
} with { variant "" };
type record PAR_CPN
{
OCT1 parameter_type,
OCT1 lengthf,
Called_party_number parameter_contents
} with { variant "" };
type record PAR_CGPN
{
OCT1 parameter_type,
OCT1 lengthf,
Called_party_number parameter_contents
} with { variant "" };
type set IAM_PTSO_optional_part
{
PAR_CGPN callingPartyNum,
PAR_AT accessTransport,
PAR_GD genericDigits,
PAR_OISCP origISCPointCode
} with { variant "" };
type record IAM_PTSO_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Nature_of_connection_indicators natureOfConnInd,
Forward_call_indicators forwardCallInd,
Calling_partys_category callingPartyCat,
Transmission_medium_requirement transmissionMediumReq,
Pointer var_part_ptr,
Pointer opt_part_ptr,
INT1 calledPartyNum_length,
PAR_CPN calledPartyNum,
IAM_PTSO_optional_part iamOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (var_part_ptr) "POINTERTO (calledPartyNum_length)";
variant (opt_part_ptr) "POINTERTO (iamOptionals)";
variant (calledPartyNum_length) "LENGTHTO (calledPartyNum)";
};
*/
//************************************************************************
// LPA - Loop Back Acknowledgement
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record LPA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// LOP - Loop Prevention
// Ericsson Specification Reference: Chapter 2.2.2.29
// Standard Reference ISUP : Chapter 4, Table 50
//************************************************************************
type set LOP_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_transfer_reference callTransferReference optional,
Loop_prevention_indicators loopPreventionInd optional
} with { variant "" };
type record LOP_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
LOP_optional_part lopOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (lopOptionals)";
};
//************************************************************************
// NRM - Network Resource Management
// Standard Reference ISUP : Chapter 4, Table 46
//************************************************************************
type set NRM_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Echo_control_information echoControlInfo optional
} with { variant "" };
type record NRM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
NRM_optional_part nrmOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (nrmOptionals)";
};
//************************************************************************
// OLM - Overload
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record OLM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// OPQ - Operator Queue FS: 2.2.2.32 / 61/15517-CRT 212 31 Uen Rev. A
//************************************************************************
/*
type set OPQ_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional
} with { variant "" };
type record OPQ_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
OPQ_optional_part opqOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (opqOptionals)" };
*/
//************************************************************************
// OPR - Operator
// Ericsson Specification Reference: Chapter 2.2.2.30
//************************************************************************
type set OPR_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional
} with { variant "" };
type record OPR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
OPR_optional_part oprOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (oprOptionals)";
};
//************************************************************************
// PAM - Pass-along
// Standard Reference ISUP : Chapter 4, Table 43
//************************************************************************
type record PAM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
OCTN contents optional
} with { variant (opt_part_ptr) "POINTERTO (contents)";
};
//************************************************************************
// PRI - Pre-release Information
// Standard Reference ISUP : Chapter 4, Table 52
//************************************************************************
type set PRI_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Optional_forward_call_indicators optForwardCallInd optional,
Optional_backward_call_indicators optBackwardCallInd optional,
Application_transport_parameter_set ATPP optional
} with { variant (ATPP)"REPEATABLE(yes)";};
type record PRI_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
PRI_optional_part priOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (priOptionals)";
};
//************************************************************************
// REL - Release
// Ericsson Specification Reference: Chapter 2.2.2.31
// Standard Reference ISUP : Chapter 4, Table 33
//************************************************************************
type set REL_optional_part
{
Access_transport accessTransport optional,
User_to_user_indicators userToUserInd optional,
User_to_user_information_OPT userToUserInfo optional,
Automatic_congestion_level autCongLevel optional,
Network_specific_facility networkFacility optional,
Access_delivery_information accessDeliveryInfo optional,
Redirection_number redirectionNum optional,
Redirection_information redirectionInfo optional,
Parameter_compatibility_information paramCompatibilityInfo optional,
Signalling_point_code sigPointCode optional,
Display_information displayInfo optional,
Remote_operations remoteOperations optional,
HTR_information HTRInfo optional,
Redirect_counter RedirCount optional,
Redirection_number_restriction redirectionNumRest optional,
Redirect_backward_information RedirBI optional
} with { variant "" };
type record REL_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Pointer opt_part_ptr,
Cause_indicators causeInd,
REL_optional_part relOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (var_part_ptr) "POINTERTO (causeInd)";
variant (opt_part_ptr) "POINTERTO (relOptionals)";
};
//************************************************************************
// RLC - Release Complete
// Ericsson Specification Reference: Chapter 2.2.2.32
// Standard Reference ISUP : Chapter 4, Table 34
//************************************************************************
type set RLC_optional_part
{
Cause_indicators_OPT causeInd optional
} with { variant "" };
type record RLC_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
RLC_optional_part rlcOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (rlcOptionals)";
};
//************************************************************************
// RSC - Reset Circuit
// Ericsson Specification Reference: Chapter 2.2.2.33
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record RSC_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// RES - Resume
// Ericsson Specification Reference: Chapter 2.2.2.34
// Standard Reference ISUP : Chapter 4, Table 38
//************************************************************************
type set RES_optional_part
{
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_reference callReference optional
} with { variant "" };
type record RES_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Suspend_resume_indicators SUSRESInd,
Pointer opt_part_ptr,
RES_optional_part resOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (resOptionals)";
};
//************************************************************************
// SGM - Segmentation
// Ericsson Specification Reference: Chapter 2.2.2.35
// Standard Reference ISUP : Chapter 4, Table 49
//************************************************************************
type set SGM_optional_part
{
Access_transport accessTransport optional,
User_to_user_information_OPT userToUserInfo optional,
Message_compatibility_information messageCompatibilityInfo optional,
Generic_digits_set genericDigits optional,
Generic_notification_indicator_set genericNotificationInd optional,
Generic_number_set genericNum optional,
Calling_name_identity cgNameId optional
} with { variant (genericNotificationInd,genericNum,genericDigits)
"REPEATABLE(yes)";};
type record SGM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
SGM_optional_part sgmOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (sgmOptionals)";
};
//************************************************************************
// SCB - Special Clear Back
// Ericsson Specification Reference: Chapter 2.2.2.36
//************************************************************************
type set SCB_optional_part
{
Message_compatibility_information messageCompatibilityInfo optional
} with { variant "" };
type record SCB_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
SCB_optional_part scbOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (scbOptionals)";
};
//************************************************************************
// SAM - Subsequent Address
// Ericsson Specification Reference: Chapter 2.2.2.37
// Standard Reference ISUP : Chapter 4, Table 35
//************************************************************************
type record SAM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Pointer opt_part_ptr,
Subsequent_number subsequentNum,
End_of_optional_parameters_indicator endOfOp
} with { variant (var_part_ptr) "POINTERTO (subsequentNum)";
variant (opt_part_ptr) "POINTERTO (endOfOp)";
};
//************************************************************************
// SDM - Subsequent Directory Number
// Standard Reference ISUP : Chapter 4, Table 53
//************************************************************************
type set SDM_optional_part
{
Subsequent_number_OPT subsequentNum optional,
Message_compatibility_information messageCompatibilityInfo optional
} with { variant "" };
type record SDM_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
SDM_optional_part sdmOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (sdmOptionals)";
};
//************************************************************************
// SUS - Suspend
// Ericsson Specification Reference: Chapter 2.2.2.38
// Standard Reference ISUP : Chapter 4, Table 38
//************************************************************************
type set SUS_optional_part
{
Parameter_compatibility_information paramCompatibilityInfo optional,
Call_reference callReference optional
} with { variant "" };
type record SUS_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Suspend_resume_indicators SUSRESInd,
Pointer opt_part_ptr,
SUS_optional_part susOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (susOptionals)";
};
//************************************************************************
// UBL - Unblocking
// Ericsson Specification Reference: Chapter 2.2.2.39
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record UBL_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// UBA - Unblocking Acknowledgement
// Ericsson Specification Reference: Chapter 2.2.2.40
// Standard Reference ISUP : Chapter 4, Table 39
//************************************************************************
type record UBA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//***************************************************************************
// UCIC - Unequipped Circuit Identification Code
// Ericsson Specification Reference: Chapter 2.2.2.41
// Standard Reference ISUP : Chapter 4, Table 39
//***************************************************************************
type record UCIC_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType
} with { variant "" };
//************************************************************************
// UPA - User Part Available
// Ericsson Specification Reference: Chapter 2.2.2.42
// Standard Reference ISUP : Chapter 4, Table 44
//************************************************************************
type set UPA_optional_part
{
Parameter_compatibility_information paramCompatibilityInfo optional
} with { variant ""};
type record UPA_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
UPA_optional_part upaOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (upaOptionals)";
};
//************************************************************************
// UPT - User Part Test
// Ericsson Specification Reference: Chapter 2.2.2.43
// Standard Reference ISUP : Chapter 4, Table 44
//************************************************************************
type set UPT_optional_part
{
Parameter_compatibility_information paramCompatibilityInfo optional
} with { variant "" };
type record UPT_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer opt_part_ptr,
UPT_optional_part uptOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (opt_part_ptr) "POINTERTO (uptOptionals)";
};
//************************************************************************
// USR - User-to-user Information
// Ericsson Specification Reference: Chapter 2.2.2.44
// Standard Reference ISUP : Chapter 4, Table 36
//************************************************************************
type set USR_optional_part
{
Access_transport accessTransport optional,
Parameter_compatibility_information paramCompatibilityInfo optional
} with { variant "" };
type record USR_parameters
{
Circuit_identification_code cic optional,
ISUP_Message_type messageType,
Pointer var_part_ptr,
Pointer opt_part_ptr,
User_to_user_information userToUserInfo,
USR_optional_part usrOptionals optional,
End_of_optional_parameters_indicator endOfOp optional
} with { variant (var_part_ptr) "POINTERTO (userToUserInfo)";
variant (opt_part_ptr) "POINTERTO (usrOptionals)";
};
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
// Top level PDU
//************************************************************************
type union PDU_ISUP
{
ACM_parameters ISUP_ACM, //Address complete
ANM_parameters ISUP_ANM, //Answer
APM_parameters ISUP_APM, //Application transport
BLO_parameters ISUP_BLO, //Blocking
BLA_parameters ISUP_BLA, //Blocking acknowledgement
CPG_parameters ISUP_CPG, //Call progress
CGB_parameters ISUP_CGB, //Circuit group BLOcking
CGBA_parameters ISUP_CGBA, //Circuit group BLOcking acknowledgement
CQM_parameters ISUP_CQM, //Circuit group query
CQR_parameters ISUP_CQR, //Circuit group query RESponse
GRS_parameters ISUP_GRS, //Circuit group RESet
GRA_parameters ISUP_GRA, //Circuit group RESet acknowledge
CGU_parameters ISUP_CGU, //Circuit group unblocking
CGUA_parameters ISUP_CGUA, //Circuit group unblocking acknowledgement
CRG_parameters ISUP_CRG, //Charge INFormation
CFN_parameters ISUP_CFN, //Confusion
CON_parameters ISUP_CON, //Connect
COT_parameters ISUP_COT, //Continuity
CCR_parameters ISUP_CCR, //Continuity check request
FAC_parameters ISUP_FAC, //Facility
FAA_parameters ISUP_FAA, //Facility accepted
FRJ_parameters ISUP_FRJ, //Facility reject
FAR_parameters ISUP_FAR, //Facility request
FOT_parameters ISUP_FOT, //Forward transfer
IDR_parameters ISUP_IDR, //Identification request
IRS_parameters ISUP_IRS, //Identification RESponse
INF_parameters ISUP_INF, //Information
INR_parameters ISUP_INR, //Information request
IAM_parameters ISUP_IAM, //Initial address
// IAM_PTSO_parameters ISUP_IAM_PTSO, //Modified Initial address
LPA_parameters ISUP_LPA, //Loop back acknowlwdgement
LOP_parameters ISUP_LOP, //Loop prevention
NRM_parameters ISUP_NRM, //Network RESource management
OLM_parameters ISUP_OLM, //Overload
// OPQ_parameters ISUP_OPQ, //Operator Queue
OPR_parameters ISUP_OPR, //Operator
PAM_parameters ISUP_PAM, //Pass-along
PRI_parameters ISUP_PRI, //Pre-release INFormation
REL_parameters ISUP_REL, //Release
RLC_parameters ISUP_RLC, //Release complete
RSC_parameters ISUP_RSC, //Reset circuit
RES_parameters ISUP_RES, //Resume
SGM_parameters ISUP_SGM, //Segmentation
SAM_parameters ISUP_SAM, //Subsequent
SCB_parameters ISUP_SCB, //Special Clear Back
SDM_parameters ISUP_SDM, //Subsequent Directory Number
SUS_parameters ISUP_SUS, //Suspend
UBL_parameters ISUP_UBL, //Unblocking
UBA_parameters ISUP_UBA, //Unblocking acknowledge
UCIC_parameters ISUP_UCIC, //Unequipped cic
UPA_parameters ISUP_UPA, //User part available
UPT_parameters ISUP_UPT, //User part test
USR_parameters ISUP_USR //User-to-user INFormation
} with { variant "TAG(
ISUP_ACM, messageType = '00000110'B;
ISUP_ANM, messageType = '00001001'B;
ISUP_APM, messageType = '01000001'B;
ISUP_BLO, messageType = '00010011'B;
ISUP_BLA, messageType = '00010101'B;
ISUP_CPG, messageType = '00101100'B;
ISUP_CGB, messageType = '00011000'B;
ISUP_CGBA, messageType = '00011010'B;
ISUP_CQM, messageType = '00101010'B;
ISUP_CQR, messageType = '00101011'B;
ISUP_GRS, messageType = '00010111'B;
ISUP_GRA, messageType = '00101001'B;
ISUP_CGU, messageType = '00011001'B;
ISUP_CGUA, messageType = '00011011'B;
ISUP_CRG, messageType = '00110001'B;
ISUP_CFN, messageType = '00101111'B;
ISUP_CON, messageType = '00000111'B;
ISUP_COT, messageType = '00000101'B;
ISUP_CCR, messageType = '00010001'B;
ISUP_FAC, messageType = '00110011'B;
ISUP_FAA, messageType = '00100000'B;
ISUP_FRJ, messageType = '00100001'B;
ISUP_FAR, messageType = '00011111'B;
ISUP_FOT, messageType = '00001000'B;
ISUP_IDR, messageType = '00110110'B;
ISUP_IRS, messageType = '00110111'B;
ISUP_INF, messageType = '00000100'B;
ISUP_INR, messageType = '00000011'B;
ISUP_IAM, messageType = '00000001'B;
// ISUP_IAM_PTSO, messageType = '00000001'B;
ISUP_LPA, messageType = '00100100'B;
ISUP_LOP, messageType = '01000000'B;
ISUP_NRM, messageType = '00110010'B;
ISUP_OLM, messageType = '00110000'B;
// ISUP_OPQ, messageType = '11111110'B;
ISUP_OPR, messageType = '11111111'B;
ISUP_PAM, messageType = '00101000'B;
ISUP_PRI, messageType = '01000010'B;
ISUP_REL, messageType = '00001100'B;
ISUP_RLC, messageType = '00010000'B;
ISUP_RSC, messageType = '00010010'B;
ISUP_RES, messageType = '00001110'B;
ISUP_SGM, messageType = '00111000'B;
ISUP_SAM, messageType = '00000010'B;
ISUP_SCB, messageType = '11111001'B;
ISUP_SDM, messageType = '01000011'B;
ISUP_SUS, messageType = '00001101'B;
ISUP_UBL, messageType = '00010100'B;
ISUP_UBA, messageType = '00010110'B;
ISUP_UCIC, messageType = '00101110'B;
ISUP_UPA, messageType = '00110101'B;
ISUP_UPT, messageType = '00110100'B;
ISUP_USR, messageType = '00101101'B)"
};
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
//************************************************************************
}with{ encode "RAW"}//end module