<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
            targetNamespace="http://java.sun.com/xml/ns/javaee"
            xmlns:javaee="http://java.sun.com/xml/ns/javaee"
            xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            version="3.1">
  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
      
      Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.
      
      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.
      
      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"
      
      Contributor(s):
      
      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>
      <![CDATA[[
      This is the XML Schema for the EJB 3.1 deployment descriptor.
      
      All EJB deployment descriptors must indicate
      the schema by using the Java EE namespace:
      
      http://java.sun.com/xml/ns/javaee
      
      and by indicating the version of the schema by
      using the version element as shown below:
      
      <ejb-jar xmlns="http://java.sun.com/xml/ns/javaee"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
      	  http://java.sun.com/xml/ns/javaee/ejb-jar_3_1.xsd"
      version="3.1">
      ...
      </ejb-jar>
      
      The instance documents may indicate the published version of
      the schema using the xsi:schemaLocation attribute for the
      Java EE namespace with the following location:
      
      http://java.sun.com/xml/ns/javaee/ejb-jar_3_1.xsd
      
      ]]>
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      The following conventions apply to all Java EE
      deployment descriptor elements unless indicated otherwise.
      
      - In elements that specify a pathname to a file within the
      same JAR file, relative filenames (i.e., those not
      starting with "/") are considered relative to the root of
      the JAR file's namespace.  Absolute filenames (i.e., those
      starting with "/") also specify names in the root of the
      JAR file's namespace.  In general, relative names are
      preferred.  The exception is .war files where absolute
      names are preferred for consistency with the Servlet API.
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:include schemaLocation="javaee_6.xsd"/>


<!-- **************************************************** -->

  <xsd:element name="ejb-jar"
               type="javaee:ejb-jarType">
    <xsd:annotation>
      <xsd:documentation>

        This is the root of the ejb-jar deployment descriptor.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:key name="ejb-name-key">
      <xsd:annotation>
        <xsd:documentation>

          The ejb-name element contains the name of an enterprise
          bean. The name must be unique within the ejb-jar or
          .war file.
          
        </xsd:documentation>
      </xsd:annotation>
      <xsd:selector xpath="javaee:enterprise-beans/*"/>
      <xsd:field xpath="javaee:ejb-name"/>
    </xsd:key>
    <xsd:keyref name="ejb-name-references"
                refer="javaee:ejb-name-key">
      <xsd:annotation>
        <xsd:documentation>

          The keyref indicates the references from
          relationship-role-source must be to a specific ejb-name
          defined within the scope of enterprise-beans element. 
          
        </xsd:documentation>
      </xsd:annotation>
      <xsd:selector xpath=".//javaee:ejb-relationship-role/javaee:relationship-role-source"/>
      <xsd:field xpath="javaee:ejb-name"/>
    </xsd:keyref>
    <xsd:key name="role-name-key">
      <xsd:annotation>
        <xsd:documentation>

          A role-name-key is specified to allow the references
          from the security-role-refs.
          
        </xsd:documentation>
      </xsd:annotation>
      <xsd:selector xpath="javaee:assembly-descriptor/javaee:security-role"/>
      <xsd:field xpath="javaee:role-name"/>
    </xsd:key>
    <xsd:keyref name="role-name-references"
                refer="javaee:role-name-key">
      <xsd:annotation>
        <xsd:documentation>

          The keyref indicates the references from
          security-role-ref to a specified role-name.
          
        </xsd:documentation>
      </xsd:annotation>
      <xsd:selector xpath="javaee:enterprise-beans/*/javaee:security-role-ref"/>
      <xsd:field xpath="javaee:role-link"/>
    </xsd:keyref>
  </xsd:element>


<!-- **************************************************** -->

  <xsd:complexType name="access-timeoutType">
    <xsd:annotation>
      <xsd:documentation>

        The access-timeoutType represents the maximum amount of
        time (in a given time unit) that the container should wait for
        a concurrency lock before throwing a timeout exception to the
        client.
        
        A timeout value of 0 means concurrent access is not permitted.
        
        A timeout value of -1 means wait indefinitely to acquire a lock.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="timeout"
                   type="javaee:xsdIntegerType"/>
      <xsd:element name="unit"
                   type="javaee:time-unit-typeType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="async-methodType">
    <xsd:annotation>
      <xsd:documentation>

        The async-methodType element specifies that a session
        bean method has asynchronous invocation semantics.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="method-name"
                   type="javaee:string"/>
      <xsd:element name="method-params"
                   type="javaee:method-paramsType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="activation-configType">
    <xsd:annotation>
      <xsd:documentation>

        The activation-configType defines information about the
        expected configuration properties of the message-driven bean
        in its operational environment. This may include information
        about message acknowledgement, message selector, expected
        destination type, etc.
        
        The configuration information is expressed in terms of
        name/value configuration properties.
        
        The properties that are recognized for a particular
        message-driven bean are determined by the messaging type.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="activation-config-property"
                   type="javaee:activation-config-propertyType"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="activation-config-propertyType">
    <xsd:annotation>
      <xsd:documentation>

        The activation-config-propertyType contains a name/value
        configuration property pair for a message-driven bean.
        
        The properties that are recognized for a particular
        message-driven bean are determined by the messaging type.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="activation-config-property-name"
                   type="javaee:xsdStringType">
        <xsd:annotation>
          <xsd:documentation>

            The activation-config-property-name element contains
            the name for an activation configuration property of
            a message-driven bean.
            
            For JMS message-driven beans, the following property
            names are recognized: acknowledgeMode,
            messageSelector, destinationType, subscriptionDurability
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="activation-config-property-value"
                   type="javaee:xsdStringType">
        <xsd:annotation>
          <xsd:documentation>

            The activation-config-property-value element
            contains the value for an activation configuration
            property of a message-driven bean.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="around-invokeType">
    <xsd:annotation>
      <xsd:documentation>

        The around-invoke type specifies a method on a
        class to be called during the around invoke portion of an 
        ejb invocation.  Note that each class may have only one
        around invoke method and that the method may not be
        overloaded.
        
        If the class element is missing then
        the class defining the callback is assumed to be the
        interceptor class or component class in scope at the
        location in the descriptor in which the around invoke
        definition appears.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="class"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"/>
      <xsd:element name="method-name"
                   type="javaee:java-identifierType"/>
    </xsd:sequence>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="around-timeoutType">
    <xsd:annotation>
      <xsd:documentation>

        The around-timeout type specifies a method on a
        class to be called during the around-timeout portion of
        a timer timeout callback.  Note that each class may have 
        only one around-timeout method and that the method may not 
        be overloaded.
        
        If the class element is missing then
        the class defining the callback is assumed to be the
        interceptor class or component class in scope at the
        location in the descriptor in which the around-timeout
        definition appears.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="class"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"/>
      <xsd:element name="method-name"
                   type="javaee:java-identifierType"/>
    </xsd:sequence>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="assembly-descriptorType">
    <xsd:annotation>
      <xsd:documentation>

        The assembly-descriptorType defines
        application-assembly information.
        
        The application-assembly information consists of the
        following parts: the definition of security roles, the
        definition of method permissions, the definition of
        transaction attributes for enterprise beans with
        container-managed transaction demarcation, the definition
        of interceptor bindings, a list of
        methods to be excluded from being invoked, and a list of
        exception types that should be treated as application exceptions.
        
        All the parts are optional in the sense that they are
        omitted if the lists represented by them are empty.
        
        Providing an assembly-descriptor in the deployment
        descriptor is optional for the ejb-jar or .war file producer.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="security-role"
                   type="javaee:security-roleType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="method-permission"
                   type="javaee:method-permissionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="container-transaction"
                   type="javaee:container-transactionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="interceptor-binding"
                   type="javaee:interceptor-bindingType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="message-destination"
                   type="javaee:message-destinationType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="exclude-list"
                   type="javaee:exclude-listType"
                   minOccurs="0"/>
      <xsd:element name="application-exception"
                   type="javaee:application-exceptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="cmp-fieldType">
    <xsd:annotation>
      <xsd:documentation>

        The cmp-fieldType describes a container-managed field. The
        cmp-fieldType contains an optional description of the field,
        and the name of the field.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="field-name"
                   type="javaee:java-identifierType">
        <xsd:annotation>
          <xsd:documentation>

            The field-name element specifies the name of a
            container managed field.
            
            The name of the cmp-field of an entity bean with
            cmp-version 2.x must begin with a lowercase
            letter. This field is accessed by methods whose
            names consists of the name of the field specified by
            field-name in which the first letter is uppercased,
            prefixed by "get" or "set".
            
            The name of the cmp-field of an entity bean with
            cmp-version 1.x must denote a public field of the
            enterprise bean class or one of its superclasses.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="cmp-versionType">
    <xsd:annotation>
      <xsd:documentation>

        The cmp-versionType specifies the version of an entity bean
        with container-managed persistence. It is used by
        cmp-version elements.
        
        The value must be one of the two following:
        
        1.x
        2.x
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="1.x"/>
        <xsd:enumeration value="2.x"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="cmr-fieldType">
    <xsd:annotation>
      <xsd:documentation>

        The cmr-fieldType describes the bean provider's view of
        a relationship. It consists of an optional description, and
        the name and the class type of a field in the source of a
        role of a relationship. The cmr-field-name element
        corresponds to the name used for the get and set accessor
        methods for the relationship. The cmr-field-type element is
        used only for collection-valued cmr-fields. It specifies the
        type of the collection that is used.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="cmr-field-name"
                   type="javaee:string">
        <xsd:annotation>
          <xsd:documentation>

            The cmr-field-name element specifies the name of a
            logical relationship field in the entity bean
            class. The name of the cmr-field must begin with a
            lowercase letter. This field is accessed by methods
            whose names consist of the name of the field
            specified by cmr-field-name in which the first
            letter is uppercased, prefixed by "get" or "set".
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="cmr-field-type"
                   type="javaee:cmr-field-typeType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="cmr-field-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The cmr-field-type element specifies the class of a
        collection-valued logical relationship field in the entity
        bean class. The value of an element using cmr-field-typeType
        must be either: java.util.Collection or java.util.Set.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="java.util.Collection"/>
        <xsd:enumeration value="java.util.Set"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="concurrency-management-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The concurrency-management-typeType specifies the way concurrency
        is managed for a singleton or stateful session bean.  
        
        The concurrency management type must be one of the following:
        
        Bean
        Container
        
        Bean managed concurrency can only be specified for a singleton bean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Bean"/>
        <xsd:enumeration value="Container"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="concurrent-lock-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The concurrent-lock-typeType specifies how the container must
        manage concurrent access to a method of a Singleton bean 
        with container-managed concurrency.
        
        The container managed concurrency lock type must be one 
        of the following :
        
        Read
        Write
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Read"/>
        <xsd:enumeration value="Write"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="concurrent-methodType">
    <xsd:annotation>
      <xsd:documentation>

        The concurrent-methodType specifies information about a method
        of a bean with container managed concurrency.
        
        The optional lock element specifies the kind of concurrency 
        lock asssociated with the method.
        
        The optional access-timeout element specifies the amount of
        time (in a given time unit) the container should wait for a
        concurrency lock before throwing an exception to the client.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="method"
                   type="javaee:named-methodType"/>
      <xsd:element name="lock"
                   type="javaee:concurrent-lock-typeType"
                   minOccurs="0"/>
      <xsd:element name="access-timeout"
                   type="javaee:access-timeoutType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="container-transactionType">
    <xsd:annotation>
      <xsd:documentation>

        The container-transactionType specifies how the container
        must manage transaction scopes for the enterprise bean's
        method invocations. It defines an optional description, a
        list of method elements, and a transaction attribute. The
        transaction attribute is to be applied to all the specified
        methods.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="method"
                   type="javaee:methodType"
                   maxOccurs="unbounded"/>
      <xsd:element name="trans-attribute"
                   type="javaee:trans-attributeType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="depends-onType">
    <xsd:annotation>
      <xsd:documentation>

        The depends-onType is used to express initialization 
        ordering dependencies between Singleton components.
        The depends-onType specifies the names of one or more
        Singleton beans in the same application as the referring
        Singleton, each of which must be initialized before
        the referring bean.  
        
        Each dependent bean is expressed using ejb-link syntax.
        The order in which dependent beans are initialized at 
        runtime is not guaranteed to match the order in which
        they are listed.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="ejb-name"
                   type="javaee:ejb-linkType"
                   minOccurs="1"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-classType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The ejb-classType contains the fully-qualified name of the
        enterprise bean's class. It is used by ejb-class elements. 
        
        Example:
        
        <ejb-class>com.wombat.empl.EmployeeServiceBean</ejb-class>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-jarType">
    <xsd:annotation>
      <xsd:documentation>

        The ejb-jarType defines the root element of the EJB
        deployment descriptor. It contains
        
        - an optional description of the ejb-jar file
        - an optional display name
        - an optional icon that contains a small and a large
        icon file name
        - an optional module name. Only applicable to
        stand-alone ejb-jars or ejb-jars packaged in an ear.
        Ignored if specified for an ejb-jar.xml within a .war.
        In that case, standard .war module-name rules apply.
        - structural information about all included
        enterprise beans that is not specified through
        annotations
        - structural information about interceptor classes
        - a descriptor for container managed relationships, 
        if any. 
        - an optional application-assembly descriptor
        - an optional name of an ejb-client-jar file for the 
        ejb-jar.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="module-name"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="enterprise-beans"
                   type="javaee:enterprise-beansType"
                   minOccurs="0"/>
      <xsd:element name="interceptors"
                   type="javaee:interceptorsType"
                   minOccurs="0"/>
      <xsd:element name="relationships"
                   type="javaee:relationshipsType"
                   minOccurs="0">
        <xsd:unique name="relationship-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-relation-name contains the name of a
              relation. The name must be unique within
              relationships.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-relation"/>
          <xsd:field xpath="javaee:ejb-relation-name"/>
        </xsd:unique>
      </xsd:element>
      <xsd:element name="assembly-descriptor"
                   type="javaee:assembly-descriptorType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            Providing an assembly-descriptor in the deployment
            descriptor is optional for the ejb-jar or .war file
            producer.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="ejb-client-jar"
                   type="javaee:pathType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The optional ejb-client-jar element specifies a JAR
            file that contains the class files necessary for a
            client program to access the
            enterprise beans in the ejb-jar file.
            
            Example:
            
            	  <ejb-client-jar>employee_service_client.jar
            	  </ejb-client-jar>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="version"
                   type="javaee:dewey-versionType"
                   fixed="3.1"
                   use="required">
      <xsd:annotation>
        <xsd:documentation>

          The version specifies the version of the
          EJB specification that the instance document must 
          comply with. This information enables deployment tools
          to validate a particular EJB Deployment
          Descriptor with respect to a specific version of the EJB
          schema. 
          
        </xsd:documentation>
      </xsd:annotation>
    </xsd:attribute>
    <xsd:attribute name="metadata-complete"
                   type="xsd:boolean">
      <xsd:annotation>
        <xsd:documentation>

          The metadata-complete attribute defines whether this
          deployment descriptor and other related deployment
          descriptors for this module (e.g., web service
          descriptors) are complete, or whether the class
          files available to this module and packaged with
          this application should be examined for annotations
          that specify deployment information.
          
          If metadata-complete is set to "true", the deployment
          tool must ignore any annotations that specify deployment
          information, which might be present in the class files
          of the application.
          
          If metadata-complete is not specified or is set to
          "false", the deployment tool must examine the class
          files of the application for annotations, as
          specified by the specifications.
          
        </xsd:documentation>
      </xsd:annotation>
    </xsd:attribute>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-nameType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The ejb-nameType specifies an enterprise bean's name. It is
        used by ejb-name elements. This name is assigned by the
        file producer to name the enterprise bean in the
        ejb-jar or .war file's deployment descriptor. The name must be
        unique among the names of the enterprise beans in the same
        ejb-jar or .war file.
        
        There is no architected relationship between the used
        ejb-name in the deployment descriptor and the JNDI name that
        the Deployer will assign to the enterprise bean's home.
        
        The name for an entity bean must conform to the lexical
        rules for an NMTOKEN.
        
        Example:
        
        <ejb-name>EmployeeService</ejb-name>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:xsdNMTOKENType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-relationType">
    <xsd:annotation>
      <xsd:documentation>

        The ejb-relationType describes a relationship between two
        entity beans with container-managed persistence.  It is used
        by ejb-relation elements. It contains a description; an
        optional ejb-relation-name element; and exactly two
        relationship role declarations, defined by the
        ejb-relationship-role elements. The name of the
        relationship, if specified, is unique within the ejb-jar
        file.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-relation-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The ejb-relation-name element provides a unique name
            within the ejb-jar file for a relationship.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="ejb-relationship-role"
                   type="javaee:ejb-relationship-roleType"/>
      <xsd:element name="ejb-relationship-role"
                   type="javaee:ejb-relationship-roleType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="ejb-relationship-roleType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The ejb-relationship-roleType describes a role within a
        relationship. There are two roles in each relationship.
        
        The ejb-relationship-roleType contains an optional
        description; an optional name for the relationship role; a
        specification of the multiplicity of the role; an optional
        specification of cascade-delete functionality for the role;
        the role source; and a declaration of the cmr-field, if any,
        by means of which the other side of the relationship is
        accessed from the perspective of the role source.
        
        The multiplicity and role-source element are mandatory.
        
        The relationship-role-source element designates an entity
        bean by means of an ejb-name element. For bidirectional
        relationships, both roles of a relationship must declare a
        relationship-role-source element that specifies a cmr-field
        in terms of which the relationship is accessed. The lack of
        a cmr-field element in an ejb-relationship-role specifies
        that the relationship is unidirectional in navigability and
        the entity bean that participates in the relationship is
        "not aware" of the relationship.
        
        Example:
        
        <ejb-relation>
        <ejb-relation-name>Product-LineItem</ejb-relation-name>
        <ejb-relationship-role>
        	  <ejb-relationship-role-name>product-has-lineitems
        	  </ejb-relationship-role-name>
        	  <multiplicity>One</multiplicity>
        	  <relationship-role-source>
        	  <ejb-name>ProductEJB</ejb-name>
        	  </relationship-role-source>
        </ejb-relationship-role>
        </ejb-relation>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-relationship-role-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The ejb-relationship-role-name element defines a
            name for a role that is unique within an
            ejb-relation. Different relationships can use the
            same name for a role.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="multiplicity"
                   type="javaee:multiplicityType"/>
      <xsd:element name="cascade-delete"
                   type="javaee:emptyType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The cascade-delete element specifies that, within a
            particular relationship, the lifetime of one or more
            entity beans is dependent upon the lifetime of
            another entity bean. The cascade-delete element can
            only be specified for an ejb-relationship-role
            element contained in an ejb-relation element in
            which the other ejb-relationship-role
            element specifies a multiplicity of One.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="relationship-role-source"
                   type="javaee:relationship-role-sourceType"/>
      <xsd:element name="cmr-field"
                   type="javaee:cmr-fieldType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="enterprise-beansType">
    <xsd:annotation>
      <xsd:documentation>

        The enterprise-beansType declares one or more enterprise
        beans. Each bean can be a session, entity or message-driven
        bean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:choice maxOccurs="unbounded">
      <xsd:element name="session"
                   type="javaee:session-beanType">
        <xsd:unique name="session-ejb-local-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-ref-name element contains the name of
              an EJB reference. The EJB reference is an entry in
              the component's environment and is relative to the
              java:comp/env context.  The name must be unique within
              the component.
              
              It is recommended that name be prefixed with "ejb/".
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-local-ref"/>
          <xsd:field xpath="javaee:ejb-ref-name"/>
        </xsd:unique>
        <xsd:unique name="session-ejb-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-ref-name element contains the name of an EJB
              reference. The EJB reference is an entry in the
              component's environment and is relative to the
              java:comp/env context. The name must be unique
              within the component.
              
              It is recommended that name is prefixed with "ejb/".
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-ref"/>
          <xsd:field xpath="javaee:ejb-ref-name"/>
        </xsd:unique>
        <xsd:unique name="session-resource-env-ref-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The resource-env-ref-name element specifies the name
              of a resource environment reference; its value is
              the environment entry name used in the component
              code. The name is a JNDI name relative to the
              java:comp/env context and must be unique within an
              component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:resource-env-ref"/>
          <xsd:field xpath="javaee:resource-env-ref-name"/>
        </xsd:unique>
        <xsd:unique name="session-message-destination-ref-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The message-destination-ref-name element specifies the name
              of a message destination reference; its value is
              the message destination reference name used in the component
              code. The name is a JNDI name relative to the
              java:comp/env context and must be unique within an
              component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:message-destination-ref"/>
          <xsd:field xpath="javaee:message-destination-ref-name"/>
        </xsd:unique>
        <xsd:unique name="session-res-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The res-ref-name element specifies the name of a
              resource manager connection factory reference.  The name
              is a JNDI name relative to the java:comp/env context.
              The name must be unique within an component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:resource-ref"/>
          <xsd:field xpath="javaee:res-ref-name"/>
        </xsd:unique>
        <xsd:unique name="session-env-entry-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The env-entry-name element contains the name of a
              component's environment entry.  The name is a JNDI
              name relative to the java:comp/env context.  The
              name must be unique within an component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:env-entry"/>
          <xsd:field xpath="javaee:env-entry-name"/>
        </xsd:unique>
      </xsd:element>
      <xsd:element name="entity"
                   type="javaee:entity-beanType">
        <xsd:unique name="entity-ejb-local-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-ref-name element contains the name of
              an EJB reference. The EJB reference is an entry in
              the component's environment and is relative to the
              java:comp/env context.  The name must be unique within
              the component.
              
              It is recommended that name be prefixed with "ejb/".
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-local-ref"/>
          <xsd:field xpath="javaee:ejb-ref-name"/>
        </xsd:unique>
        <xsd:unique name="entity-ejb-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-ref-name element contains the name of an EJB
              reference. The EJB reference is an entry in the
              component's environment and is relative to the
              java:comp/env context. The name must be unique
              within the component.
              
              It is recommended that name is prefixed with "ejb/".
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-ref"/>
          <xsd:field xpath="javaee:ejb-ref-name"/>
        </xsd:unique>
        <xsd:unique name="entity-resource-env-ref-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The resource-env-ref-name element specifies the name
              of a resource environment reference; its value is
              the environment entry name used in the component
              code. The name is a JNDI name relative to the
              java:comp/env context and must be unique within an
              component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:resource-env-ref"/>
          <xsd:field xpath="javaee:resource-env-ref-name"/>
        </xsd:unique>
        <xsd:unique name="entity-message-destination-ref-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The message-destination-ref-name element specifies the name
              of a message destination reference; its value is
              the message destination reference name used in the component
              code. The name is a JNDI name relative to the
              java:comp/env context and must be unique within an
              component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:message-destination-ref"/>
          <xsd:field xpath="javaee:message-destination-ref-name"/>
        </xsd:unique>
        <xsd:unique name="entity-res-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The res-ref-name element specifies the name of a
              resource manager connection factory reference.  The name
              is a JNDI name relative to the java:comp/env context.
              The name must be unique within an component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:resource-ref"/>
          <xsd:field xpath="javaee:res-ref-name"/>
        </xsd:unique>
        <xsd:unique name="entity-env-entry-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The env-entry-name element contains the name of a
              component's environment entry.  The name is a JNDI
              name relative to the java:comp/env context.  The
              name must be unique within an component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:env-entry"/>
          <xsd:field xpath="javaee:env-entry-name"/>
        </xsd:unique>
      </xsd:element>
      <xsd:element name="message-driven"
                   type="javaee:message-driven-beanType">
        <xsd:unique name="messaged-ejb-local-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-ref-name element contains the name of
              an EJB reference. The EJB reference is an entry in
              the component's environment and is relative to the
              java:comp/env context.  The name must be unique within
              the component.
              
              It is recommended that name be prefixed with "ejb/".
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-local-ref"/>
          <xsd:field xpath="javaee:ejb-ref-name"/>
        </xsd:unique>
        <xsd:unique name="messaged-ejb-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-ref-name element contains the name of an EJB
              reference. The EJB reference is an entry in the
              component's environment and is relative to the
              java:comp/env context. The name must be unique
              within the component.
              
              It is recommended that name is prefixed with "ejb/".
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:ejb-ref"/>
          <xsd:field xpath="javaee:ejb-ref-name"/>
        </xsd:unique>
        <xsd:unique name="messaged-resource-env-ref-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The resource-env-ref-name element specifies the name
              of a resource environment reference; its value is
              the environment entry name used in the component
              code. The name is a JNDI name relative to the
              java:comp/env context and must be unique within an
              component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:resource-env-ref"/>
          <xsd:field xpath="javaee:resource-env-ref-name"/>
        </xsd:unique>
        <xsd:unique name="messaged-message-destination-ref-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The message-destination-ref-name element specifies the name
              of a message destination reference; its value is
              the message destination reference name used in the component
              code. The name is a JNDI name relative to the
              java:comp/env context and must be unique within an
              component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:message-destination-ref"/>
          <xsd:field xpath="javaee:message-destination-ref-name"/>
        </xsd:unique>
        <xsd:unique name="messaged-res-ref-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The res-ref-name element specifies the name of a
              resource manager connection factory reference.  The name
              is a JNDI name relative to the java:comp/env context.
              The name must be unique within an component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:resource-ref"/>
          <xsd:field xpath="javaee:res-ref-name"/>
        </xsd:unique>
        <xsd:unique name="messaged-env-entry-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The env-entry-name element contains the name of a
              component's environment entry.  The name is a JNDI
              name relative to the java:comp/env context.  The
              name must be unique within an component.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:env-entry"/>
          <xsd:field xpath="javaee:env-entry-name"/>
        </xsd:unique>
      </xsd:element>
    </xsd:choice>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="entity-beanType">
    <xsd:annotation>
      <xsd:documentation>

        The entity-beanType declares an entity bean. The declaration
        consists of:
        
        - an optional description
        - an optional display name
        - an optional icon element that contains a small and a large 
        icon file name
        - a unique name assigned to the enterprise bean
        in the deployment descriptor
        - an optional mapped-name element that can be used to provide
        vendor-specific deployment information such as the physical
        jndi-name of the entity bean's remote home interface. This 
        element is not required to be supported by all implementations.
        Any use of this element is non-portable.
        - the names of the entity bean's remote home 
        and remote interfaces, if any
        - the names of the entity bean's local home and local
        interfaces, if any
        - the entity bean's implementation class
        - the optional entity bean's persistence management type. If 
        this element is not specified it is defaulted to Container.
        - the entity bean's primary key class name
        - an indication of the entity bean's reentrancy
        - an optional specification of the 
        entity bean's cmp-version
        - an optional specification of the entity bean's
        abstract schema name
        - an optional list of container-managed fields
        - an optional specification of the primary key 
        field
        - an optional declaration of the bean's environment 
        entries
        - an optional declaration of the bean's EJB 
        references
        - an optional declaration of the bean's local 
        EJB references
        - an optional declaration of the bean's web 
        service references
        - an optional declaration of the security role 
        references
        - an optional declaration of the security identity
        to be used for the execution of the bean's methods
        - an optional declaration of the bean's 
        resource manager connection factory references
        - an optional declaration of the bean's
        resource environment references
        - an optional declaration of the bean's message 
        destination references
        - an optional set of query declarations
        for finder and select methods for an entity
        bean with cmp-version 2.x.
        
        The optional abstract-schema-name element must be specified
        for an entity bean with container-managed persistence and
        cmp-version 2.x.
        
        The optional primkey-field may be present in the descriptor
        if the entity's persistence-type is Container.
        
        The optional cmp-version element may be present in the
        descriptor if the entity's persistence-type is Container. If
        the persistence-type is Container and the cmp-version
        element is not specified, its value defaults to 2.x.
        
        The optional home and remote elements must be specified if
        the entity bean cmp-version is 1.x.
        
        The optional home and remote elements must be specified if
        the entity bean has a remote home and remote interface.
        
        The optional local-home and local elements must be specified
        if the entity bean has a local home and local interface.
        
        Either both the local-home and the local elements or both
        the home and the remote elements must be specified.
        
        The optional query elements must be present if the
        persistence-type is Container and the cmp-version is 2.x and
        query methods other than findByPrimaryKey have been defined
        for the entity bean.
        
        The other elements that are optional are "optional" in the
        sense that they are omitted if the lists represented by them
        are empty.
        
        At least one cmp-field element must be present in the
        descriptor if the entity's persistence-type is Container and
        the cmp-version is 1.x, and none must not be present if the
        entity's persistence-type is Bean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="ejb-name"
                   type="javaee:ejb-nameType"/>
      <xsd:element name="mapped-name"
                   type="javaee:xsdStringType"
                   minOccurs="0"/>
      <xsd:element name="home"
                   type="javaee:homeType"
                   minOccurs="0"/>
      <xsd:element name="remote"
                   type="javaee:remoteType"
                   minOccurs="0"/>
      <xsd:element name="local-home"
                   type="javaee:local-homeType"
                   minOccurs="0"/>
      <xsd:element name="local"
                   type="javaee:localType"
                   minOccurs="0"/>
      <xsd:element name="ejb-class"
                   type="javaee:ejb-classType"/>
      <xsd:element name="persistence-type"
                   type="javaee:persistence-typeType"/>
      <xsd:element name="prim-key-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>

            The prim-key-class element contains the
            fully-qualified name of an
            entity bean's primary key class.
            
            If the definition of the primary key class is
            deferred to deployment time, the prim-key-class 
            element should specify java.lang.Object.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="reentrant"
                   type="javaee:true-falseType">
        <xsd:annotation>
          <xsd:documentation>

            The reentrant element specifies whether an entity
            bean is reentrant or not.
            
            The reentrant element must be one of the two
            following: true or false
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="cmp-version"
                   type="javaee:cmp-versionType"
                   minOccurs="0"/>
      <xsd:element name="abstract-schema-name"
                   type="javaee:java-identifierType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The abstract-schema-name element specifies the name
            of the abstract schema type of an entity bean with 
            cmp-version 2.x. It is used in EJB QL queries. 
            
            For example, the abstract-schema-name for an entity 
            bean whose local interface is 
            com.acme.commerce.Order might be Order. 
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="cmp-field"
                   type="javaee:cmp-fieldType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="primkey-field"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The primkey-field element is used to specify the
            name of the primary key field for an entity with
            container-managed persistence.
            
            The primkey-field must be one of the fields declared
            in the cmp-field element, and the type of the field
            must be the same as the primary key type.
            
            The primkey-field element is not used if the primary
            key maps to multiple container-managed fields
            (i.e. the key is a compound key). In this case, the
            fields of the primary key class must be public, and
            their names must correspond to the field names of
            the entity bean class that comprise the key.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:group ref="javaee:jndiEnvironmentRefsGroup"/>
      <xsd:element name="security-role-ref"
                   type="javaee:security-role-refType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="security-identity"
                   type="javaee:security-identityType"
                   minOccurs="0"/>
      <xsd:element name="query"
                   type="javaee:queryType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="exclude-listType">
    <xsd:annotation>
      <xsd:documentation>

        The exclude-listType specifies one or more methods which
        the Assembler marks to be uncallable.
        
        If the method permission relation contains methods that are
        in the exclude list, the Deployer should consider those
        methods to be uncallable.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="method"
                   type="javaee:methodType"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="application-exceptionType">
    <xsd:annotation>
      <xsd:documentation>

        The application-exceptionType declares an application
        exception. The declaration consists of:
        
        - the exception class. When the container receives
        an exception of this type, it is required to 
        forward this exception as an applcation exception 
        to the client regardless of whether it is a checked
        or unchecked exception.
        - an optional rollback element. If this element is 
        set to true, the container must rollback the current 
        transaction before forwarding the exception to the
        client.  If not specified, it defaults to false.
        - an optional inherited element. If this element is 
        set to true, subclasses of the exception class type
        are also automatically considered application 
        exceptions (unless overriden at a lower level).
        If set to false, only the exception class type is
        considered an application-exception, not its
        exception subclasses. If not specified, this
        value defaults to true.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="exception-class"
                   type="javaee:fully-qualified-classType"/>
      <xsd:element name="rollback"
                   type="javaee:true-falseType"
                   minOccurs="0"/>
      <xsd:element name="inherited"
                   type="javaee:true-falseType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="interceptorsType">
    <xsd:annotation>
      <xsd:documentation>

        The interceptorsType element declares one or more interceptor
        classes used by components within this ejb-jar or .war.  The declaration
        consists of :
        
        - An optional description.
        - One or more interceptor elements.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="interceptor"
                   type="javaee:interceptorType"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="interceptorType">
    <xsd:annotation>
      <xsd:documentation>

        The interceptorType element declares information about a single
        interceptor class.  It consists of :
        
        - An optional description.
        - The fully-qualified name of the interceptor class.
        - An optional list of around invoke methods declared on the
        interceptor class and/or its super-classes.
        - An optional list of around timeout methods declared on the
        interceptor class and/or its super-classes.
        - An optional list environment dependencies for the interceptor
        class and/or its super-classes.
        - An optional list of post-activate methods declared on the
        interceptor class and/or its super-classes.
        - An optional list of pre-passivate methods declared on the
        interceptor class and/or its super-classes.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="interceptor-class"
                   type="javaee:fully-qualified-classType"/>
      <xsd:element name="around-invoke"
                   type="javaee:around-invokeType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="around-timeout"
                   type="javaee:around-timeoutType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:group ref="javaee:jndiEnvironmentRefsGroup"/>
      <xsd:element name="post-activate"
                   type="javaee:lifecycle-callbackType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="pre-passivate"
                   type="javaee:lifecycle-callbackType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="interceptor-bindingType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The interceptor-bindingType element describes the binding of
        interceptor classes to beans within the ejb-jar or .war.
        It consists of :
        
        - An optional description.
        - The name of an ejb within the module or the wildcard value "*",
        which is used to define interceptors that are bound to all
        beans in the ejb-jar or .war.
        - A list of interceptor classes that are bound to the contents of
        the ejb-name element or a specification of the total ordering
        over the interceptors defined for the given level and above.
        - An optional exclude-default-interceptors element.  If set to true,
        specifies that default interceptors are not to be applied to 
        a bean-class and/or business method.
        - An optional exclude-class-interceptors element.  If set to true,
        specifies that class interceptors are not to be applied to 
        a business method.
        - An optional set of method elements for describing the name/params
        of a method-level interceptor.
        
        Interceptors bound to all classes using the wildcard syntax
        "*" are default interceptors for the components in the ejb-jar or .war. 
        In addition, interceptors may be bound at the level of the bean
        class (class-level interceptors) or business methods (method-level
        interceptors ).
        
        The binding of interceptors to classes is additive.  If interceptors
        are bound at the class-level and/or default-level as well as the
        method-level, both class-level and/or default-level as well as
        method-level will apply. 
        
        There are four possible styles of the interceptor element syntax :
        
        1.
        <interceptor-binding>
        <ejb-name>*</ejb-name>
        <interceptor-class>INTERCEPTOR</interceptor-class>
        </interceptor-binding>
        
        Specifying the ejb-name as the wildcard value "*" designates
        default interceptors (interceptors that apply to all session and
        message-driven beans contained in the ejb-jar or .war).
        
        2. 
        <interceptor-binding>
        <ejb-name>EJBNAME</ejb-name>
        <interceptor-class>INTERCEPTOR</interceptor-class>
        </interceptor-binding>
        
        This style is used to refer to interceptors associated with the
        specified enterprise bean(class-level interceptors).
        
        3. 
        <interceptor-binding>
        <ejb-name>EJBNAME</ejb-name>
        <interceptor-class>INTERCEPTOR</interceptor-class>
        <method>
        <method-name>METHOD</method-name>
        </method>
        </interceptor-binding>
        
        This style is used to associate a method-level interceptor with 
        the specified enterprise bean.  If there are multiple methods
        with the same overloaded name, the element of this style refers
        to all the methods with the overloaded name.  Method-level
        interceptors can only be associated with business methods of the
        bean class.   Note that the wildcard value "*" cannot be used
        to specify method-level interceptors.
        
        4. 
        <interceptor-binding>
        <ejb-name>EJBNAME</ejb-name>
        <interceptor-class>INTERCEPTOR</interceptor-class>
        <method>
        <method-name>METHOD</method-name>
        <method-params>
        <method-param>PARAM-1</method-param>
        <method-param>PARAM-2</method-param>
        ...
        <method-param>PARAM-N</method-param>
        </method-params>
        </method>
        </interceptor-binding>
        
        This style is used to associate a method-level interceptor with 
        the specified method of the specified enterprise bean.  This 
        style is used to refer to a single method within a set of methods
        with an overloaded name.  The values PARAM-1 through PARAM-N
        are the fully-qualified Java types of the method's input parameters
        (if the method has no input arguments, the method-params element
        contains no method-param elements). Arrays are specified by the
        array element's type, followed by one or more pair of square 
        brackets (e.g. int[][]).
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-name"
                   type="javaee:string"/>
      <xsd:choice>
        <xsd:element name="interceptor-class"
                     type="javaee:fully-qualified-classType"
                     minOccurs="0"
                     maxOccurs="unbounded"/>
        <xsd:element name="interceptor-order"
                     type="javaee:interceptor-orderType"
                     minOccurs="1"/>
      </xsd:choice>
      <xsd:element name="exclude-default-interceptors"
                   type="javaee:true-falseType"
                   minOccurs="0"/>
      <xsd:element name="exclude-class-interceptors"
                   type="javaee:true-falseType"
                   minOccurs="0"/>
      <xsd:element name="method"
                   type="javaee:named-methodType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="interceptor-orderType">
    <xsd:annotation>
      <xsd:documentation>

        The interceptor-orderType element describes a total ordering
        of interceptor classes.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="interceptor-class"
                   type="javaee:fully-qualified-classType"
                   minOccurs="1"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="named-methodType">
    <xsd:sequence>
      <xsd:element name="method-name"
                   type="javaee:string"/>
      <xsd:element name="method-params"
                   type="javaee:method-paramsType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="init-methodType">
    <xsd:sequence>
      <xsd:element name="create-method"
                   type="javaee:named-methodType"/>
      <xsd:element name="bean-method"
                   type="javaee:named-methodType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="remove-methodType">
    <xsd:sequence>
      <xsd:element name="bean-method"
                   type="javaee:named-methodType"/>
      <xsd:element name="retain-if-exception"
                   type="javaee:true-falseType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="message-driven-beanType">
    <xsd:annotation>
      <xsd:documentation>

        The message-driven element declares a message-driven
        bean. The declaration consists of:
        
        - an optional description
        - an optional display name
        - an optional icon element that contains a small and a large 
        icon file name. 
        - a name assigned to the enterprise bean in
        the deployment descriptor
        - an optional mapped-name element that can be used to provide
        vendor-specific deployment information such as the physical
        jndi-name of destination from which this message-driven bean
        should consume.  This element is not required to be supported 
        by all implementations.  Any use of this element is non-portable.
        - the message-driven bean's implementation class
        - an optional declaration of the bean's messaging 
        type 
        - an optional declaration of the bean's timeout method for
        handling programmatically created timers
        - an optional declaration of timers to be automatically created at
        deployment time
        - the optional message-driven bean's transaction management 
        type. If it is not defined, it is defaulted to Container.
        - an optional declaration of the bean's 
        message-destination-type
        - an optional declaration of the bean's 
        message-destination-link
        - an optional declaration of the message-driven bean's
        activation configuration properties
        - an optional list of the message-driven bean class and/or
        superclass around-invoke methods.
        - an optional list of the message-driven bean class and/or
        superclass around-timeout methods.
        - an optional declaration of the bean's environment
        entries
        - an optional declaration of the bean's EJB references
        - an optional declaration of the bean's local EJB
        references
        - an optional declaration of the bean's web service
        references
        - an optional declaration of the security role 
        references
        - an optional declaration of the security
        identity to be used for the execution of the bean's
        methods
        - an optional declaration of the bean's 
        resource manager connection factory 
        references
        - an optional declaration of the bean's resource
        environment references.
        - an optional declaration of the bean's message 
        destination references
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="ejb-name"
                   type="javaee:ejb-nameType"/>
      <xsd:element name="mapped-name"
                   type="javaee:xsdStringType"
                   minOccurs="0"/>
      <xsd:element name="ejb-class"
                   type="javaee:ejb-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The ejb-class element specifies the fully qualified name
            of the bean class for this ejb.  It is required unless
            there is a component-defining annotation for the same
            ejb-name.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="messaging-type"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The messaging-type element specifies the message
            listener interface of the message-driven bean. 
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="timeout-method"
                   type="javaee:named-methodType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The timeout-method element specifies the method that
            will receive callbacks for programmatically
            created timers.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="timer"
                   type="javaee:timerType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="transaction-type"
                   type="javaee:transaction-typeType"
                   minOccurs="0"/>
      <xsd:element name="message-destination-type"
                   type="javaee:message-destination-typeType"
                   minOccurs="0"/>
      <xsd:element name="message-destination-link"
                   type="javaee:message-destination-linkType"
                   minOccurs="0"/>
      <xsd:element name="activation-config"
                   type="javaee:activation-configType"
                   minOccurs="0"/>
      <xsd:element name="around-invoke"
                   type="javaee:around-invokeType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="around-timeout"
                   type="javaee:around-timeoutType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:group ref="javaee:jndiEnvironmentRefsGroup"/>
      <xsd:element name="security-role-ref"
                   type="javaee:security-role-refType"
                   minOccurs="0"
                   maxOccurs="unbounded">
      </xsd:element>
      <xsd:element name="security-identity"
                   type="javaee:security-identityType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="methodType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The methodType is used to denote a method of an enterprise
        bean's business, home, component, and/or web service endpoint
        interface, or, in the case of a message-driven bean, the
        bean's message listener method, or a set of such
        methods. The ejb-name element must be the name of one of the
        enterprise beans declared in the deployment descriptor; the
        optional method-intf element allows to distinguish between a
        method with the same signature that is multiply defined
        across the business, home, component, and/or web service 
        endpoint nterfaces; the method-name element specifies the 
        method name; and the optional method-params elements identify 
        a single method among multiple methods with an overloaded
        method name.
        
        There are three possible styles of using methodType element
        within a method element:
        
        1.
        <method>
        <ejb-name>EJBNAME</ejb-name>
        <method-name>*</method-name>
        </method>
        
        This style is used to refer to all the methods of the
        specified enterprise bean's business, home, component, 
        and/or web service endpoint interfaces.
        
        2.
        <method>
        <ejb-name>EJBNAME</ejb-name>
        <method-name>METHOD</method-name>
        </method>
        
        This style is used to refer to the specified method of
        the specified enterprise bean. If there are multiple
        methods with the same overloaded name, the element of
        this style refers to all the methods with the overloaded
        name.
        
        3.
        <method>
        <ejb-name>EJBNAME</ejb-name>
        <method-name>METHOD</method-name>
        <method-params>
        	  <method-param>PARAM-1</method-param>
        	  <method-param>PARAM-2</method-param>
        	  ...
        	  <method-param>PARAM-n</method-param>
        </method-params>
        </method>
        
        This style is used to refer to a single method within a
        set of methods with an overloaded name. PARAM-1 through
        PARAM-n are the fully-qualified Java types of the
        method's input parameters (if the method has no input
        arguments, the method-params element contains no
        method-param elements). Arrays are specified by the
        array element's type, followed by one or more pair of
        square brackets (e.g. int[][]). If there are multiple
        methods with the same overloaded name, this style refers
        to all of the overloaded methods. 
        
        Examples:
        
        Style 1: The following method element refers to all the
        methods of the EmployeeService bean's business, home, 
        component, and/or web service endpoint interfaces:
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-name>*</method-name>
        </method>
        
        Style 2: The following method element refers to all the
        create methods of the EmployeeService bean's home
        interface(s).
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-name>create</method-name>
        </method>
        
        Style 3: The following method element refers to the
        create(String firstName, String LastName) method of the
        EmployeeService bean's home interface(s).
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-name>create</method-name>
        <method-params>
        	  <method-param>java.lang.String</method-param>
        	  <method-param>java.lang.String</method-param>
        </method-params>
        </method>
        
        The following example illustrates a Style 3 element with
        more complex parameter types. The method 
        foobar(char s, int i, int[] iar, mypackage.MyClass mycl, 
        mypackage.MyClass[][] myclaar) would be specified as:
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-name>foobar</method-name>
        <method-params>
        	  <method-param>char</method-param>
        	  <method-param>int</method-param>
        	  <method-param>int[]</method-param>
        	  <method-param>mypackage.MyClass</method-param>
        	  <method-param>mypackage.MyClass[][]</method-param>
        </method-params>
        </method>
        
        The optional method-intf element can be used when it becomes
        necessary to differentiate between a method that is multiply
        defined across the enterprise bean's business, home, component,
        and/or web service endpoint interfaces with the same name and
        signature. However, if the same method is a method of both the
        local business interface, and the local component interface, 
        the same attribute applies to the method for both interfaces.
        Likewise, if the same method is a method of both the remote 
        business interface and the remote component interface, the same
        attribute applies to the method for both interfaces.
        
        For example, the method element
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-intf>Remote</method-intf>
        <method-name>create</method-name>
        <method-params>
        	  <method-param>java.lang.String</method-param>
        	  <method-param>java.lang.String</method-param>
        </method-params>
        </method>
        
        can be used to differentiate the create(String, String)
        method defined in the remote interface from the
        create(String, String) method defined in the remote home
        interface, which would be defined as
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-intf>Home</method-intf>
        <method-name>create</method-name>
        <method-params>
        	  <method-param>java.lang.String</method-param>
        	  <method-param>java.lang.String</method-param>
        </method-params>
        </method>
        
        and the create method that is defined in the local home
        interface which would be defined as
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-intf>LocalHome</method-intf>
        <method-name>create</method-name>
        <method-params>
        	  <method-param>java.lang.String</method-param>
        	  <method-param>java.lang.String</method-param>
        </method-params>
        </method>
        
        The method-intf element can be used with all three Styles
        of the method element usage. For example, the following
        method element example could be used to refer to all the
        methods of the EmployeeService bean's remote home interface
        and the remote business interface.
        
        <method>
        <ejb-name>EmployeeService</ejb-name>
        <method-intf>Home</method-intf>
        <method-name>*</method-name>
        </method>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-name"
                   type="javaee:ejb-nameType"/>
      <xsd:element name="method-intf"
                   type="javaee:method-intfType"
                   minOccurs="0">
      </xsd:element>
      <xsd:element name="method-name"
                   type="javaee:method-nameType"/>
      <xsd:element name="method-params"
                   type="javaee:method-paramsType"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="method-intfType">
    <xsd:annotation>
      <xsd:documentation>

        The method-intf element allows a method element to
        differentiate between the methods with the same name and
        signature that are multiply defined across the home and
        component interfaces (e.g, in both an enterprise bean's
        remote and local interfaces or in both an enterprise bean's
        home and remote interfaces, etc.); the component and web
        service endpoint interfaces, and so on. 
        
        Local applies to the local component interface, local business 
        interfaces, and the no-interface view. 
        
        Remote applies to both remote component interface and the remote 
        business interfaces.  
        
        ServiceEndpoint refers to methods exposed through a web service
        endpoint.
        
        Timer refers to the bean's timeout callback methods.
        
        MessageEndpoint refers to the methods of a message-driven bean's
        message-listener interface.
        
        The method-intf element must be one of the following:
        
        Home
        Remote
        LocalHome
        Local
        ServiceEndpoint
        Timer
        MessageEndpoint
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Home"/>
        <xsd:enumeration value="Remote"/>
        <xsd:enumeration value="LocalHome"/>
        <xsd:enumeration value="Local"/>
        <xsd:enumeration value="ServiceEndpoint"/>
        <xsd:enumeration value="Timer"/>
        <xsd:enumeration value="MessageEndpoint"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="method-nameType">
    <xsd:annotation>
      <xsd:documentation>

        The method-nameType contains a name of an enterprise
        bean method or the asterisk (*) character. The asterisk is
        used when the element denotes all the methods of an
        enterprise bean's client view interfaces.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="method-paramsType">
    <xsd:annotation>
      <xsd:documentation>

        The method-paramsType defines a list of the
        fully-qualified Java type names of the method parameters.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="method-param"
                   type="javaee:java-typeType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            The method-param element contains a primitive
            or a fully-qualified Java type name of a method
            parameter.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="method-permissionType">
    <xsd:annotation>
      <xsd:documentation>

        The method-permissionType specifies that one or more
        security roles are allowed to invoke one or more enterprise
        bean methods. The method-permissionType consists of an
        optional description, a list of security role names or an
        indicator to state that the method is unchecked for
        authorization, and a list of method elements.
        
        The security roles used in the method-permissionType
        must be defined in the security-role elements of the
        deployment descriptor, and the methods must be methods
        defined in the enterprise bean's business, home, component 
        and/or web service endpoint interfaces.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:choice>
        <xsd:element name="role-name"
                     type="javaee:role-nameType"
                     maxOccurs="unbounded"/>
        <xsd:element name="unchecked"
                     type="javaee:emptyType">
          <xsd:annotation>
            <xsd:documentation>

              The unchecked element specifies that a method is
              not checked for authorization by the container
              prior to invocation of the method.
              
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
      </xsd:choice>
      <xsd:element name="method"
                   type="javaee:methodType"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="multiplicityType">
    <xsd:annotation>
      <xsd:documentation>

        The multiplicityType describes the multiplicity of the
        role that participates in a relation.
        
        The value must be one of the two following:
        
        One
        Many
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="One"/>
        <xsd:enumeration value="Many"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="persistence-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The persistence-typeType specifies an entity bean's persistence
        management type.
        
        The persistence-type element must be one of the two following:
        
        Bean
        Container
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Bean"/>
        <xsd:enumeration value="Container"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="queryType">
    <xsd:annotation>
      <xsd:documentation>

        The queryType defines a finder or select
        query. It contains
        - an optional description of the query
        - the specification of the finder or select
        method it is used by
        	- an optional specification of the result type 
        	  mapping, if the query is for a select method 
        	  and entity objects are returned.
        	- the EJB QL query string that defines the query.
        
        Queries that are expressible in EJB QL must use the ejb-ql
        element to specify the query. If a query is not expressible
        in EJB QL, the description element should be used to
        describe the semantics of the query and the ejb-ql element
        should be empty.
        
        The result-type-mapping is an optional element. It can only
        be present if the query-method specifies a select method
        that returns entity objects.  The default value for the
        result-type-mapping element is "Local".
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"/>
      <xsd:element name="query-method"
                   type="javaee:query-methodType"/>
      <xsd:element name="result-type-mapping"
                   type="javaee:result-type-mappingType"
                   minOccurs="0"/>
      <xsd:element name="ejb-ql"
                   type="javaee:xsdStringType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="query-methodType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The query-method specifies the method for a finder or select
        query.
        
        The method-name element specifies the name of a finder or select
        method in the entity bean's implementation class.
        
        Each method-param must be defined for a query-method using the
        method-params element.
        
        It is used by the query-method element. 
        
        Example:
        
        <query>
        <description>Method finds large orders</description>
        <query-method>
        	  <method-name>findLargeOrders</method-name>
        	  <method-params></method-params>
        </query-method>
        <ejb-ql>
        	SELECT OBJECT(o) FROM Order o
        	  WHERE o.amount &gt; 1000
        </ejb-ql>
        </query>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="method-name"
                   type="javaee:method-nameType"/>
      <xsd:element name="method-params"
                   type="javaee:method-paramsType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="relationship-role-sourceType">
    <xsd:annotation>
      <xsd:documentation>

        The relationship-role-sourceType designates the source of a
        role that participates in a relationship. A
        relationship-role-sourceType is used by
        relationship-role-source elements to uniquely identify an
        entity bean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-name"
                   type="javaee:ejb-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="relationshipsType">
    <xsd:annotation>
      <xsd:documentation>

        The relationshipsType describes the relationships in
        which entity beans with container-managed persistence
        participate. The relationshipsType contains an optional
        description; and a list of ejb-relation elements, which
        specify the container managed relationships.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="ejb-relation"
                   type="javaee:ejb-relationType"
                   maxOccurs="unbounded">
        <xsd:unique name="role-name-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The ejb-relationship-role-name contains the name of a
              relationship role. The name must be unique within 
              a relationship, but can be reused in different
              relationships.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath=".//javaee:ejb-relationship-role-name"/>
          <xsd:field xpath="."/>
        </xsd:unique>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="result-type-mappingType">
    <xsd:annotation>
      <xsd:documentation>

        The result-type-mappingType is used in the query element to
        specify whether an abstract schema type returned by a query
        for a select method is to be mapped to an EJBLocalObject or
        EJBObject type.
        
        The value must be one of the following:
        
        Local
        Remote
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Local"/>
        <xsd:enumeration value="Remote"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="security-identityType">
    <xsd:annotation>
      <xsd:documentation>

        The security-identityType specifies whether the caller's
        security identity is to be used for the execution of the
        methods of the enterprise bean or whether a specific run-as
        identity is to be used. It contains an optional description
        and a specification of the security identity to be used.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:choice>
        <xsd:element name="use-caller-identity"
                     type="javaee:emptyType">
          <xsd:annotation>
            <xsd:documentation>

              The use-caller-identity element specifies that
              the caller's security identity be used as the
              security identity for the execution of the
              enterprise bean's methods.
              
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="run-as"
                     type="javaee:run-asType"/>
      </xsd:choice>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="session-beanType">
    <xsd:annotation>
      <xsd:documentation>

        The session-beanType declares an session bean. The
        declaration consists of:
        
        - an optional description
        - an optional display name
        - an optional icon element that contains a small and a large 
        icon file name
        - a name assigned to the enterprise bean
        in the deployment description
        - an optional mapped-name element that can be used to provide
        vendor-specific deployment information such as the physical
        jndi-name of the session bean's remote home/business interface. 
        This element is not required to be supported by all 
        implementations. Any use of this element is non-portable.
        - the names of all the remote or local business interfaces, 
        if any
        - the names of the session bean's remote home and
        remote interfaces, if any
        - the names of the session bean's local home and
        local interfaces, if any
        - an optional declaration that this bean exposes a
        no-interface view
        - the name of the session bean's web service endpoint
        interface, if any
        - the session bean's implementation class
        - the session bean's state management type
        - an optional declaration of a stateful session bean's timeout value
        - an optional declaration of the session bean's timeout method for
        handling programmatically created timers
        - an optional declaration of timers to be automatically created at
        deployment time
        - an optional declaration that a Singleton bean has eager
        initialization
        - an optional declaration of a Singleton/Stateful bean's concurrency 
        management type
        - an optional declaration of the method locking metadata
        for a Singleton with container managed concurrency
        - an optional declaration of the other Singleton beans in the
        application that must be initialized before this bean
        - an optional declaration of the session bean's asynchronous 
        methods
        - the optional session bean's transaction management type. 
        If it is not present, it is defaulted to Container.
        - an optional declaration of a stateful session bean's 
        afterBegin, beforeCompletion, and/or afterCompletion methods
        - an optional list of the session bean class and/or
        superclass around-invoke methods.
        - an optional list of the session bean class and/or
        superclass around-timeout methods.
        - an optional declaration of the bean's 
        environment entries
        - an optional declaration of the bean's EJB references
        - an optional declaration of the bean's local 
        EJB references
        - an optional declaration of the bean's web 
        service references
        - an optional declaration of the security role 
        references
        - an optional declaration of the security identity 
        to be used for the execution of the bean's methods
        - an optional declaration of the bean's resource 
        manager connection factory references
        - an optional declaration of the bean's resource 
        environment references.
        - an optional declaration of the bean's message 
        destination references
        
        The elements that are optional are "optional" in the sense
        that they are omitted when if lists represented by them are
        empty.
        
        The service-endpoint element may only be specified if the
        bean is a stateless session bean.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="ejb-name"
                   type="javaee:ejb-nameType"/>
      <xsd:element name="mapped-name"
                   type="javaee:xsdStringType"
                   minOccurs="0"/>
      <xsd:element name="home"
                   type="javaee:homeType"
                   minOccurs="0"/>
      <xsd:element name="remote"
                   type="javaee:remoteType"
                   minOccurs="0"/>
      <xsd:element name="local-home"
                   type="javaee:local-homeType"
                   minOccurs="0"/>
      <xsd:element name="local"
                   type="javaee:localType"
                   minOccurs="0"/>
      <xsd:element name="business-local"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="business-remote"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="local-bean"
                   type="javaee:emptyType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The local-bean element declares that this
            session bean exposes a no-interface Local client view.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="service-endpoint"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The service-endpoint element contains the
            fully-qualified name of the enterprise bean's web
            service endpoint interface. The service-endpoint
            element may only be specified for a stateless
            session bean. The specified interface must be a
            valid JAX-RPC service endpoint interface.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="ejb-class"
                   type="javaee:ejb-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The ejb-class element specifies the fully qualified name
            of the bean class for this ejb.  It is required unless
            there is a component-defining annotation for the same
            ejb-name.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="session-type"
                   type="javaee:session-typeType"
                   minOccurs="0"/>
      <xsd:element name="stateful-timeout"
                   type="javaee:stateful-timeoutType"
                   minOccurs="0"/>
      <xsd:element name="timeout-method"
                   type="javaee:named-methodType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The timeout-method element specifies the method that
            will receive callbacks for programmatically
            created timers.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="timer"
                   type="javaee:timerType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="init-on-startup"
                   type="javaee:true-falseType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The init-on-startup element specifies that a Singleton
            bean has eager initialization.
            This element can only be specified for singleton session
            beans.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="concurrency-management-type"
                   type="javaee:concurrency-management-typeType"
                   minOccurs="0"/>
      <xsd:element name="concurrent-method"
                   type="javaee:concurrent-methodType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="depends-on"
                   type="javaee:depends-onType"
                   minOccurs="0"/>
      <xsd:element name="init-method"
                   type="javaee:init-methodType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            The init-method element specifies the mappings for
            EJB 2.x style create methods for an EJB 3.x bean.
            This element can only be specified for stateful 
            session beans. 
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="remove-method"
                   type="javaee:remove-methodType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            The remove-method element specifies the mappings for
            EJB 2.x style remove methods for an EJB 3.x bean.
            This element can only be specified for stateful 
            session beans. 
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="async-method"
                   type="javaee:async-methodType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="transaction-type"
                   type="javaee:transaction-typeType"
                   minOccurs="0"/>
      <xsd:element name="after-begin-method"
                   type="javaee:named-methodType"
                   minOccurs="0"/>
      <xsd:element name="before-completion-method"
                   type="javaee:named-methodType"
                   minOccurs="0"/>
      <xsd:element name="after-completion-method"
                   type="javaee:named-methodType"
                   minOccurs="0"/>
      <xsd:element name="around-invoke"
                   type="javaee:around-invokeType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="around-timeout"
                   type="javaee:around-timeoutType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:group ref="javaee:jndiEnvironmentRefsGroup"/>
      <xsd:element name="post-activate"
                   type="javaee:lifecycle-callbackType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="pre-passivate"
                   type="javaee:lifecycle-callbackType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="security-role-ref"
                   type="javaee:security-role-refType"
                   minOccurs="0"
                   maxOccurs="unbounded">
      </xsd:element>
      <xsd:element name="security-identity"
                   type="javaee:security-identityType"
                   minOccurs="0">
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="session-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The session-typeType describes whether the session bean is a
        singleton, stateful or stateless session. It is used by
        session-type elements.
        
        The value must be one of the three following:
        
        Singleton
        Stateful
        Stateless
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Singleton"/>
        <xsd:enumeration value="Stateful"/>
        <xsd:enumeration value="Stateless"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="stateful-timeoutType">
    <xsd:annotation>
      <xsd:documentation>

        The stateful-timeoutType represents the amount of time
        a stateful session bean can be idle(not receive any client
        invocations) before it is eligible for removal by the container.
        
        A timeout value of 0 means the bean is immediately eligible for removal.
        
        A timeout value of -1 means the bean will never be removed due to timeout.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="timeout"
                   type="javaee:xsdIntegerType"/>
      <xsd:element name="unit"
                   type="javaee:time-unit-typeType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="time-unit-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The time-unit-typeType represents a time duration at a given
        unit of granularity.  
        
        The time unit type must be one of the following :
        
        Days
        Hours
        Minutes
        Seconds
        Milliseconds
        Microseconds
        Nanoseconds
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Days"/>
        <xsd:enumeration value="Hours"/>
        <xsd:enumeration value="Minutes"/>
        <xsd:enumeration value="Seconds"/>
        <xsd:enumeration value="Milliseconds"/>
        <xsd:enumeration value="Microseconds"/>
        <xsd:enumeration value="Nanoseconds"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="timer-scheduleType">
    <xsd:sequence>
      <xsd:element name="second"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="minute"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="hour"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="day-of-month"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="month"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="day-of-week"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="year"
                   type="javaee:string"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="timerType">
    <xsd:annotation>
      <xsd:documentation>

        The timerType specifies an enterprise bean timer.  Each
        timer is automatically created by the container upon
        deployment.  Timer callbacks occur based on the 
        schedule attributes.  All callbacks are made to the
        timeout-method associated with the timer.  
        
        A timer can have an optional start and/or end date. If
        a start date is specified, it takes precedence over the
        associated timer schedule such that any matching
        expirations prior to the start time will not occur.
        Likewise, no matching expirations will occur after any
        end date.   Start/End dates are specified using the
        XML Schema dateTime type, which follows the ISO-8601
        standard for date(and optional time-within-the-day) 
        representation.
        
        An optional flag can be used to control whether
        this timer has persistent(true) delivery semantics or
        non-persistent(false) delivery semantics.  If not specified,
        the value defaults to persistent(true).
        
        A time zone can optionally be associated with a timer.
        If specified, the timer's schedule is evaluated in the context
        of that time zone, regardless of the default time zone in which
        the container is executing.   Time zones are specified as an
        ID string.  The set of required time zone IDs is defined by
        the Zone Name(TZ) column of the public domain zoneinfo database.
        
        An optional info string can be assigned to the timer and 
        retrieved at runtime through the Timer.getInfo() method.
        
        The timerType can only be specified on stateless session
        beans, singleton session beans, and message-driven beans.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="schedule"
                   type="javaee:timer-scheduleType"/>
      <xsd:element name="start"
                   type="xsd:dateTime"
                   minOccurs="0"/>
      <xsd:element name="end"
                   type="xsd:dateTime"
                   minOccurs="0"/>
      <xsd:element name="timeout-method"
                   type="javaee:named-methodType"/>
      <xsd:element name="persistent"
                   type="javaee:true-falseType"
                   minOccurs="0"/>
      <xsd:element name="timezone"
                   type="javaee:string"
                   minOccurs="0"/>
      <xsd:element name="info"
                   type="javaee:string"
                   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="trans-attributeType">
    <xsd:annotation>
      <xsd:documentation>

        The trans-attributeType specifies how the container must
        manage the transaction boundaries when delegating a method 
        invocation to an enterprise bean's business method. 
        
        The value must be one of the following: 
        
        NotSupported 
        Supports 
        Required  
        RequiresNew 
        Mandatory 
        Never 
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="NotSupported"/>
        <xsd:enumeration value="Supports"/>
        <xsd:enumeration value="Required"/>
        <xsd:enumeration value="RequiresNew"/>
        <xsd:enumeration value="Mandatory"/>
        <xsd:enumeration value="Never"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="transaction-typeType">
    <xsd:annotation>
      <xsd:documentation>

        The transaction-typeType specifies an enterprise bean's
        transaction management type.
        
        The transaction-type must be one of the two following:
        
        Bean
        Container
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="Bean"/>
        <xsd:enumeration value="Container"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

</xsd:schema>