bundles/org.eclipse.jst.standard.schemas/dtdsAndSchemas/connector_1_0.dtd - sourceediting/webtools.sourceediting - Git at Google

 <!--
 Copyright 2000-2001 Sun Microsystems, Inc. 901 San Antonio Road,
 Palo Alto, CA  94303, U.S.A.  All rights reserved.

 This product or document is protected by copyright and distributed
 under licenses restricting its use, copying, distribution, and
 decompilation.  No part of this product or documentation may be
 reproduced in any form by any means without prior written authorization
 of Sun and its licensors, if any.

 Third party software, including font technology, is copyrighted and
 licensed from Sun suppliers.

 Sun, Sun Microsystems, the Sun Logo, Solaris, Java, JavaServer Pages, Java
 Naming and Directory Interface, JDBC, JDK, JavaMail and Enterprise JavaBeans,
 are trademarks or registered trademarks of Sun Microsystems, Inc in the U.S.
 and other countries.

 All SPARC trademarks are used under license and are trademarks
 or registered trademarks of SPARC International, Inc.
 in the U.S. and other countries. Products bearing SPARC
 trademarks are based upon an architecture developed by Sun Microsystems, Inc.

 PostScript is a registered trademark of Adobe Systems, Inc.

 Federal Acquisitions: Commercial Software - Government Users Subject to
 Standard License Terms and Conditions.

 DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
 CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
 IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
 PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT
 TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
 INVALID.

 _________________________________________________________________________

 Copyright 2000-2001 Sun Microsystems, Inc.,
 901 San Antonio Road, Palo Alto, CA  94303, Etats-Unis.
 Tous droits re'serve's.


 Ce produit ou document est prote'ge' par un copyright et distribue' avec
 des licences qui en restreignent l'utilisation, la copie, la distribution,
 et la de'compilation.  Aucune partie de ce produit ou de sa documentation
 associe'e ne peut e^tre reproduite sous aucune forme, par quelque moyen
 que ce soit, sans l'autorisation pre'alable et e'crite de Sun et de ses
 bailleurs de licence, s'il y en a.

 Le logiciel de'tenu par des tiers, et qui comprend la technologie
 relative aux polices de caracte`res, est prote'ge' par un copyright
 et licencie' par des fournisseurs de Sun.

 Sun, Sun Microsystems, le logo Sun, Solaris, Java, JavaServer Pages, Java
 Naming and Directory Interface, JDBC, JDK, JavaMail, et Enterprise JavaBeans,
 sont des marques de fabrique ou des marques de'pose'es de Sun
 Microsystems, Inc. aux Etats-Unis et dans d'autres pays.

 Toutes les marques SPARC sont utilise'es sous licence et sont
 des marques de fabrique ou des marques de'pose'es de SPARC
 International, Inc. aux Etats-Unis et  dans
 d'autres pays. Les produits portant les marques SPARC sont
 base's sur une architecture de'veloppe'e par Sun Microsystems, Inc.

 Postcript est une marque enregistre'e d'Adobe Systems Inc.

 LA DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTES AUTRES CONDITIONS,
 DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES,
 DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
 TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE
 A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.
 -->

 <!--
 This is the XML DTD for the Connector 1.0 deployment descriptor.
 All Connector 1.0 deployment descriptors must include a DOCTYPE
 of the following form:

   <!DOCTYPE connector PUBLIC
 	"-//Sun Microsystems, Inc.//DTD Connector 1.0//EN"
 	"http://java.sun.com/dtd/connector_1_0.dtd">

 -->

 <!--
 The following conventions apply to all J2EE deployment descriptor
 elements unless indicated otherwise.

 - In elements that contain PCDATA, leading and trailing whitespace
   in the data may be ignored.

 - In elements whose value is an "enumerated type", the value is
   case sensitive.

 - In elements that specify a pathname to a file within the same
   JAR file, relative filenames (i.e., those not starting with "/")
   are considered relative to the root of the JAR file's namespace.
   Absolute filenames (i.e., those starting with "/") also specify
   names in the root of the JAR file's namespace.  In general, relative
   names are preferred.  The exception is .war files where absolute
   names are preferred for consistency with the servlet API.
 -->


 <!--
 The connector element is the root element of the deployment descriptor
 for the resource adapter. This element includes general information - vendor
 name, version, specification version supported, icon -  about the
 resource adapter module. It also includes information specific to the
 implementation of the resource adapter library as specified through
 the element resourceadapter.
 -->
 <!ELEMENT connector (display-name?, description?, icon?, vendor-name,
 spec-version, eis-type, version, license?, resourceadapter)>

 <!--
 The element authentication-mechanism specifies an authentication mechanism
 supported by the resource adapter. Note that this support is for
 the resource adapter and not for the underlying EIS instance. The
 optional description specifies any resource adapter specific requirement
 for the support of security contract and authentication mechanism.

 Note that BasicPassword mechanism type should support the
 javax.resource.spi.security.PasswordCredential interface.
 The Kerbv5 mechanism type should support the
 javax.resource.spi.security.GenericCredential interface.

 Used in: resourceadapter
 -->
 <!ELEMENT authentication-mechanism (
 description?, authentication-mechanism-type, credential-interface)>

 <!--
 The element authentication-mechanism-type specifies type of an authentication
 mechanism.

 The example values are:
    <authentication-mechanism-type>BasicPassword
                    </authentication-mechanism-type>
    <authentication-mechanism-type>Kerbv5
                    </authentication-mechanism-type>

 Any additional security mechanisms are outside the scope of the
 Connector architecture specification.

 Used in: authentication-mechanism
 -->
 <!ELEMENT authentication-mechanism-type (#PCDATA)>

 <!--
 The element config-property contains a declaration of a single
 configuration property for a ManagedConnectionFactory instance.

 Each ManagedConnectionFactory instance creates connections to a
 specific EIS instance based on the properties configured on the
 ManagedConnectionFactory instance. The configurable properties are
 specified only once in the deployment descriptor, even though a
 resource adapter can be used to configure multiple ManagedConnnection-
 Factory instances (that create connections to different instances of
 the same EIS).

 The declaration consists of an optional description, name, type
 and an optional value of the configuration property. If the resource
 adapter provider does not specify a value than the deployer is
 responsible for providing a valid value for a configuration property.

 Any bounds or well-defined values of properties should be described
 in the description element.

 Used in: resourceadapter
 -->
 <!ELEMENT config-property (description?, config-property-name,
 config-property-type, config-property-value?)>

 <!--
 The element config-property-name contains the name of a configuration
 property.

 The connector architecture defines a set of well-defined properties
 all of type java.lang.String. These are as follows:
      <config-property-name>ServerName</config-property-name>
      <config-property-name>PortNumber</config-property-name>
      <config-property-name>UserName</config-property-name>
      <config-property-name>Password</config-property-name>
      <config-property-name>ConnectionURL</config-property-name>

 A resource adapter provider can extend this property set to include
 properties specific to the resource adapter and its underlying EIS.

 Used in: config-property

 Example: <config-property-name>ServerName</config-property-name>
 -->
 <!ELEMENT config-property-name (#PCDATA)>

 <!--
 The element config-property-type contains the fully qualified Java
 type of a configuration property as required by ManagedConnection-
 Factory instance.

 The following are the legal values of config-property-type:
    java.lang.Boolean, java.lang.String, java.lang.Integer,
    java.lang.Double, java.lang.Byte, java.lang.Short,
    java.lang.Long, java.lang.Float, java.lang.Character

 Used in: config-property

 Example: <config-property-type>java.lang.String</config-property-type>
 -->
 <!ELEMENT config-property-type (#PCDATA)>

 <!--
 The element config-property-value contains the value of a configuration
 entry.

 Used in: config-property

 Example: <config-property-value>WombatServer</config-property-value>
 -->
 <!ELEMENT config-property-value (#PCDATA)>

 <!--
 The element connection-impl-class specifies the fully-qualified
 name of the Connection class that implements resource adapter
 specific Connection interface.

 Used in: resourceadapter

 Example: <connection-impl-class>com.wombat.ConnectionImpl
          </connection-impl-class>
 -->
 <!ELEMENT connection-impl-class (#PCDATA)>

 <!--
 The element connection-interface specifies the fully-qualified
 name of the Connection interface supported by the resource
 adapter.

 Used in: resourceadapter

 Example: <connection-interface>javax.resource.cci.Connection
          </connection-interface>
 -->
 <!ELEMENT connection-interface (#PCDATA)>

 <!--
 The element connectionfactory-impl-class specifies the fully-qualified
 name of the ConnectionFactory class that implements resource adapter
 specific ConnectionFactory interface.

 Used in: resourceadapter

 Example: <connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
          </connectionfactory-impl-class>
 -->
 <!ELEMENT connectionfactory-impl-class (#PCDATA)>

 <!--
 The element connectionfactory-interface specifies the fully-qualified
 name of the ConnectionFactory interface supported by the resource
 adapter.

 Used in: resourceadapter

 Example: <connectionfactory-interface>com.wombat.ConnectionFactory
          </connectionfactory-interface>
 OR
 <connectionfactory-interface>javax.resource.cci.ConnectionFactory
          </connectionfactory-interface>
 -->
 <!ELEMENT connectionfactory-interface (#PCDATA)>

 <!--
 The element credential-interface specifies the interface that the
 resource adapter implementation supports for the representation
 of the credentials. This element should be used by application server
 to find out the Credential interface it should use as part of the
 security contract.

 The possible values are:
    <credential-interface>javax.resource.spi.security.PasswordCredential
         </credential-interface>
    <credential-interface>javax.resource.spi.security.GenericCredential
         </credential-interface>

 Used in: authentication-mechanism
 -->
 <!ELEMENT credential-interface (#PCDATA)>

 <!--
 The description element is used to provide text describing the parent
 element.  The description element should include any information that
 the resource adapter rar file producer wants to provide to the consumer of
 the resource adapter rar file (i.e., to the Deployer). Typically, the tools
 used by the resource adapter rar file consumer will display the description
 when processing the parent element that contains the description.

 Used in: authentication-mechanism, config-property, connector, license,
 security-permission
 -->
 <!ELEMENT description (#PCDATA)>

 <!--
 The display-name element contains a short name that is intended to be
 displayed by tools.  The display name need not be unique.

 Used in: connector

 Example:

 <display-name>Employee Self Service</display-name>
 -->
 <!ELEMENT display-name (#PCDATA)>

 <!--
 The element eis-type contains information about the type of the
 EIS. For example, the type of an EIS can be product name of EIS
 independent of any version info.

 This helps in identifying EIS instances that can be used with
 this resource adapter.

 Used in: connector
 -->
 <!ELEMENT eis-type (#PCDATA)>

 <!--
 The icon element contains small-icon and large-icon elements that
 specify the file names for small and a large GIF or JPEG icon images
 used to represent the parent element in a GUI tool.

 Used in: connector
 -->
 <!ELEMENT icon (small-icon?, large-icon?)>

 <!--
 The large-icon element contains the name of a file
 containing a large (32 x 32) icon image. The file
 name is a relative path within the resource adapter's
 rar file.

 The image may be either in the JPEG or GIF format.
 The icon can be used by tools.

 Used in: icon

 Example:

 <large-icon>employee-service-icon32x32.jpg</large-icon>
 -->
 <!ELEMENT large-icon (#PCDATA)>

 <!--
 The element license specifies licensing requirements for the resource
 adapter module. This element specifies whether a license is required
 to deploy and use this resource adapter, and an optional description
 of the licensing terms (examples: duration of license, number of
 connection restrictions).

 Used in: connector
 -->
 <!ELEMENT license (description?, license-required)>

 <!--
 The element license-required specifies whether a license is required
 to deploy and use the resource adapter. This element must be one of
 the following:

 	<license-required>true</license-required>
 	<license-required>false</license-required>

 Used in: license
 -->
 <!ELEMENT license-required (#PCDATA)>

 <!--
 The element managedconnectionfactory-class specifies the fully qualified
 name of the Java class that implements the javax.resource.spi.Managed-
 ConnectionFactory interface. This Java class is provided as part of
 resource adapter's implementation of connector architecture specified
 contracts.

 Used in: resourceadapter

 Example:
   <managedconnectionfactory-class>com.wombat.ManagedConnectionFactoryImpl
   </managedconnectionfactory-class>
 -->
 <!ELEMENT managedconnectionfactory-class (#PCDATA)>

 <!--
 The element reauthentication-support specifies whether the resource
 adapter implementation supports re-authentication of existing Managed-
 Connection instance. Note that this information is for the resource
 adapter implementation and not for the underlying EIS instance.

 This element must be one of the following:
         <reauthentication-support>true</reauthentication-support>
         <reauthentication-support>false</reauthentication-support>
 Used in: resourceadapter
 -->
 <!ELEMENT reauthentication-support (#PCDATA)>

 <!--
 The element resourceadapter specifies information about the resource
 adapter. The information includes fully-qualified names of
 class/interfaces required as part of the connector architecture
 specified contracts, level of transaction support provided,
 configurable properties for ManagedConnectionFactory instances,
 one or more authentication mechanisms supported and additional
 required security permissions.

 If there is no authentication-mechanism specified as part of
 resource adapter element then the resource adapter does not
 support any standard security authentication mechanisms as part
 of security contract. The application server ignores the security
 part of the system contracts in this case.

 Used in: connector
 -->
 <!ELEMENT resourceadapter (
 managedconnectionfactory-class, connectionfactory-interface,
 connectionfactory-impl-class, connection-interface,
 connection-impl-class, transaction-support, config-property*,
 authentication-mechanism*, reauthentication-support, security-permission*
 )>

 <!--
 The element security permission specifies a security permission that
 is required by the resource adapter code.

 The security permission listed in the deployment descriptor are ones
 that are different from those required by the default permission set
 as specified in the connector specification. The optional description
 can mention specific reason that resource adapter requires a given
 security permission.

 Used in: resourceadapter
 -->
 <!ELEMENT security-permission (description?, security-permission-spec)>

 <!--
 The element permission-spec specifies a security permission based
 on the Security policy file syntax. Refer to the following URL for
 Sun's implementation of the security permission specification:

 http:

 Used in: security-permission
 -->
 <!ELEMENT security-permission-spec (#PCDATA)>

 <!--
 The small-icon element contains the name of a file
 containing a small (16 x 16) icon image. The file
 name is a relative path within the resource adapter's
 rar file.

 The image may be either in the JPEG or GIF format.
 The icon can be used by tools.

 Used in: icon

 Example:

 <small-icon>employee-service-icon16x16.jpg</small-icon>
 -->
 <!ELEMENT small-icon (#PCDATA)>

 <!--
 The element spec-version specifies the version of the connector
 architecture specification that is supported by this resource
 adapter. This information enables deployer to configure the resource
 adapter to support deployment and runtime requirements of the
 corresponding connector architecture specification.

 Used in: connector

 Example:
   <spec-version>1.0</spec-version>
 -->
 <!ELEMENT spec-version (#PCDATA)>

 <!--
 The transaction-support element specifies the level of transaction
 support provided by the resource adapter.
 The value of transaction-support must be one of the following:
  <transaction-support>NoTransaction</transaction-support>
  <transaction-support>LocalTransaction</transaction-support>
  <transaction-support>XATransaction</transaction-support>

 Used in: resourceadapter
 -->
 <!ELEMENT transaction-support (#PCDATA)>

 <!--
 The element vendor-name specifies the name of resource adapter provider
 vendor.

 Used in: connector

 Example:
   <vendor-name>Wombat Corp.</vendor-name>
 -->
 <!ELEMENT vendor-name (#PCDATA)>

 <!--
 The element version specifies a string-based version of the
 resource adapter from the resource adapter provider.

 Used in: connector

 Example:
   <version>1.0</version>
 -->
 <!ELEMENT version (#PCDATA)>

 <!--
 The ID mechanism is to allow tools that produce additional deployment
 information (i.e., information beyond the standard deployment
 descriptor information) to store the non-standard information in a
 separate file, and easily refer from these tool-specific files to the
 information in the standard deployment descriptor.

 Tools are not allowed to add the non-standard information into the
 standard deployment descriptor.
 -->

 <!ATTLIST authentication-mechanism id ID #IMPLIED>
 <!ATTLIST authentication-mechanism-type id ID #IMPLIED>
 <!ATTLIST config-property id ID #IMPLIED>
 <!ATTLIST config-property-name id ID #IMPLIED>
 <!ATTLIST config-property-type id ID #IMPLIED>
 <!ATTLIST config-property-value id ID #IMPLIED>
 <!ATTLIST connection-impl-class id ID #IMPLIED>
 <!ATTLIST connection-interface id ID #IMPLIED>
 <!ATTLIST connectionfactory-impl-class id ID #IMPLIED>
 <!ATTLIST connectionfactory-interface id ID #IMPLIED>
 <!ATTLIST connector id ID #IMPLIED>
 <!ATTLIST credential-interface id ID #IMPLIED>
 <!ATTLIST description id ID #IMPLIED>
 <!ATTLIST display-name id ID #IMPLIED>
 <!ATTLIST eis-type id ID #IMPLIED>
 <!ATTLIST icon id ID #IMPLIED>
 <!ATTLIST large-icon id ID #IMPLIED>
 <!ATTLIST license id ID #IMPLIED>
 <!ATTLIST license-required id ID #IMPLIED>
 <!ATTLIST managedconnectionfactory-class id ID #IMPLIED>
 <!ATTLIST reauthentication-support id ID #IMPLIED>
 <!ATTLIST resourceadapter id ID #IMPLIED>
 <!ATTLIST security-permission id ID #IMPLIED>
 <!ATTLIST security-permission-spec id ID #IMPLIED>
 <!ATTLIST small-icon id ID #IMPLIED>
 <!ATTLIST spec-version id ID #IMPLIED>
 <!ATTLIST transaction-support id ID #IMPLIED>
 <!ATTLIST vendor-name id ID #IMPLIED>
 <!ATTLIST version id ID #IMPLIED>
	<!--
	Copyright 2000-2001 Sun Microsystems, Inc. 901 San Antonio Road,
	Palo Alto, CA 94303, U.S.A. All rights reserved.

	This product or document is protected by copyright and distributed
	under licenses restricting its use, copying, distribution, and
	decompilation. No part of this product or documentation may be
	reproduced in any form by any means without prior written authorization
	of Sun and its licensors, if any.

	Third party software, including font technology, is copyrighted and
	licensed from Sun suppliers.

	Sun, Sun Microsystems, the Sun Logo, Solaris, Java, JavaServer Pages, Java
	Naming and Directory Interface, JDBC, JDK, JavaMail and Enterprise JavaBeans,
	are trademarks or registered trademarks of Sun Microsystems, Inc in the U.S.
	and other countries.

	All SPARC trademarks are used under license and are trademarks
	or registered trademarks of SPARC International, Inc.
	in the U.S. and other countries. Products bearing SPARC
	trademarks are based upon an architecture developed by Sun Microsystems, Inc.

	PostScript is a registered trademark of Adobe Systems, Inc.

	Federal Acquisitions: Commercial Software - Government Users Subject to
	Standard License Terms and Conditions.

	DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
	CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
	IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
	PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT
	TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
	INVALID.

	_________________________________________________________________________

	Copyright 2000-2001 Sun Microsystems, Inc.,
	901 San Antonio Road, Palo Alto, CA 94303, Etats-Unis.
	Tous droits re'serve's.


	Ce produit ou document est prote'ge' par un copyright et distribue' avec
	des licences qui en restreignent l'utilisation, la copie, la distribution,
	et la de'compilation. Aucune partie de ce produit ou de sa documentation
	associe'e ne peut e^tre reproduite sous aucune forme, par quelque moyen
	que ce soit, sans l'autorisation pre'alable et e'crite de Sun et de ses
	bailleurs de licence, s'il y en a.

	Le logiciel de'tenu par des tiers, et qui comprend la technologie
	relative aux polices de caracte`res, est prote'ge' par un copyright
	et licencie' par des fournisseurs de Sun.

	Sun, Sun Microsystems, le logo Sun, Solaris, Java, JavaServer Pages, Java
	Naming and Directory Interface, JDBC, JDK, JavaMail, et Enterprise JavaBeans,
	sont des marques de fabrique ou des marques de'pose'es de Sun
	Microsystems, Inc. aux Etats-Unis et dans d'autres pays.

	Toutes les marques SPARC sont utilise'es sous licence et sont
	des marques de fabrique ou des marques de'pose'es de SPARC
	International, Inc. aux Etats-Unis et dans
	d'autres pays. Les produits portant les marques SPARC sont
	base's sur une architecture de'veloppe'e par Sun Microsystems, Inc.

	Postcript est une marque enregistre'e d'Adobe Systems Inc.

	LA DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTES AUTRES CONDITIONS,
	DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES,
	DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
	TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE
	A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.
	-->

	<!--
	This is the XML DTD for the Connector 1.0 deployment descriptor.
	All Connector 1.0 deployment descriptors must include a DOCTYPE
	of the following form:

	<!DOCTYPE connector PUBLIC
	"-//Sun Microsystems, Inc.//DTD Connector 1.0//EN"
	"http://java.sun.com/dtd/connector_1_0.dtd">

	-->

	<!--
	The following conventions apply to all J2EE deployment descriptor
	elements unless indicated otherwise.

	- In elements that contain PCDATA, leading and trailing whitespace
	in the data may be ignored.

	- In elements whose value is an "enumerated type", the value is
	case sensitive.

	- In elements that specify a pathname to a file within the same
	JAR file, relative filenames (i.e., those not starting with "/")
	are considered relative to the root of the JAR file's namespace.
	Absolute filenames (i.e., those starting with "/") also specify
	names in the root of the JAR file's namespace. In general, relative
	names are preferred. The exception is .war files where absolute
	names are preferred for consistency with the servlet API.
	-->


	<!--
	The connector element is the root element of the deployment descriptor
	for the resource adapter. This element includes general information - vendor
	name, version, specification version supported, icon - about the
	resource adapter module. It also includes information specific to the
	implementation of the resource adapter library as specified through
	the element resourceadapter.
	-->
	<!ELEMENT connector (display-name?, description?, icon?, vendor-name,
	spec-version, eis-type, version, license?, resourceadapter)>

	<!--
	The element authentication-mechanism specifies an authentication mechanism
	supported by the resource adapter. Note that this support is for
	the resource adapter and not for the underlying EIS instance. The
	optional description specifies any resource adapter specific requirement
	for the support of security contract and authentication mechanism.

	Note that BasicPassword mechanism type should support the
	javax.resource.spi.security.PasswordCredential interface.
	The Kerbv5 mechanism type should support the
	javax.resource.spi.security.GenericCredential interface.

	Used in: resourceadapter
	-->
	<!ELEMENT authentication-mechanism (
	description?, authentication-mechanism-type, credential-interface)>

	<!--
	The element authentication-mechanism-type specifies type of an authentication
	mechanism.

	The example values are:
	<authentication-mechanism-type>BasicPassword
	</authentication-mechanism-type>
	<authentication-mechanism-type>Kerbv5
	</authentication-mechanism-type>

	Any additional security mechanisms are outside the scope of the
	Connector architecture specification.

	Used in: authentication-mechanism
	-->
	<!ELEMENT authentication-mechanism-type (#PCDATA)>

	<!--
	The element config-property contains a declaration of a single
	configuration property for a ManagedConnectionFactory instance.

	Each ManagedConnectionFactory instance creates connections to a
	specific EIS instance based on the properties configured on the
	ManagedConnectionFactory instance. The configurable properties are
	specified only once in the deployment descriptor, even though a
	resource adapter can be used to configure multiple ManagedConnnection-
	Factory instances (that create connections to different instances of
	the same EIS).

	The declaration consists of an optional description, name, type
	and an optional value of the configuration property. If the resource
	adapter provider does not specify a value than the deployer is
	responsible for providing a valid value for a configuration property.

	Any bounds or well-defined values of properties should be described
	in the description element.

	Used in: resourceadapter
	-->
	<!ELEMENT config-property (description?, config-property-name,
	config-property-type, config-property-value?)>

	<!--
	The element config-property-name contains the name of a configuration
	property.

	The connector architecture defines a set of well-defined properties
	all of type java.lang.String. These are as follows:
	<config-property-name>ServerName</config-property-name>
	<config-property-name>PortNumber</config-property-name>
	<config-property-name>UserName</config-property-name>
	<config-property-name>Password</config-property-name>
	<config-property-name>ConnectionURL</config-property-name>

	A resource adapter provider can extend this property set to include
	properties specific to the resource adapter and its underlying EIS.

	Used in: config-property

	Example: <config-property-name>ServerName</config-property-name>
	-->
	<!ELEMENT config-property-name (#PCDATA)>

	<!--
	The element config-property-type contains the fully qualified Java
	type of a configuration property as required by ManagedConnection-
	Factory instance.

	The following are the legal values of config-property-type:
	java.lang.Boolean, java.lang.String, java.lang.Integer,
	java.lang.Double, java.lang.Byte, java.lang.Short,
	java.lang.Long, java.lang.Float, java.lang.Character

	Used in: config-property

	Example: <config-property-type>java.lang.String</config-property-type>
	-->
	<!ELEMENT config-property-type (#PCDATA)>

	<!--
	The element config-property-value contains the value of a configuration
	entry.

	Used in: config-property

	Example: <config-property-value>WombatServer</config-property-value>
	-->
	<!ELEMENT config-property-value (#PCDATA)>

	<!--
	The element connection-impl-class specifies the fully-qualified
	name of the Connection class that implements resource adapter
	specific Connection interface.

	Used in: resourceadapter

	Example: <connection-impl-class>com.wombat.ConnectionImpl
	</connection-impl-class>
	-->
	<!ELEMENT connection-impl-class (#PCDATA)>

	<!--
	The element connection-interface specifies the fully-qualified
	name of the Connection interface supported by the resource
	adapter.

	Used in: resourceadapter

	Example: <connection-interface>javax.resource.cci.Connection
	</connection-interface>
	-->
	<!ELEMENT connection-interface (#PCDATA)>

	<!--
	The element connectionfactory-impl-class specifies the fully-qualified
	name of the ConnectionFactory class that implements resource adapter
	specific ConnectionFactory interface.

	Used in: resourceadapter

	Example: <connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
	</connectionfactory-impl-class>
	-->
	<!ELEMENT connectionfactory-impl-class (#PCDATA)>

	<!--
	The element connectionfactory-interface specifies the fully-qualified
	name of the ConnectionFactory interface supported by the resource
	adapter.

	Used in: resourceadapter

	Example: <connectionfactory-interface>com.wombat.ConnectionFactory
	</connectionfactory-interface>
	OR
	<connectionfactory-interface>javax.resource.cci.ConnectionFactory
	</connectionfactory-interface>
	-->
	<!ELEMENT connectionfactory-interface (#PCDATA)>

	<!--
	The element credential-interface specifies the interface that the
	resource adapter implementation supports for the representation
	of the credentials. This element should be used by application server
	to find out the Credential interface it should use as part of the
	security contract.

	The possible values are:
	<credential-interface>javax.resource.spi.security.PasswordCredential
	</credential-interface>
	<credential-interface>javax.resource.spi.security.GenericCredential
	</credential-interface>

	Used in: authentication-mechanism
	-->
	<!ELEMENT credential-interface (#PCDATA)>

	<!--
	The description element is used to provide text describing the parent
	element. The description element should include any information that
	the resource adapter rar file producer wants to provide to the consumer of
	the resource adapter rar file (i.e., to the Deployer). Typically, the tools
	used by the resource adapter rar file consumer will display the description
	when processing the parent element that contains the description.

	Used in: authentication-mechanism, config-property, connector, license,
	security-permission
	-->
	<!ELEMENT description (#PCDATA)>

	<!--
	The display-name element contains a short name that is intended to be
	displayed by tools. The display name need not be unique.

	Used in: connector

	Example:

	<display-name>Employee Self Service</display-name>
	-->
	<!ELEMENT display-name (#PCDATA)>

	<!--
	The element eis-type contains information about the type of the
	EIS. For example, the type of an EIS can be product name of EIS
	independent of any version info.

	This helps in identifying EIS instances that can be used with
	this resource adapter.

	Used in: connector
	-->
	<!ELEMENT eis-type (#PCDATA)>

	<!--
	The icon element contains small-icon and large-icon elements that
	specify the file names for small and a large GIF or JPEG icon images
	used to represent the parent element in a GUI tool.

	Used in: connector
	-->
	<!ELEMENT icon (small-icon?, large-icon?)>

	<!--
	The large-icon element contains the name of a file
	containing a large (32 x 32) icon image. The file
	name is a relative path within the resource adapter's
	rar file.

	The image may be either in the JPEG or GIF format.
	The icon can be used by tools.

	Used in: icon

	Example:

	<large-icon>employee-service-icon32x32.jpg</large-icon>
	-->
	<!ELEMENT large-icon (#PCDATA)>

	<!--
	The element license specifies licensing requirements for the resource
	adapter module. This element specifies whether a license is required
	to deploy and use this resource adapter, and an optional description
	of the licensing terms (examples: duration of license, number of
	connection restrictions).

	Used in: connector
	-->
	<!ELEMENT license (description?, license-required)>

	<!--
	The element license-required specifies whether a license is required
	to deploy and use the resource adapter. This element must be one of
	the following:

	<license-required>true</license-required>
	<license-required>false</license-required>

	Used in: license
	-->
	<!ELEMENT license-required (#PCDATA)>

	<!--
	The element managedconnectionfactory-class specifies the fully qualified
	name of the Java class that implements the javax.resource.spi.Managed-
	ConnectionFactory interface. This Java class is provided as part of
	resource adapter's implementation of connector architecture specified
	contracts.

	Used in: resourceadapter

	Example:
	<managedconnectionfactory-class>com.wombat.ManagedConnectionFactoryImpl
	</managedconnectionfactory-class>
	-->
	<!ELEMENT managedconnectionfactory-class (#PCDATA)>

	<!--
	The element reauthentication-support specifies whether the resource
	adapter implementation supports re-authentication of existing Managed-
	Connection instance. Note that this information is for the resource
	adapter implementation and not for the underlying EIS instance.

	This element must be one of the following:
	<reauthentication-support>true</reauthentication-support>
	<reauthentication-support>false</reauthentication-support>
	Used in: resourceadapter
	-->
	<!ELEMENT reauthentication-support (#PCDATA)>

	<!--
	The element resourceadapter specifies information about the resource
	adapter. The information includes fully-qualified names of
	class/interfaces required as part of the connector architecture
	specified contracts, level of transaction support provided,
	configurable properties for ManagedConnectionFactory instances,
	one or more authentication mechanisms supported and additional
	required security permissions.

	If there is no authentication-mechanism specified as part of
	resource adapter element then the resource adapter does not
	support any standard security authentication mechanisms as part
	of security contract. The application server ignores the security
	part of the system contracts in this case.

	Used in: connector
	-->
	<!ELEMENT resourceadapter (
	managedconnectionfactory-class, connectionfactory-interface,
	connectionfactory-impl-class, connection-interface,
	connection-impl-class, transaction-support, config-property*,
	authentication-mechanism, reauthentication-support, security-permission
	)>

	<!--
	The element security permission specifies a security permission that
	is required by the resource adapter code.

	The security permission listed in the deployment descriptor are ones
	that are different from those required by the default permission set
	as specified in the connector specification. The optional description
	can mention specific reason that resource adapter requires a given
	security permission.

	Used in: resourceadapter
	-->
	<!ELEMENT security-permission (description?, security-permission-spec)>

	<!--
	The element permission-spec specifies a security permission based
	on the Security policy file syntax. Refer to the following URL for
	Sun's implementation of the security permission specification:

	http:

	Used in: security-permission
	-->
	<!ELEMENT security-permission-spec (#PCDATA)>

	<!--
	The small-icon element contains the name of a file
	containing a small (16 x 16) icon image. The file
	name is a relative path within the resource adapter's
	rar file.

	The image may be either in the JPEG or GIF format.
	The icon can be used by tools.

	Used in: icon

	Example:

	<small-icon>employee-service-icon16x16.jpg</small-icon>
	-->
	<!ELEMENT small-icon (#PCDATA)>

	<!--
	The element spec-version specifies the version of the connector
	architecture specification that is supported by this resource
	adapter. This information enables deployer to configure the resource
	adapter to support deployment and runtime requirements of the
	corresponding connector architecture specification.

	Used in: connector

	Example:
	<spec-version>1.0</spec-version>
	-->
	<!ELEMENT spec-version (#PCDATA)>

	<!--
	The transaction-support element specifies the level of transaction
	support provided by the resource adapter.
	The value of transaction-support must be one of the following:
	<transaction-support>NoTransaction</transaction-support>
	<transaction-support>LocalTransaction</transaction-support>
	<transaction-support>XATransaction</transaction-support>

	Used in: resourceadapter
	-->
	<!ELEMENT transaction-support (#PCDATA)>

	<!--
	The element vendor-name specifies the name of resource adapter provider
	vendor.

	Used in: connector

	Example:
	<vendor-name>Wombat Corp.</vendor-name>
	-->
	<!ELEMENT vendor-name (#PCDATA)>

	<!--
	The element version specifies a string-based version of the
	resource adapter from the resource adapter provider.

	Used in: connector

	Example:
	<version>1.0</version>
	-->
	<!ELEMENT version (#PCDATA)>

	<!--
	The ID mechanism is to allow tools that produce additional deployment
	information (i.e., information beyond the standard deployment
	descriptor information) to store the non-standard information in a
	separate file, and easily refer from these tool-specific files to the
	information in the standard deployment descriptor.

	Tools are not allowed to add the non-standard information into the
	standard deployment descriptor.
	-->

	<!ATTLIST authentication-mechanism id ID #IMPLIED>
	<!ATTLIST authentication-mechanism-type id ID #IMPLIED>
	<!ATTLIST config-property id ID #IMPLIED>
	<!ATTLIST config-property-name id ID #IMPLIED>
	<!ATTLIST config-property-type id ID #IMPLIED>
	<!ATTLIST config-property-value id ID #IMPLIED>
	<!ATTLIST connection-impl-class id ID #IMPLIED>
	<!ATTLIST connection-interface id ID #IMPLIED>
	<!ATTLIST connectionfactory-impl-class id ID #IMPLIED>
	<!ATTLIST connectionfactory-interface id ID #IMPLIED>
	<!ATTLIST connector id ID #IMPLIED>
	<!ATTLIST credential-interface id ID #IMPLIED>
	<!ATTLIST description id ID #IMPLIED>
	<!ATTLIST display-name id ID #IMPLIED>
	<!ATTLIST eis-type id ID #IMPLIED>
	<!ATTLIST icon id ID #IMPLIED>
	<!ATTLIST large-icon id ID #IMPLIED>
	<!ATTLIST license id ID #IMPLIED>
	<!ATTLIST license-required id ID #IMPLIED>
	<!ATTLIST managedconnectionfactory-class id ID #IMPLIED>
	<!ATTLIST reauthentication-support id ID #IMPLIED>
	<!ATTLIST resourceadapter id ID #IMPLIED>
	<!ATTLIST security-permission id ID #IMPLIED>
	<!ATTLIST security-permission-spec id ID #IMPLIED>
	<!ATTLIST small-icon id ID #IMPLIED>
	<!ATTLIST spec-version id ID #IMPLIED>
	<!ATTLIST transaction-support id ID #IMPLIED>
	<!ATTLIST vendor-name id ID #IMPLIED>
	<!ATTLIST version id ID #IMPLIED>