webpackJsonp([18],{uwRd:function(e,t){e.exports={type:"object",properties:{"content-spec":{type:"string",default:"urn:spec://eclipse.org/unide/process-message#v3",description:"Defines what the format version is"},device:{type:"object",description:"Contains information about the device",properties:{id:{type:"string",description:"The unique identification of the device. As this is used to identify a device independently from time or location the id itself must be stable and unique. Recommended is to use a universally unique identifier (UUID).",maxLength:36},mode:{type:"string",description:"The operational mode indicates the functional state of the device. This is not restrictected to enum, since it is dependent on the machine, process or use case. Examples are 'auto', 'manual', 'test', 'wait', 'maintenance', 'run', 'stop', 'other' or 'unknown'"},state:{type:"string",enum:["OK","INFO","WARN","ERROR","UNKNOWN"],default:"UNKNOWN",description:"The state describes the technical condition of a device."}},required:["id"]},part:{type:"object",properties:{code:{type:"string",description:"The code is an addendum to the result which allows to pass information in the case the result was NOK. The value often stems from the integrated system e.g. a PLC code",maxLength:128},id:{type:"string",description:"Identifies a part. This id comes from a 3rd party system and thus we have no guarantees if this is unique or not.",maxLength:256},type:{type:"string",enum:["SINGLE","BATCH"],description:"Describes the type of the part. Type SINGLE means a single item is processed. Type BATCH means multiple items of the same type are processed.",default:"SINGLE"},typeId:{type:"string",description:"Identifies a part type",maxLength:256},result:{type:"string",enum:["OK","NOK","UNKNOWN"],description:"Information if the result was ok or not. This is only required if part information should be saved.",default:"UNKNOWN"}},required:["id"]},process:{type:"object",description:"Contains information about the process. If the process JSON object is set, then all information in measurements are process phases",properties:{externalId:{type:"string",description:"The process id identifies the process as part of long living process. The process id can be used to connect multiple processes in a manufacturing chain. The id has to be set and tracked by the different devices in the chain.",maxLength:36},program:{type:"object",description:"Contains information about the program that was used in the process.",properties:{id:{type:"string",description:"The program identifier",maxLength:36},lastChangedDate:{type:"string",format:"date-time",description:"The date when the program was last changed"},name:{type:"string",description:"The name of the program",maxLength:256}},required:["id"]},result:{type:"string",enum:["OK","NOK","UNKNOWN"],description:"Information if the result was ok or not. This is only required if part information should be saved.",default:"UNKNOWN"},shutoffPhase:{type:"string",description:"The id of the phase that led to stop the process. The shutOffPhase is the phase of the process in which either pre-defined parameters are met to successfully finish the process or an error that stopped the process. That is not necessarily the last phase. The shutOffPhase should be sent when the last process phase is sent."},ts:{type:"string",format:"date-time",description:"Start time of the process"}},required:["ts"]},measurements:{allOf:[{type:"array",minItems:1,items:{type:"object",properties:{code:{type:"string",description:"The code is an addendum to the result which allows to pass information in the case the result was NOK. The value often stems from the integrated system e.g. a PLC code",maxLength:128},context:{type:"object",description:"Provides additional information about the data provided in the series element. An entry in the context applies to the element in the series with the same key.",patternProperties:{"^[^$]+":{type:"object",description:"The key shall be the name of a measurement point (element of series element). The value is a structure of additional context information.",properties:{accuracy:{oneOf:[{type:"number",description:"A constant that describes the accuracy of the corresponding measurement as absolute value"},{type:"array",description:"An array of accuracy values. The items of the array correspond to the respective measurements at the same position.",items:{type:"number"}}]},limits:{description:"Provides information about the limit for data provided in the series element. The limit corresponds to the measurement point (see also series element) with the same key. The value is a structure of upper/lower limits and applies to numeric values only.",type:"object",oneOf:[{type:"object",description:"A constant limit for all corresponding measurements",properties:{lowerError:{description:"Indicates an error if this limit is underrun",type:"number"},lowerWarn:{description:"Indicates a warning if this limit is underrun",type:"number"},target:{description:"Indicates the intented target value of the measurement",type:"number"},upperError:{description:"Indicates an error if this limit is exceeded",type:"number"},upperWarn:{description:"Indicates a warning if this limit is exceeded",type:"number"}}},{type:"object",description:"An array of limit values. The items of the array correspond to the respective measurements at the same position.",properties:{lowerError:{description:"Indicates an error if these limits is underrun. The values correspond to the respective measurements in the given order.",type:"array",items:{type:"number"}},lowerWarn:{description:"Indicates a warning if these limits is underrun. The values correspond to the respective measurements in the given order.",type:"array",items:{type:"number"}},target:{description:"Indicates the intented target values. The values correspond to the respective measurements in the given order.",type:"array",items:{type:"number"}},upperError:{description:"Indicates an error if these limits is exceeded. The values correspond to the respective measurements in the given order.",type:"array",items:{type:"number"}},upperWarn:{description:"Indicates a warning if these limits is exceeded. The values correspond to the respective measurements in the given order.",type:"array",items:{type:"number"}}}}]},offset:{description:"The offset applies to numeric data type only.",oneOf:[{type:"number",description:"Describes the offset of the corresponding measurement as absolute value"},{type:"array",description:"An array of offset values. The items of the array correspond to the respective measurements at the same position.",items:{type:"number"}}]},type:{type:"string",description:"The data type of the corresponding measurement value.",enum:["BASE64","BOOLEAN","NUMBER","OTHER","REF","STRING"],default:"NUMBER"},unit:{type:"string",description:"Describes the unit of the corresponding measurement. It is recommended to use symbols as defined in https://tools.ietf.org/html/draft-ietf-core-senml-14#section-12.1"}},minProperties:1}},required:[]},result:{type:"string",enum:["OK","NOK","UNKNOWN"],description:"Information if the result was ok or not. This is only required if part information should be saved.",default:"UNKNOWN"},series:{type:"object",description:"The series data collected for the measurements. In the case of a time series, the measurement point 'time' should contain the time offsets.",properties:{time:{type:"array",description:"The time offset in milliseconds to the 'ts' field of the measurement.",items:{type:"number"}}},patternProperties:{"^[^$]+":{type:"array",items:{type:["boolean","number","string"],description:"The type of this measurement series is dependendant on the context.type. It defaults to number"}}},required:[],minProperties:1},ts:{format:"date-time",type:"string",description:"Start time of the the data measurment in  ISO 8601 format"}},required:["ts","series"]}},{type:"array",items:{type:"object",properties:{name:{type:"string",description:"The name of the process phase",maxLength:256},phase:{type:"string",description:"The id of the process phase",maxLength:256},specialValues:{type:"array",items:{type:"object",description:"Provides information about special or interesting values during the process phase.",properties:{time:{type:"number",description:"The time offset in milliseconds to the 'ts' field of the measurement"},name:{type:"string",description:"Indicates the type of the specialValue (e.g. 'shutoff', endanzug', 'turningPoint' etc.)"},value:{type:"object",description:"Contains the actual (multidimensional) value of interest. Similarly to series, every entry matches a Measurement Point of the device",patternProperties:{"^[^$]+":{type:["boolean","number","string"],description:"The type of this measurement series is dependendant on the context.type. It defaults to number"}},minProperties:1}},required:["value"]}}}}}]}},required:["content-spec","device","process","measurements"]}}});