| Setup: |
| |
| - install the Spacewar example |
| - activate the debug.ajproperties |
| |
| |
| Test1 - bug 102865 - NPE |
| ---------------------------------------- |
| |
| - have the error log view visible |
| - open spacewar/debug.aj in the editor |
| - position the cursor below "aspect Debug" |
| - press Shift+Alt+P and the inplace view appears |
| - type 'f' into the text filter box at the top |
| - there should be nothing matching this and the view |
| shouldn't contain anything |
| (XREF_INPLACE_1) |
| - press the "tab" key |
| - press "return" |
| - the view should stay up and there should be no new |
| errors in the error log |
| (XREF_INPLACE_2) |
| - to close the view, press "esc". |
| |
| |
| Test3 - Shift+Alt+P twice shows xrefs for entire file |
| ---------------------------------------------------- |
| |
| - open spacewar/debug.aj in the editor |
| - position the cursor somewhere in the editor |
| - press Shift+Alt+P and the inplace view appears showing |
| the xrefs for the current selection |
| (XREF_INPLACE_3) |
| |
| - there is a message at the bottom of the inplace view |
| "Press 'Shift+Alt+P' to show cross references |
| for entire file" |
| (XREF_INPLACE_4) |
| |
| - press Shift+Alt+P again |
| - the view now shows xrefs for the entire file |
| (XREF_INPLACE_5) |
| - there is a message at the bottom of the inplace view |
| "Press 'Shift+Alt+P' to hide cross references |
| for entire file" |
| (XREF_INPLACE_6) |
| |
| - press Shift+Alt+P again |
| - the view now shows the xrefs for the original selection |
| (provided you haven't changed selection in the view) |
| (XREF_INPLACE_7) |
| |
| Test4 - Scroll bar - should show current selection |
| -------------------------------------------------- |
| |
| - open spacewar/debug.aj in the editor |
| - position the cursor towards the end of the file |
| - press Shift+Alt+P and the inplace view appears showing |
| the xrefs for the current selection with the current |
| selection highlighted in the view |
| (XREF_INPLACE_8) |
| - press Shift+Alt+P again |
| - the view now shows xrefs for the entire file with the |
| selection from test 13 highlighted and showing |
| (XREF_INPLACE_9) |
| |
| - press Shift+Alt+P again |
| - the view now shows the xrefs for the original selection |
| (provided you haven't changed selection in the view) |
| and this is highlighted in the view |
| (XREF_INPLACE_10) |
| |
| Test5 - navigation from the view |
| -------------------------------- |
| |
| - open spacewar/debug.aj |
| - position the cursor somewhere in the file |
| - bring up the inplace cross reference view |
| - move the cursor around to select something |
| - press return |
| - the corresponding place should be opened in the editor |
| (XREF_INPLACE_11) |
| - repeat for several different types of selection |
| navigation should always work |
| (XREF_INPLACE_12) |
| |
| |
| Test6 - text filtering should keep children |
| ------------------------------------------- |
| |
| - open spacewar/debug.aj |
| - position the cursor somewhere in the file |
| - bring up the inplace cross reference view to show |
| the xrefs for the entire file (either from the selection |
| position in the editor or by using the key sequence twice) |
| - type "after" in the text filtering section at the top |
| of the view |
| - you should see some "afterReturning" nodes with "advises" |
| then the places they advice below them |
| (XREF_INPLACE_13) |
| |
| - try some more text filtering - should always show |
| children |
| (XREF_INPLACE_14) |
| |
| Test 7 - bug 95726: Quick XRef Navigate menu entry |
| -------------------------------------------------- |
| |
| - open spacewar/debug.aj (ensuring that it is included |
| in the current build configuration). |
| - position the cursor somewhere in the file |
| - go to the Navigate menu and there should be a menu item |
| "Quick Cross References" in the same section as "Quick Outline" |
| |
| (XREF_INPLACE_15) |
| |
| - bring up the inplace cross references view via |
| |
| Navigate > Quick Cross References |
| |
| - the inplace xref view should appear with the current |
| selection |
| (XREF_INPLACE_16) |
| |
| - select a project, package or file in the package explorer |
| - open the Navigate menu |
| - the "Quick Cross References" entry should be disabled |
| (greyed out) |
| (XREF_INPLACE_17) |
| |
| - select something in the outline view |
| - open the "Navigate" menu |
| - the "Quick Cross References" entry should be activated |
| |
| (XREF_INPLACE_18) |
| |
| Test8 - Applying XRef Filters should update tree, (Feature 95724) |
| ---------------------------- |
| |
| Test Exclude, (Not for whole document) |
| -------------------------------------- |
| |
| - Open the Spacewar Example project |
| - If it is not already, activate the demo build configuration |
| - Open the Display1.aj file from within the spacewar package, in an editor window |
| - Navigate to line 85, (some after advice) |
| - press Shift+Alt+P and the inplace cross reference view appears showing |
| the xrefs for the current selection |
| - The inplace cross reference view should now have a tree like this: |
| |
| |- afterReturning(Pilot) |
| |->> advises |
| |- Game: ... |
| |- Game: ... |
| |- Game: ... |
| |- Robot: ... |
| (XREF_INPLACE_19) |
| |
| - Bring up the View Menu from the drop down button in the inplace cross reference view |
| - Select the 'Filters...' button |
| - A 'Cross References Filter' dialog should appear |
| (XREF_INPLACE_20) |
| |
| - In the presented dialog, de-select any relationships that are checked |
| - Check the 'advises' relationship checkbox and click OK |
| - The inplace cross reference view should now have a tree like this: |
| |
| - afterReturning(Pilot) |
| (XREF_INPLACE_21) |
| |
| - Close the inplace cross reference view |
| - press Shift+Alt+P and the inplace cross reference view appears showing |
| the xrefs for the current selection |
| - Make sure the inplace cross reference view still has a tree like this: |
| |
| - afterReturning(Pilot) |
| (XREF_INPLACE_22) |
| |
| Test Include, (Not for whole document) |
| -------------------------------------- |
| |
| - Bring up the inplace cross reference view, (press Shift+Alt+P) |
| - Bring up the View Menu from the drop down button in the inplace cross reference view |
| - Select the 'Filters...' button |
| - In the presented dialog, the 'advises' relationship checkbox should be checked |
| (XREF_INPLACE_23) |
| |
| - Uncheck the 'advises' relationship checkbox and click OK |
| - The inplace cross reference view should now have a tree like this: |
| |
| |- afterReturning(Pilot) |
| |->> advises |
| |- Game: ... |
| |- Game: ... |
| |- Game: ... |
| |- Robot: ... |
| (XREF_INPLACE_24) |
| |
| Test Persistence of Filters, (Not for whole document) |
| ----------------------------------------------------- |
| |
| - Bring up the inplace cross reference view, (press Shift+Alt+P) |
| - Bring up the View Menu from the drop down button in the inplace cross reference view |
| - Select the 'Filters...' button |
| - In the presented dialog, press 'Select All' and click OK |
| - The inplace cross reference view should now have a tree like this: |
| |
| - afterReturning(Pilot) |
| (XREF_INPLACE_25) |
| |
| - Close and reopen Eclipse |
| - Navigate to Display1.aj and line 85 |
| - Bring up the inplace cross reference view, (press Shift+Alt+P) |
| - The inplace cross reference view should still have a tree like this: |
| |
| - afterReturning(Pilot) |
| (XREF_INPLACE_26) |
| |
| - Bring up the View Menu from the drop down button in the Cross References toolbar |
| - Select the 'Filters...' button |
| - In the presented dialog, all filter checkboxes should be checked |
| (XREF_INPLACE_27) |
| |
| - Click de-select all and click OK |
| |
| - The inplace cross reference view should now have a tree like this: |
| |
| |- afterReturning(Pilot) |
| |->> advises |
| |- Game: ... |
| |- Game: ... |
| |- Game: ... |
| |- Robot: ... |
| (XREF_INPLACE_28) |
| |
| Test Exclusion and inclusion for whole document |
| ----------------------------------------------- |
| |
| - Navigate to Display1.aj and line 85 |
| - Bring up the inplace cross reference view to show |
| the xrefs for the entire file (either from the selection |
| position in the editor or by using the key sequence twice) |
| - The inplace cross reference view should now have a tree like this: |
| |
| (C) Display1 |
| |- paintObjects(Graphics) |
| | |- method-call(... |
| | |->> advised by |
| | |- Coordinator.before():... |
| | |- Coordinator.after():... |
| |- (A) SpaceObjectPainting |
| |- SpaceObject.paint(Graphics) |
| | |->> declared on |
| | |- (C) SpaceObject |
| |- Ship.color |
| | |->> declared on |
| | |- (C) Ship |
| |- afterReturning(Pilot) |
| | |->> advises |
| | |- Game: ... |
| | |- Game: ... |
| | |- Game: ... |
| | |- Robot: ... |
| |- Ship.paint(Graphics) |
| | |->> declared on |
| | |- (C) Ship |
| |- Bullet.paint(Graphics) |
| | |->> declared on |
| | |- (C) Bullet |
| |- EnergyPacket.paint(Graphics) |
| |->> declared on |
| |- (C) EnergyPacket |
| (XREF_INPLACE_29) |
| |
| - Bring up the View Menu from the drop down button in the inplace cross reference view |
| - Select the 'Filters...' button |
| - In the presented dialog, check the 'declared on' checkbox and click OK |
| - The inplace cross reference view should now have a tree like this: |
| |
| (C) Display1 |
| |- paintObjects(Graphics) |
| | |- method-call(... |
| | |->> advised by |
| | |- Coordinator.before():... |
| | |- Coordinator.after():... |
| |- (A) SpaceObjectPainting |
| |- afterReturning(Pilot) |
| |->> advises |
| |- Game: ... |
| |- Game: ... |
| |- Game: ... |
| |- Robot: ... |
| (XREF_INPLACE_30) |
| |
| - Bring up the View Menu from the drop down button in the inplace cross reference view |
| - Select the 'Filters...' button |
| - In the presented dialog, uncheck the 'declared on' checkbox and click OK |
| - The inplace cross reference view should now have a tree like the one checked in (XREF_INPLACE_28). |
| (XREF_INPLACE_31) |
