| ############################################################################### | |
| # Copyright (c) 2000, 2016 QNX Software Systems and others. | |
| # | |
| # This program and the accompanying materials | |
| # are made available under the terms of the Eclipse Public License 2.0 | |
| # which accompanies this distribution, and is available at | |
| # https://www.eclipse.org/legal/epl-2.0/ | |
| # | |
| # SPDX-License-Identifier: EPL-2.0 | |
| # | |
| # Contributors: | |
| # QNX Software Systems - Initial API and implementation | |
| # IBM Corporation | |
| # Patrick Chuong (Texas Instruments) - Pin and Clone Supports (Bug 331781) | |
| # Dobrin Alexiev (Texas Instruments) - initial API and implementation (bug 336876) | |
| # Marc Khouzam (Ericsson) - Added support for connect command (Bug 365601) | |
| # Marc Dumais (Ericsson) - Added support for reverse debug action (Bug 365776) | |
| # Alvaro Sanchez-Leon (Ericsson AB) - Support for Step into selection (bug 244865) | |
| # Marc Khouzam (Ericsson) - Added dynamic printf support (Bug 400628) | |
| # Jonah Graham (Kichwa Coders) - Create "Add Line Breakpoint (C/C++)" action (Bug 464917) | |
| # Intel Corporation - Added Reverse Debugging BTrace support | |
| ############################################################################### | |
| pluginName=C/C++ Development Tools Debugger UI | |
| providerName=Eclipse CDT | |
| MemoryView.name=Memory | |
| SignalsView.name=Signals | |
| ExecutablesView.name=Executables | |
| CDebuggerPage.name=C Debugger UI Page | |
| MemoryPreferencePage.name=Memory View | |
| CDebugPreferencePage.name=Debug | |
| SourcePreferencePage.name=Source Lookup Path | |
| BreakpointActionPage.name=Breakpoint Action UI Page | |
| RunMenu.label=&Run | |
| DebugActionSet.label=C/C++ Debug | |
| ToggleInstructionStepModeAction.label=Instruction Stepping Mode | |
| ToggleInstructionStepModeAction.tooltip=Instruction Stepping Mode | |
| ShowDebuggerConsoleAction.label=Show Debugger Console | |
| ShowDebuggerConsoleAction.tooltip=Show Debugger Console On Target Selection | |
| AddBreakpoint.label=Toggle Brea&kpoint | |
| AddBreakpointInteractive.label=&Add Breakpoint... | |
| AddDynamicPrintfInteractive.label=Add &Dynamic-Printf... | |
| EnableBreakpoint.label=&Toggle Breakpoint Enabled | |
| BreakpointProperties.label=Breakpoint P&roperties... | |
| RulerBreakpointProperties.label=Breakpoint P&roperties... | |
| BreakpointPropertiesCommand.name=C/C++ Breakpoint Properties | |
| BreakpointPropertiesCommand.description=View and edit properties for a given C/C++ breakpoint | |
| ManageFunctionBreakpointAction.label=Toggle Breakpoint | |
| ManageFunctionBreakpointAction.tooltip=Toggle Function/Method Breakpoint | |
| ToggleWatchpointAction.label=Toggle Watchpoint | |
| ToggleWatchpointAction.tooltip=Toggle Variable Watchpoint | |
| BreakpointPropertiesAction.label=P&roperties... | |
| AddExpressionAction.label=Add Watch Expression... | |
| RunToLineAction.label=Run to &Line | |
| ResumeAtLineAction.label=Resume at Li&ne | |
| MoveToLineAction.label=&Move to Line\u0020 | |
| GlobalResumeAtLineAction.label=Resume at Li&ne (C/C++) | |
| GlobalMoveToLineAction.label=Move to Line (C/C++) | |
| ShowFullPathsAction.label=Show Full &Paths | |
| ShowFullPathsAction.tooltip=Show Full Paths | |
| AddWatchpoint.label=Add Watchpoint (C/C++)... | |
| AddWatchpoint.tooltip=Add Watchpoint (C/C++) | |
| AddEventBreakpoint.label=Add Event Breakpoint (C/C++)... | |
| AddEventBreakpoint.tooltip=Add Event Breakpoint (C/C++) | |
| AddFunctionBreakpoint.label=Add Function Breakpoint (C/C++)... | |
| AddFunctionBreakpoint.tooltip=Add Function Breakpoint (C/C++) | |
| AddLineBreakpoint.label=Add Line Breakpoint (C/C++)... | |
| AddLineBreakpoint.tooltip=Add Line Breakpoint (C/C++) | |
| AddGlobalsAction.label=Add Global Variables... | |
| AddGlobalsAction.tooltip=Add Global Variables | |
| RemoveGlobalsAction.label=Remove Global Variables | |
| RemoveGlobalsAction.tooltip=Remove Selected Global Variables | |
| RemoveAllGlobalsAction.label=Remove All Global Variables | |
| RemoveAllGlobalsAction.tooltip=Remove All Global Variables | |
| CVariableFormatMenu.label=Format | |
| HexVariableFormatAction.label=Hexadecimal | |
| DecVariableFormatAction.label=Decimal | |
| NaturalVariableFormatAction.label=Default | |
| BinaryVariableFormatAction.label=Binary | |
| CDebugActionGroup.name=C/C++ Debug | |
| LoadSymbolsAction.label=Load Symbols | |
| LoadSymbolsAction.tooltip=Load Modules' Symbols | |
| LoadSymbolsForAllAction.label=Load Symbols For All | |
| LoadSymbolsForAllAction.tooltip=Load Symbols For All Modules | |
| SignalAction.label=Resume With Signal | |
| SignalAction.tooltip=Resume With Signal | |
| SignalPropertiesAction.label=Signal Properties... | |
| SignalPropertiesAction.tooltip=Open Signal Properties Dialog | |
| CastToTypeAction.label=Cast To Type... | |
| CastToTypeAction.tooltip=Cast Variable To Type | |
| RestoreDefaultTypeAction.label=Restore Original Type | |
| RestoreDefaultTypeAction.tooltip=Restore Original Type Of Variable | |
| CastToArrayAction.label=Display As Array... | |
| CastToArrayAction.tooltip=Display Variable As Array | |
| DefaultSourceLocator.name=Default C/C++ Source Locator | |
| OldDefaultSourceLocator.name=Default C/C++ Source Locator (old) | |
| BreakpointMarkerPreference.label=Breakpoints | |
| DebugPresentation.label=C/C++ Debug Appearance | |
| # new disassembly | |
| DisassemblyCategory.name = Disassembly | |
| DisassemblyCategory.description = Category for disassembly commands | |
| OpenDisassembly.name = Open Disassembly | |
| OpenDisassembly.description = Open disassembly window\u0020 | |
| OpenDisassembly.label = Open Disassembly | |
| OpenDisassembly.tooltip = Open disassembly window | |
| DisassemblyEditor.name = Disassembly | |
| DisassemblyRendering.name = Disassembly | |
| DisassemblyPreferencePage.name = Disassembly | |
| # new disassembly (end) | |
| DebugTextHover.label=Debugger | |
| DebugTextHover.description=Shows the value of the expression selected in the debug perspective. | |
| DebuggingCContext.name=Debugging C/C++ | |
| DebuggingCContext.description=Debugging C/C++ Programs | |
| CommonBreakpointPage.label=Common | |
| FilteringBreakpointPage.label=Filtering | |
| CommonSignalPage.label=Common | |
| CommonModulePage.label=Common | |
| ModulesDetailPaneFontDefinition.label=Modules View Detail Pane Text Font | |
| ModulesDetailPaneFontDefinition.description=The text font used in the detail pane of the Modules view. | |
| ModulePropertiesAction.label=Properties... | |
| ModulePropertiesAction.tooltip=Open Module Properties Dialog | |
| RegisterGroupingCategory.description=Set of commands for Register Grouping | |
| RegisterGroupingCategory.name=Register Grouping commands | |
| AddRegisterGroup.description=Adds a Register Group | |
| AddRegisterGroup.name=Add RegisterGroup | |
| AddRegisterGroup.label=Add Register Group | |
| AddRegisterGroupAction.label=Add Register Group | |
| AddRegisterGroupAction.tooltip=Add Register Group | |
| RemoveRegisterGroups.description=Removes one or more Register Groups | |
| RemoveRegisterGroups.name=Remove Register Groups | |
| RemoveRegisterGroups.label=Remove Register Groups | |
| RemoveRegisterGroupsAction.label=Remove Register Groups | |
| RemoveRegisterGroupsAction.tooltip=Remove Register Groups | |
| EditRegisterGroup.description=Edits a Register Group | |
| EditRegisterGroup.name=Edit Register Group | |
| EditRegisterGroup.label=Edit Register Group | |
| EditRegisterGroupAction.label=Edit Register Group | |
| EditRegisterGroupAction.tooltip=Edit Register Group | |
| RestoreRegisterGroups.description=Restores the Default Register Groups | |
| RestoreRegisterGroups.name=Restore Default Register Groups | |
| RestoreRegisterGroups.label=Restore Default Register Groups | |
| RestoredefaultRegisterGroupsAction.label=Restore Default Register Groups | |
| RestoredefaultRegisterGroupsAction.tooltip=Restore Default Register Groups | |
| # Import Executable | |
| importExecutableWizard.name=C/C++ Executable | |
| importExecutableWizard.description=Imports a C/C++ executable file. Will create a project and launch configuration for debugging. | |
| BreakpointActionsPage.label=Actions | |
| BreakpointActionsPrefPage.label=Breakpoint Actions | |
| SoundAction.name=Sound Action | |
| LogAction.name=Log Action | |
| ResumeAction.name=Resume Action | |
| ExternalToolAction.name=External Tool Action | |
| ReverseDebugAction.name=Reverse Debug Action | |
| CLICommandAction.name=Debugger Command Action | |
| # Breakpoint Types | |
| breapointType.label=Type | |
| breapointType.regular.label=Regular | |
| breapointType.hardware.label=Hardware | |
| breapointType.temporay.label=Temporary | |
| breapointType.hardwaretemporaty.label=Hardware Temporary | |
| CApplicationShortcut.label=Local C/C++ Application | |
| ContextualRunCApplication.description=Runs a local C/C++ application | |
| ContextualDebugCApplication.description=Debugs a local C/C++ application | |
| #Run Control commands | |
| RunControlCategory.name=Run Control Commands | |
| RunControlCategory.description=Set of commands for Run Control | |
| ResumeWithoutSignal.name=Resume Without Signal | |
| ResumeWithoutSignal.description=Resume Without Signal | |
| ResumeWithoutSignal.label=Resume Without Signal | |
| ResumeWithoutSignal.tooltip=Resume Ignoring Signal | |
| # View memory command | |
| command.viewMemory.description=View variable in memory view | |
| command.viewMemory.name=View Memory | |
| # Reverse debugging | |
| ReverseActionSet.label = Reverse Debugging | |
| ReverseDebuggingCategory.name = Reverse Debugging Commands | |
| ReverseDebuggingCategory.description = Set of commands for Reverse Debugging | |
| ReverseToggle.name = Reverse Toggle | |
| ReverseToggle.description = Toggle Reverse Debugging | |
| ReverseToggle.label = Toggle Reverse Debugging | |
| ReverseToggle.commandparam = TraceMethod | |
| ReverseResume.name = Reverse Resume | |
| ReverseResume.description = Perform Reverse Resume | |
| ReverseResume.label = Reverse Resume | |
| ReverseStepInto.name = Reverse Step Into | |
| ReverseStepInto.description = Perform Reverse Step Into | |
| ReverseStepInto.label = Reverse Step Into | |
| ReverseStepOver.name = Reverse Step Over | |
| ReverseStepOver.description = Perform Reverse Step Over | |
| ReverseStepOver.label = Reverse Step Over | |
| Uncall.name = Uncall | |
| Uncall.description = Perform Uncall | |
| Uncall.label = Uncall | |
| SoftwareTrace.label = Enable Software Reverse Debugging | |
| SoftwareTrace.description = Enable Software Reverse Debugging. Slow, but detailed. | |
| HardwareTrace.label = Enable Hardware Reverse Debugging | |
| HardwareTrace.description = Enable Hardware Reverse Debugging. Fast, but less detailed. | |
| ReverseDisable.label = Disable Reverse Debugging | |
| ReverseDisable.description = Disable Reverse Debugging | |
| # Connect command | |
| Connect.name = Connect | |
| Connect.description = Connect to a process | |
| Connect.label = Connect... | |
| Connect.tooltip = Connect to a process | |
| # Debug View layout | |
| DebugViewLayoutActionSet.label = Debug View Layout | |
| DebugViewLayoutCategory.name = Debug View Layout Commands | |
| DebugViewLayoutCategory.description = Set of commands for controlling the Debug View Layout | |
| GroupDebugContexts.name = Group | |
| GroupDebugContexts.description = Groups the selected debug contexts | |
| UngroupDebugContexts.name = Ungroup | |
| UngroupDebugContexts.description = Ungroups the selected debug contexts | |
| # Menu for selecting breakpoint toggle type | |
| BreakpointTypes.label=B&reakpoint Types | |
| # Tracepoints | |
| TracepointActionSet.label=C/C++ Tracepoints | |
| TracingCategory.description=Category for Tracing Commands | |
| TracingCategory.name=Tracing Commands | |
| StartTracing.description=Start Tracing Experiment | |
| StartTracing.name=Start Tracing\u0020 | |
| StopTracing.description=Stop Tracing Experiment | |
| StopTracing.name=Stop Tracing\u0020 | |
| SaveTraceData.description=Save Trace Data to File | |
| SaveTraceData.name=Save Trace Data\u0020 | |
| sourceNotFoundEditor.name = C/C++ Source Not Found Editor | |
| CastingCategory.description = Set of commands for displaying variables and expressions as other types or arrays. | |
| CastingCategory.name = Cast to Type or Array | |
| # Pin & Clone | |
| PinView.name = Pin to Debug Context | |
| OpenNewView.name = Open New View | |
| # Disassembly Ruler Column extension point | |
| extPoint.disassemblyRulerColumn=Disassembly Ruler Column | |
| # Debug New Executable Command | |
| DebugNewExecutable.name=Debug New Executable | |
| DebugNewExecutable.description=Debug a new executable | |
| DebugNewExecutable.label=Debug New Executable... | |
| DebugNewExecutable.tooltip=Debug a new executable | |
| # Step into selection | |
| popup.stepIntoSelection.description=Step into the current selected statement | |
| popup.stepIntoSelection.name=Step Into Selection | |
| # Debugger console view | |
| DebuggerConsoleView.name=Debugger Console | |
| GenericTarget.name=Generic Target |