| ############################################################################### |
| # Copyright (c) 2000, 2008 IBM Corporation and others. |
| # All rights reserved. This program and the accompanying materials |
| # are made available under the terms of the Eclipse Public License v1.0 |
| # which accompanies this distribution, and is available at |
| # http://www.eclipse.org/legal/epl-v10.html |
| # |
| # Contributors: |
| # IBM - Initial API and implementation |
| ############################################################################### |
| |
| # ----------- Configuration Selection Page ----------- |
| BuildPropertyPage.label.Platform=Project Type: |
| BuildPropertyPage.label.Configuration=Configuration: |
| BuildPropertyPage.label.Active=Active configuration |
| BuildPropertyPage.label.Settings=Configuration Settings |
| BuildPropertyPage.label.AddConfButton=Manage... |
| BuildPropertyPage.selection.configuration.all=All configurations |
| BuildPropertyPage.tip.platform=Select a platform for the project |
| BuildPropertyPage.tip.config=Select the configuration to edit |
| BuildPropertyPage.tip.manageconf=Manage configurations of the project |
| BuildPropertyPage.tip.remconf=Remove configurations for the platform |
| BuildPropertyPage.manage.title=Manage |
| BuildPropertyPage.error.Unknown_tree_element=Unknown type of element in tree of type {0} |
| BuildPropertyPage.error.version_low=The Managed Make project settings for this project are not available. |
| BuildPropertyPage.defaults.title=Reset Configuration Tools |
| BuildPropertyPage.defaults.message=This action will reset all of the tools in the selected configuration to their default settings.\n\nDo you want to proceed? |
| BuildPropertyPage.changes.save.title=Apply Configuration Changes |
| BuildPropertyPage.changes.save.question=You have made changes to the {0} configuration.\n\nDo you want to apply these changes before switching to the {1} configuration? |
| BuildPropertyPage.changes.save.error=The configuration changes could not be applied. |
| BuildPropertyPage.unsupported.proj=The project support is not installed on the system |
| BuildPropertyPage.unsupported.config=The configuration support is not installed on the system |
| BuildPropertyPage.config.notselected=No configurations selected |
| |
| # ----------- Managed Build Custom Wizard Page Manager Error Strings ----------- |
| MBSCustomPageManager.error0=Unknown element type |
| MBSCustomPageManager.error1=\ for extension point |
| MBSCustomPageManager.error2=Unknown child element type |
| MBSCustomPageManager.error3=\ for wizardPage element in extension point |
| MBSCustomPageManager.error4=Missing projectType ID |
| MBSCustomPageManager.error5=Missing toolchain ID |
| MBSCustomPageManager.error6=Missing nature ID |
| |
| |
| # ----------- Managed Build Preference Page ----------- |
| BuildPreferencePage.label.Settings=Workspace Settings |
| BuildPreferencePage.job.rebuild=Rebuilding the Managed Projects |
| BuildPreferencePage.apply.internal.error=An Internal error has occurred. Please check error log. |
| |
| #--------------- Resource Configuration Selection Page -------------- |
| ResourceBuildPropertyPage.defaults.title=Reset Resource Configuration Tool |
| ResourceBuildPropertyPage.defaults.message=This action will reset all options of the tool in the current resource configuration to their default settings.\n\nDo you want to proceed? |
| |
| # ----------- New Env Var Dialog ----------- |
| NewEnvVarDialog.label.name=Name |
| NewEnvVarDialog.label.value=Value |
| NewEnvVarDialog.label.delimiter=Delimiter |
| NewEnvVarDialog.label.operation=Operation |
| NewEnvVarDialog.label.operation.replace=Replace |
| NewEnvVarDialog.label.operation.prepend=Prepend |
| NewEnvVarDialog.label.operation.append=Append |
| NewEnvVarDialog.label.operation.remove=Delete |
| NewEnvVarDialog.label.value.prepend=Prepended Value |
| NewEnvVarDialog.label.value.append=Appended Value |
| NewEnvVarDialog.label.value.undef=<UNDEFINED> |
| NewEnvVarDialog.label.title.new=Define a new variable |
| NewEnvVarDialog.label.title.edit=Edit existing variable |
| NewEnvVarDialog.label.status.cannot.create=The "{0}" Variable can not be created by user |
| |
| # ----------- Macros Block ----------- |
| MacrosBlock.label.header.name=Name |
| MacrosBlock.label.header.type=Type |
| MacrosBlock.label.header.value=Value |
| MacrosBlock.label.button.new=New |
| MacrosBlock.label.button.edit=Edit |
| MacrosBlock.label.button.delete=Delete |
| MacrosBlock.label.button.check.chow.parent=Show parent context Build Variables |
| MacrosBlock.label.user.macros=User Build Variables |
| MacrosBlock.label.system.macros=System Build Variables |
| MacrosBlock.label.delete.confirm.title=Build Variable Deletion Confirmation |
| MacrosBlock.label.delete.confirm.message=Are you sure you want to delete the selected user Build Variable(s)? |
| MacrosBlock.label.delete.all.confirm.title=Build Variables Deletion Confirmation |
| MacrosBlock.label.delete.all.confirm.message=Are you sure you want to delete all user Build Variables? |
| MacrosBlock.label.value.eclipse.dynamic=<ECLIPSE DYNAMIC VARIABLE> |
| MacrosBlock.label.type.text=String |
| MacrosBlock.label.type.text.list=String List |
| MacrosBlock.label.type.path.file=File |
| MacrosBlock.label.type.path.dir=Directory |
| MacrosBlock.label.type.path.file.list=File List |
| MacrosBlock.label.type.path.dir.list=Directory List |
| MacrosBlock.label.type.path.any=Path |
| MacrosBlock.label.type.path.any.list=Path List |
| |
| # ----------- New Build Macro Dialog ----------- |
| NewBuildMacroDialog.label.value=Value: |
| NewBuildMacroDialog.label.type=Type: |
| NewBuildMacroDialog.label.type.text=String |
| NewBuildMacroDialog.label.type.text.list=String List |
| NewBuildMacroDialog.label.type.path.file=File |
| NewBuildMacroDialog.label.type.path.dir=Directory |
| NewBuildMacroDialog.label.type.path.file.list=File List |
| NewBuildMacroDialog.label.type.path.dir.list=Directory List |
| NewBuildMacroDialog.label.type.path.any=Path |
| NewBuildMacroDialog.label.type.path.any.list=Path List |
| NewBuildMacroDialog.label.browse=Browse |
| NewBuildMacroDialog.label.title.new=Define a New Build Variable |
| NewBuildMacroDialog.label.title.edit=Edit Existing Build Variable |
| NewBuildMacroDialog.label.list.title=Value of Build Variable |
| NewBuildMacroDialog.label.status.cannot.create=The "{0}" Variable can not be created by user |
| |
| # ------------Resource Configuration Selection Page |
| ResourceBuildPropertyPage.label.ActiveResource=Active Resource configuration |
| ResourceBuildPropertyPage.label.ResourceSettings=Resource Configuration settings |
| ResourceBuildPropertyPage.label.Configuration=Configuration: |
| ResourceBuildPropertyPage.label.ExcludeCheckBox= Exclude from build |
| ResourceBuildPropertyPage.selection.configuration.all=All configurations |
| ResourceBuildPropertyPage.label.ToolTree=Tools |
| ResourceBuildPropertyPage.label.ToolOptions=Options |
| ResourceBuildPropertyPage.label.NotMBSFile=The project is closed or the file is not contained within a Managed Make project. |
| ResourceBuildPropertyPage.error.version_low=The Managed Make project settings for this project are not available. |
| ResourceBuildPropertyPage.tip.excludecheck=Exclude the file from building in the selected configuration |
| ResourceBuildPropertyPage.tip.config=Select the configuration to edit |
| ResourceBuildPropertyPage.unsupported.proj=The project support is not installed on the system |
| ResourceBuildPropertyPage.unsupported.config=The configuration support is not installed on the system |
| ResourceBuildPropertyPage.config.notselected=No configurations selected |
| ResourceBuildPropertyPage.rc.non.build=Managed Build settings for this resource are not available |
| ResourceBuildPropertyPage.rc.generated=The selected resource is created by the buildfile generator |
| |
| # ----------- Languages Page |
| |
| CLanguagesPropertyPage.label.ActiveResource=Active Resource configuration |
| CLanguagesPropertyPage.label.ResourceSettings=Known languages |
| CLanguagesPropertyPage.label.ApplyToAllCheckBox=Apply changes to all configurations |
| CLanguagesPropertyPage.label.Configuration=Configuration: |
| |
| # ----------- Resource Custom Build Step Block ----------- |
| ResourceCustomBuildStepBlock.label.settings=Custom Build Steps |
| ResourceCustomBuildStepBlock.label.tool.group=Resource Custom Build Step |
| ResourceCustomBuildStepBlock.label.applicability=Custom Build Step Applicability |
| ResourceCustomBuildStepBlock.label.applicability.rule.before=Apply Custom Build Step Before Other Tools |
| ResourceCustomBuildStepBlock.label.applicability.rule.after=Apply Custom Build Step After Other Tools |
| ResourceCustomBuildStepBlock.label.applicability.rule.override=Apply Custom Build Step Overriding Other Tools |
| ResourceCustomBuildStepBlock.label.applicability.rule.disable=Disable Custom Build Step |
| ResourceCustomBuildStepBlock.label.input.filenames=Additional Input file name(s): |
| ResourceCustomBuildStepBlock.label.output.filenames=Output file name(s): |
| ResourceCustomBuildStepBlock.label.command.cmd=Command: |
| ResourceCustomBuildStepBlock.label.description.desc=Description: |
| ResourceCustomBuildStepBlock.tip.applicability=specifies how to apply the custom build step with respect to other resource configuration tools |
| ResourceCustomBuildStepBlock.tip.inputs=a semicolon separated list of additional input files for this build step. Paths are interpreted as relative to the Project directory. |
| ResourceCustomBuildStepBlock.tip.outputs=a semicolon separated list of the output files produced by this build step. Paths are interpreted as relative to the Build directory. |
| ResourceCustomBuildStepBlock.tip.command=a semicolon separated list of commands or a single command to be executed by this build step. Paths are interpreted as relative to the Build directory. |
| ResourceCustomBuildStepBlock.tip.announcement=a message to be output in the build log upon execution of this build step |
| ResourceCustomBuildStepBlock.defaults.title=Reset Resource Custom Build Step |
| ResourceCustomBuildStepBlock.defaults.message=This action will reset the resource custom build step to the default settings.\n\nDo you want to proceed? |
| |
| # ----------- Entry Dialog ----------- |
| BrowseEntryDialog.error.Folder_name_invalid = Folder name invalid |
| BrowseEntryDialog.message.file = File: |
| BrowseEntryDialog.message.directory = Directory: |
| BrowseEntryDialog.file.title.add=Add file path |
| BrowseEntryDialog.dir.title.add=Add directory path |
| BrowseEntryDialog.file.title.edit=Edit file path |
| BrowseEntryDialog.dir.title.edit=Edit directory path |
| BrowseEntryDialog.wsp.dir.dlg.title=Folder selection |
| BrowseEntryDialog.wsp.file.dlg.title=File selection |
| BrowseEntryDialog.wsp.dir.dlg.msg=Select a folder from workspace: |
| BrowseEntryDialog.wsp.file.dlg.msg=Select a file from workspace: |
| BrowseEntryDialog.wsp.file.dlg.err=The selected element is not a file. |
| BrowseEntryDialog.wsp.dir.dlg.err=The selected element is not a directory. |
| BrowseEntryDialog.fs.dir.dlg.msg=Select a folder from file system: |
| |
| # ----------- New Configuration ----------- |
| NewConfiguration.label.name=Name: |
| NewConfiguration.label.description=Description: |
| NewConfiguration.label.group=Copy settings from |
| NewConfiguration.label.copy=Default configuration: |
| NewConfiguration.label.clone=Existing configuration: |
| NewConfiguration.label.showall=Show unsupported configurations |
| NewConfiguration.label.warning=Note: The configuration name will be used as a directory name in the file system. Please ensure that it is valid for your platform. |
| NewConfiguration.error.duplicateName=A configuration named "{0}" already exists. |
| NewConfiguration.error.caseName=A configuration name that differs only in case to "{0}" exists. |
| NewConfiguration.error.invalidName=The name "{0}" is invalid. |
| |
| # ----------- Rename Configuration ----------- |
| RenameConfiguration.label.name=Name: |
| RenameConfiguration.label.description=Description: |
| RenameConfiguration.label.warning=Note: The configuration name will be used as a directory name in the file system. Please ensure that it is valid for your platform. |
| RenameConfiguration.error.duplicateName=A configuration named "{0}" already exists. |
| RenameConfiguration.error.caseName=A configuration name that differs only in case to "{0}" exists. |
| RenameConfiguration.error.invalidName=The name "{0}" is invalid. |
| |
| # ----------- Target/Config management dialog ----------------- |
| ManageConfig.label.configs=Manage Configurations |
| ManageConfig.label.rename=Rename... |
| ManageConfig.label.conversionTargetLabel=Tool chain conversion targets: |
| ManageConfig.label.convertTarget=Convert |
| ManageConfig.label.new.config.dialog=Create Configuration |
| ManageConfig.label.rename.config.dialog=Rename Configuration |
| ManageConfig.deletedialog.message=Are you sure you want to delete the "{0}" configuration? |
| ManageConfig.deletedialog.title=Confirm Delete |
| ManageConfig.tip.convert=Converts the selected configuration to use a tool chain selected in the conversion target list |
| ManageConfigDialog.1=Configuration |
| ManageConfigDialog.2=Description |
| ManageConfigDialog.3=Status |
| ManageConfigDialog.4=Set Active |
| ManageConfigDialog.5=Active |
| ManageConfigDialog.0=Manage Configurations |
| ManageConfig.tip.conversionTarget=A list of conversion targets available for the selected configuration |
| |
| # Toolchain Conversion Target confirmation Dialog |
| ConfigurationConvert.confirmdialog.message=Currently the "{0}" Configuration uses "{1}" toolchain. After conversion it will use "{2}" toolchain. Do you want to proceed? |
| ConfigurationConvert.confirmdialog.title=Confirm Configuration Conversion |
| |
| # ----------- Build Property Common ----------- |
| BuildPropertyCommon.label.title=Enter Value |
| BuildPropertyCommon.label.new=New... |
| BuildPropertyCommon.label.remove=Delete |
| BuildPropertyCommon.label.up=Up |
| BuildPropertyCommon.label.down=Down |
| BuildPropertyCommon.label.editVar=Edit... |
| BuildPropertyCommon.label.addVar=Add |
| BuildPropertyCommon.label.message=Value: |
| BuildPropertyCommon.label.browse=Browse... |
| BuildPropertyCommon.label.configs=Defined configurations: |
| |
| # ----------- Field Editors ----------- |
| Multiline.error.message=Please give correct input |
| |
| # ----------- Build Tool Settings ----------- |
| BuildToolSettingsPage.alloptions=All options: |
| BuildToolSettingsPage.tool.command=Command: |
| BuildToolSettingsPage.tool.commandLinePattern=Command\nline pattern: |
| BuildToolSettingsPage.tool.advancedSettings=Expert settings: |
| |
| # ----------- File List Control ----------- |
| FileListControl.add=Add... |
| FileListControl.delete=Delete |
| FileListControl.edit=Edit... |
| FileListControl.moveup=Move Up |
| FileListControl.movedown=Move Down |
| FileListControl.filedialog.title=Select File |
| FileListControl.dirdialog.title=Select Include Directory |
| FileListControl.dirdialog.desc=Select Include Paths |
| FileListControl.deletedialog.message=Are you sure you want to delete the selected files or directories? |
| FileListControl.deletedialog.title=Confirm Delete |
| FileListControl.editdialog.title=Edit Dialog |
| FileListControl.newdialog.title=New Dialog |
| FileListControl.button.workspace=Workspace... |
| FileListControl.button.fs=File system... |
| |
| # ----------- Property Page ---------- |
| MngMakeProjectPropertyPage.closedproject=Project Closed |
| MngMakeProjectPropertyPage.internalError=An Internal error has occurred. Please check error log. |
| |
| # Copies from org.eclipse.ui.workbench |
| showAdvanced = &Advanced >> |
| hideAdvanced = << &Advanced |
| NewFolderDialog.folderNameEmpty = Folder name must be specified |
| |
| # Project Conversion Dialog messages |
| ProjectConvert.confirmdialog.title=Confirm Project Conversion |
| ProjectConvert.confirmdialog.message=The selected project {0} will be converted. Do you want to proceed ? |
| |
| ProjectConvert.conversionErrordialog.title=Project Conversion Error |
| ProjectConvert.conversionErrordialog.message=Error has occurred during the conversion of the project {0} . |
| |
| ProjectConvert.noConverterErrordialog.title=Project Conversion Error |
| ProjectConvert.noConverterErrordialog.message=There are no converters available to convert the project {0} . |
| |
| ProjectConvert.title=Project Converters for {0} |
| PropertyMultiCfgTab.0=* This functionality is experimental * |
| PropertyMultiCfgTab.1=Enable multiple configurations setting |
| PropertyMultiCfgTab.10=Add/remove/change affected elements, do not touch others |
| PropertyMultiCfgTab.11=Replace existing string lists with string list shown to user |
| PropertyMultiCfgTab.3=String list Display mode |
| PropertyMultiCfgTab.4=Define how string lists from different configurations\nshould be combined for display, when lists are not equal |
| PropertyMultiCfgTab.6=Show common elements (conjunction) |
| PropertyMultiCfgTab.7=Show all elements except doubles (disjunction) |
| PropertyMultiCfgTab.8=String list Write mode |
| PropertyMultiCfgTab.9=Define how to save changes in string lists \nfor different configurations |
| PropertyPageDefsTab.0=Show "Manage Configurations..." button |
| PropertyPageDefsTab.1=Display "Data Hierarchy" tab |
| PropertyPageDefsTab.10=Display "Export Settings" tab |
| PropertyPageDefsTab.11=Save property dialog bounds |
| PropertyPageDefsTab.12=Save size and position |
| PropertyPageDefsTab.13=Save size only |
| PropertyPageDefsTab.14=Do not save at all |
| PropertyPageDefsTab.15=Center dialogs on screen |
| PropertyPageDefsTab.4=Display "Tool Chain Editor" tab |
| PropertyPageDefsTab.5=Discovery profiles naming rule |
| PropertyPageDefsTab.6=Show disc. page names if they are unique. Else names + profile IDs. |
| PropertyPageDefsTab.7=Show disc. page names if they are unique. Else show profile IDs. |
| PropertyPageDefsTab.8=Always show names + profile IDs |
| PropertyPageDefsTab.9=Always show profile IDs only |
| ProjectConvert.convertersList=Converters List |
| |
| ScannerConfigOptionsDialog.title=Discovery Options |
| ScannerConfigOptionsDialog.description=Set the scanner configuration discovery options for this project |
| ScannerConfigOptionsDialog.scGroup.label=Automated discovery of paths and symbols |
| ScannerConfigOptionsDialog.scGroup.enabled.button=Automate discovery of paths and symbols |
| ScannerConfigOptionsDialog.scGroup.problemReporting.enabled.button=Report path detection problems |
| ScannerConfigOptionsDialog.scGroup.selectedProfile.combo=Discovery profile: |
| ScannerConfigOptionsDialog.profile.group.label=Discovery profile options |
| ScannerConfigOptionsDialog.boProvider.parser.enabled.button=Enable build output scanner info discovery |
| ScannerConfigOptionsDialog.boProvider.open.label=Load build output from file |
| ScannerConfigOptionsDialog.boProvider.browse.button=Browse... |
| ScannerConfigOptionsDialog.boProvider.browse.openFileDialog=Build output file: |
| ScannerConfigOptionsDialog.boProvider.load.button=Load |
| ScannerConfigOptionsDialog.siProvider.parser.enabled.button=Enable generate scanner info command |
| ScannerConfigOptionsDialog.siProvider.command.label=Compiler invocation command |
| ScannerConfigOptionsDialog.siProvider.browse.button=Browse... |
| ScannerConfigOptionsDialog.siProvider.browse.runCommandDialog='gcc' command: |
| ScannerConfigOptionsDialog.siProvider.command.errorMessage=Must enter compiler invocation command |
| ScannerConfigOptionsDialog.apply.progressMessage=Setting scanner configuration discovery options... |
| ScannerConfigOptionsDialog.common.variables.button=Variables... |
| |
| ScannerConfigOptionsDialog.unsavedchanges.title=Setting C/C++ Make Project Discovery Options |
| ScannerConfigOptionsDialog.unsavedchanges.message=The C/C++ Make Project Discovery Options property page contains unsaved modifications. Do you want to save changes so that other discovery related settings can be updated? |
| ScannerConfigOptionsDialog.unsavedchanges.button.save=Apply |
| ScannerConfigOptionsDialog.unsavedchanges.button.cancel=Cancel |
| |
| ScannerConfigOptionsDialog.error.title=Error Setting Project Discovery options |
| ScannerConfigOptionsDialog.error.message=An error occurred while setting the project discovery options |
| |
| # --- DiscoveredScannerConfigurationContainerPage --- |
| DiscoveredScannerConfigurationContainerPage.title=Edit container |
| DiscoveredScannerConfigurationContainerPage.description=Manage discovered scanner configuration |
| DiscoveredScannerConfigurationContainerPage.list.title=Discovered include paths and symbol definitions |
| DiscoveredScannerConfigurationContainerPage.initialization.error.message=Error initializing Discovered paths container |
| |
| # new strings |
| |
| AbstractCPropertyTab.0=Select build variable |
| AbstractCPropertyTab.1=Variables... |
| AbstractCPropertyTab.2=This tab is not supported in multi-configuration mode |
| AbstractPage.0=Unknown element selected |
| AbstractPage.1=This file has no properties to display |
| AbstractPage.12=Manage Configurations... |
| AbstractPage.11=setProjectDescription: |
| AbstractPage.10=Cannot create resource configuration for |
| AbstractPage.13=Cannot load |
| AbstractPage.14=Cannot create page: |
| AbstractPage.15=element not initialized. |
| AbstractPage.2=This project is not a CDT project |
| AbstractPage.3=Error while accessing new configuration. <Apply> cannot work. Use <OK>. |
| AbstractPage.4=[ All configurations ] |
| AbstractPage.5=[ Multiple configurations...] |
| AbstractPage.6=Configuration: |
| AbstractPage.7=Exclude resource from build |
| AbstractPage.8=Cannot apply |
| AbstractPage.9=Internal error |
| |
| AbstractLangsListTab.0=Show built-in values |
| AbstractLangsListTab.1=Languages |
| AbstractLangsListTab.2=Export |
| AbstractLangsListTab.3=\ [exp] |
| AbstractLangsListTab.4=Unexport |
| AbstractPrefPage.0=\ Preference settings will be applied to new projects \n only when there were no toolchains selected. |
| AbstractExportTab.0=[All] |
| AbstractExportTab.1=[List] |
| AbstractExportTab.2=Create... |
| AbstractExportTab.3=Edit... |
| CLocationTab.0=Filter (empty) |
| CLocationTab.1=Filter ( |
| CLocationTab.2=, |
| CLocationTab.3=) |
| CLocationTab.4=Add Folder... |
| CLocationTab.5=Link Folder... |
| CLocationTab.6=Edit Filter... |
| CLocationTab.7=Delete |
| CLocationTab.8=<root folder> |
| CLocationSourceTab.0=Source folders on build path: |
| CLocationOutputTab.0=Output folders on build path: |
| EnvDialog.0=Name: |
| EnvDialog.1=Value: |
| EnvDialog.2=Variables |
| EnvDialog.3=Add to all configurations |
| EnvironmentTab.0=Environment variables to set |
| EnvironmentTab.1=Variable |
| EnvironmentTab.10=New variable |
| EnvironmentTab.11=Edit variable |
| EnvironmentTab.12=Variables list |
| EnvironmentTab.13=Add to all configurations |
| EnvironmentTab.14=Select variables |
| EnvironmentTab.15=Current String List DISPLAY mode. Double-click to change |
| EnvironmentTab.16=Origin |
| EnvironmentTab.17=CONJ. |
| EnvironmentTab.18=DISJ. |
| EnvironmentTab.19=DISPL mode: |
| EnvironmentTab.2=Value |
| EnvironmentTab.20=<UNDEFINED> |
| EnvironmentTab.21=REPLACE |
| EnvironmentTab.22=WRITE mode: |
| EnvironmentTab.23=Current String List WRITE mode. Double-click to change |
| EnvironmentTab.24=MODIFY |
| EnvironmentTab.3=Append variables to native environment |
| EnvironmentTab.4=Replace native environment with specified one |
| EnvironmentTab.5=Add... |
| EnvironmentTab.6=Select... |
| EnvironmentTab.7=Edit... |
| EnvironmentTab.8=Delete |
| EnvironmentTab.9=Undefine |
| IncludeTab.0=Include directories |
| IncludeTab.1=Add directory path |
| IncludeTab.2=Change directory path |
| IncludeDialog.0=Directory: |
| IncludeDialog.1=File: |
| IncludeDialog.2=Add to all configurations |
| IncludeDialog.3=Add to all languages |
| LanguagesTab.0=Content type |
| LanguagesTab.1=Language |
| LibraryPathTab.1=Add... |
| LibraryPathTab.2=Edit... |
| LibraryTab.1=Add... |
| LibraryTab.2=Edit... |
| RefsTab.0=Expand All |
| RefsTab.2=Collapse All |
| RefsTab.3=Active |
| RefsTab.4=Projects list |
| SymbolTab.0=Symbol |
| SymbolTab.1=Value |
| SymbolTab.2=Add symbol |
| SymbolTab.3=Change symbol |
| ExpDialog.0=To all configurations |
| ExpDialog.1=Save to: |
| ExpDialog.2=Languages |
| ExpDialog.3=Content types |
| ExpDialog.4=Is a workspace path |
| ExpDialog.5=Apply to all |
| ExpDialog.6=Name: |
| ExpDialog.7=Value: |
| ExpDialog.8=Name cannot be empty. |
| ExpDialog.9=The same name already exists. |
| ExpDialog.10=Value cannot be empty. |
| ConfigMultiSelectionDialog.0=Select configurations |
| ConfigMultiSelectionDialog.1=At least 2 configurations should be selected |
| SymbolDialog.0=Name: |
| SymbolDialog.1=Value: |
| ConfigDescriptionTab.0=Project Description |
| ConfigDescriptionTab.1=Configuration Description |
| ConfigDescriptionTab.2=Resource Description |
| BinaryParsTab.0=Binary parser: |
| ErrorParsTab.0=Check all |
| ErrorParsTab.1=Uncheck all |
| StructureTreeTab.0=Level: |
| StructureTreeTab.1=Maximal tree nesting |
| StructureTreeTab.2=Long |
| StructureTreeTab.3=String |
| StructureTreeTab.4=Object to view: |
| StructureTreeTab.5=Expand all |
| StructureTreeTab.6=Expand level... |
| StructureTreeTab.7=Collapse all |
| StructureTreeTab.8=Property |
| StructureTreeTab.9=Value |
| StructureTreeTab.10=Class |
| StructureTreeTab.11=Wait... |
| PrefPage_PropertyPage.0=These settings will affect behavior of CDT property pages |
| |
| CConfigWizardPage.0=Select Configurations |
| CConfigWizardPage.1=Select platforms and configurations you wish to deploy on |
| CConfigWizardPage.4=Project type: |
| CConfigWizardPage.5=Toolchains: |
| CConfigWizardPage.6=Configurations: |
| CConfigWizardPage.7=Select all |
| CConfigWizardPage.8=Deselect all |
| CConfigWizardPage.9=Edit properties after project creation |
| CConfigWizardPage.10=At least one configuration should be available. Project cannot be created. |
| CConfigWizardPage.11=At least one configuration should be selected. Please check needed configurations. |
| CConfigWizardPage.12=Use "Advanced settings" button to edit project's properties.\n\nAdditional configurations can be added after project creation.\nUse "Manage configurations" buttons either on toolbar or on property pages. |
| CConfigWizardPage.13=Advanced settings... |
| |
| CMainWizardPage.0=Project type: |
| CMainWizardPage.1=Show project types and toolchains only if they are supported on the platform |
| CMainWizardPage.10=A project with that name already exists in the workspace. |
| CMainWizardPage.2=Edit properties after project creation |
| CMainWizardPage.3=No project types available. Project cannot be created |
| CMainWizardPage.5=Cannot create ICProjectTypeHandler: |
| CMainWizardPage.6=File with specified name already exists. |
| CMainWizardPage.7=Directory with specified name already exists. |
| CMainWizardPage.8=Project name: |
| CMainWizardPage.9=Project name is empty |
| |
| ProjectContentsArea.0=Browse... |
| ProjectContentsArea.1=Use default location |
| ProjectContentsArea.2=Location: |
| ProjectContentsArea.3=Choose file system: |
| ProjectContentsArea.3=Invalid location path |
| ProjectContentsArea.4=Project contents directory must be specified |
| ProjectContentsArea.5=Select directory: |
| ProjectContentsArea.6=Project path should be absolute |
| ProjectContentsArea.7=Project path is not valid |
| ProjectContentsArea.8=Cannot create given path |
| ProjectContentsArea.9=File with given name already exists |
| StdProjectTypeHandler.0=-- Other Toolchain -- |
| StdProjectTypeHandler.2=Default |
| StdProjectTypeHandler.3=creation Make project: IBuilder is null |
| |
| CDTConfigWizardPage.0=Select configurations |
| CDTCommonProjectWizard.0=Old project will be overridden |
| CDTCommonProjectWizard.1=Existing project settings will be overridden.\nImport feature can be used instead to preserve old settings.\nOK to override ? |
| NewModelProjectWizard.0=CDT Project |
| NewModelProjectWizard.1=Create CDT project of selected type |
| NewModelProjectWizard.2=C++ Project |
| NewModelProjectWizard.3=Create C++ project of selected type |
| NewModelProjectWizard.4=C Project |
| NewModelProjectWizard.5=Create C project of selected type |
| BuildVarListDialog_0=Type: |
| BuildVarListDialog_1=Text list |
| BuildVarListDialog_2=File path |
| BuildVarListDialog_3=List of File paths |
| BuildVarListDialog_4=Directory path |
| BuildVarListDialog_5=List of Directory paths |
| BuildVarListDialog_6=Any path |
| BuildVarListDialog_7=List of any paths |
| BuildVarListDialog_8=Text |
| BuildVarListDialog.0=<not available> |
| BuildVarListDialog.1=Build variables |
| StringVariableSelectionDialog_message=&Choose a variable (? = any character, * = any string): |
| StringVariableSelectionDialog_columnDescription=&Variable Description: |
| NewCfgDialog.0= |
| NewCfgDialog.1= |
| NewCfgDialog.2=Cannot create new configuration |
| NewCfgDialog.3=-- not selected -- |
| NewCfgDialog.4=Import from projects |
| NewCfgDialog.5=Import predefined |
| CDTMainWizardPage.0=Project name cannot contain '\#' symbol |
| CDTMainWizardPage.1=Project category is selected. Expand the category and select a concrete project type |
| WorkingSetConfigAction.0=Symbols ' |
| WorkingSetConfigAction.1=Choose active configs for Working Sets |
| WorkingSetConfigAction.10=-- CURRENT -- |
| WorkingSetConfigAction.11=Config Set Name: |
| WorkingSetConfigAction.12=Configuration set already exists: |
| WorkingSetConfigAction.13=Wrong confiuration set data : |
| WorkingSetConfigAction.14=' should not be in the name |
| WorkingSetConfigAction.15=Config Set ' |
| WorkingSetConfigAction.16=' already exists \! |
| WorkingSetConfigAction.17=Configurations list |
| WorkingSetConfigAction.18=New... |
| WorkingSetConfigAction.19=Rename... |
| WorkingSetConfigAction.2=Working Sets |
| WorkingSetConfigAction.20=Save, Build and Exit |
| WorkingSetConfigAction.21=Building project |
| WorkingSetConfigAction.22=Build error |
| WorkingSetConfigAction.3=- NO WORKING SETS - |
| WorkingSetConfigAction.4=Config Sets |
| WorkingSetConfigAction.5=Projects and configurations |
| WorkingSetConfigAction.6=Update config set |
| WorkingSetConfigAction.7=Create config set |
| WorkingSetConfigAction.8=Rename config set |
| WorkingSetConfigAction.9=Delete config set |
