| ############################################################################### |
| # Copyright (c) 2014-2016 Ericsson AB and others. |
| # |
| # All rights reserved. This program and the accompanying materials are |
| # made available under the terms of the Eclipse Public License v1.0 which |
| # accompanies this distribution, and is available at |
| # http://www.eclipse.org/legal/epl-v10.html |
| # |
| # Contributors: |
| # Ericsson - Initial implementation |
| ############################################################################### |
| CompareEditorTitle=Compare {0} - {1} -- {2} |
| Patchset=Patch set |
| TypeFilterText=type filter text |
| FilterClear=Clear |
| FilterClearTooltip=Clear the filter text |
| ActiveWorkspaceRevision_0=There are unpublished drafts in review " |
| ActiveWorkspaceRevision_1=(File {0} not found in workspace) |
| AutoRebaseProcess_AlreadyUpToDate=The change is already up-to-date, the automatic rebase has been cancelled and the repository state has been reverted back to its original state. |
| AutoRebaseProcess_AutomaticallyRebasing=Automatically rebasing the patchset... |
| AutoRebaseProcess_AutoRebaseCouldNotStartFixRepo=Automatic rebase couldn't start because stashing your changes failed. Please make sure your local repository is in a state that allows stashing before running the rebase command. |
| AutoRebaseProcess_AutoRebaseFailed=Automatic local rebase failed |
| AutoRebaseProcess_AutoRebaseStarted=Automatic local rebase was started |
| AutoRebaseProcess_CheckingOutBranchToRebase=Checking out the branch to rebase |
| AutoRebaseProcess_CheckoutNewlyCreatedLocalBranch=Checkout newly created local branch... |
| AutoRebaseProcess_CommitAndPushChanges=\ Don't forget to commit and push your changes if needed\! |
| AutoRebaseProcess_CreatingNewLocalBranch=Creating new local branch... |
| AutoRebaseProcess_currentRebaseStatus=The current rebase status is : |
| AutoRebaseProcess_FailedRepoFollowingState=The automatic rebase process couldn't start because the local repository is in the following state : |
| AutoRebaseProcess_FailedRevertedBack=The autorebase process could not be initiated, the repository state has been reverted back to its original state |
| AutoRebaseProcess_FetchingRemoteBranch=Fetching remote branch... |
| AutoRebaseProcess_FetchingRemotePatchSet=Fetching remote patch set... |
| AutoRebaseProcess_FetchingTheBranches=Fetching the branches |
| AutoRebaseProcess_FollowingStepsSuccessful=The following steps were successful |
| AutoRebaseProcess_PleaseFinishOrCancelCurrentRebase=Please make sure to finish or cancel any current rebasing process before starting the automatic rebase process. |
| AutoRebaseProcess_RebaseCancelled=The automatic rebase process was cancelled\! |
| AutoRebaseProcess_RebaseConflicts=Conflicts: checkout of target HEAD failed. |
| AutoRebaseProcess_RebaseFailed=Failed; the original HEAD was restored |
| AutoRebaseProcess_RebaseFF=Fast-forward, HEAD points to the new commit. |
| AutoRebaseProcess_RebaseSuccessful=Rebase was successful, HEAD points to the new commit. |
| AutoRebaseProcess_RebaseUpToDate=Already up-to-date. |
| AutoRebaseProcess_RebasingLocally=Rebasing locally... |
| AutoRebaseProcess_RevertingSteps=Reverting steps because of failure... |
| AutoRebaseProcess_StartingTheRebaseProcess=Starting the rebase process |
| AutoRebaseProcess_StashingCurrentChanges=Stashing current changes... |
| AutoRebaseProcess_StashingLocalChanges=Stashing the local changes in stash : |
| AutoRebaseProcess_StashingTheLocalChanges=Stashing the local changes (no stash created) |
| AutoRebaseProcess_StoppedConflict=Stopped due to a conflict; must either abort or resolve or skip. |
| AutoRebaseProcess_UncommitedChanges=Uncommitted changes before rebase |
| Branch_change_Id=The branch was created from some patchset of this review but contains code you modified or rebased |
| Branch_branch_name=The branch name matches the review id and revision, but contains extra commits |
| Branch_perfect_match=This is commit you are looking for |
| BranchSelectionTableModel_title=Review previously checked-out |
| BranchSelectionTableModel_branch=Branch name |
| BranchSelectionTableModel_match=Relationship to requested code |
| BranchSelectionTableModel_new=New |
| BranchSelectionTableModel_switch=Switch |
| BranchSelectionTableModel_question=The revision {0} of review "{1}" has already been checked out in the following branches.\nYou can either switch to one of the branch listed below, or checkout the code in a new branch. |
| Revert_message=Revert "{0}".\n\nThis reverts commit {1} from review {2}. |
| EGerriTip=EGerrit Tip |
| ChangeDetailEditor_EGerriTipValue=A marker is being created for each comment. The marker is displayed in the regular editor and has quickfixes allowing you to reply or delete a comment.\nYou can also create a new comment by right clicking in the left margin of the editor and see the markers in the Marker's view under the "Gerrit comment" section, or in the Problems view.\n\nFinally, the Quickdiff feature has been activated and will allow you to see the changes since HEAD^1 in the editor's margins. |
| ChangeDetailEditor_12=. |
| ChangeDetailEditor_13=Abandon message |
| ChangeDetailEditor_14=Enter the abandon message |
| ChangeDetailEditor_16=Restore message |
| ChangeDetailEditor_17=Enter the restore message |
| ChangeDetailEditor_2=ID: |
| ChangeDetailEditor_24=D&ownload |
| ChangeDetailEditor_25=Code-Review+2 |
| ChangeDetailEditor_27=Delete |
| ChangeDetailEditor_28=Delete draft review |
| ChangeDetailEditor_29=The draft review "{0}" is about to be deleted, continue ? |
| ChangeDetailEditor_3=Subject: |
| ChangeDetailEditor_30=Input is not a ChangeDetailEditorInput |
| ChangeDetailEditor_4=Activate Comment Markers |
| ChangeDetailEditor_5=Toggle to create markers for each comment in the currently selected revision |
| ChangeDetailEditor_7=Markers for patchset |
| ChangeDetailEditor_9=Reload this change from the server. |
| ChangeDetailEditor_cherryPickBranch=Cherry pick change to a different branch |
| ChangeDetailEditor_updatingRelatedChanges=Updating opened related changes |
| CheckoutRevision_0=Checkout... |
| CheckoutRevision_1=No repository found |
| CheckoutRevision_12=Change " {0} " \ has previously been checked out in branch " {1} ".\n\n\ |
| Do you want to switch to it or create a new branch? |
| CheckoutRevision_13=Branch " {0} " has been modified since, but branch \n\ |
| " {1} " has the original code base.\n\n\ |
| Do you want to switch to it or create a new branch?\n |
| CheckoutRevision_2=Error |
| CheckoutRevision_3=Operation could not be performed |
| CheckoutRevision_4=No patchset selected |
| CherryPickDialog_0=Code Review - Cherry Pick Change to Another Branch |
| CherryPickDialog_1=Cherry Pick to Branch: |
| CherryPickDialog_2=Cherry Pick to Commit Message: |
| CherryPickDialog_3=Cherry Pick Change |
| CompareElementBase=Base: {0} ({1}) |
| CompareElementPatchSet=Patch Set {0}: {1} |
| CompareElementPatchSetWithCommitId=Patch Set {0}: {1} ({2}) |
| CompareUpperSection_0=Compare |
| CompareUpperSection_1=against |
| CompareUpperSection_PatchSet=Patch Set |
| Compare_OpenFile=Open Workspace File |
| DataConverter_0=CANNOT MERGE |
| DataConverter_4=\n\t Comment: |
| DataConverter_5=Patch Sets |
| FileDialog_title=Files from the active review |
| FileDialog_PatchSet=Files from review "{0}: {1}" patch-set {2} |
| FilesDialogDeleteFilter=Show &deleted files |
| FilesDialogCommitMessageFilter=Show Commit_&Msg |
| FilesDialogReviewedFilesFilter=Show &reviewed files |
| FilesDialogCommentedFilesFilter=Show only &commented files |
| FileInfoCompareCellLabelProvider_1=comments : |
| FileInfoCompareCellLabelProvider_2=drafts : |
| FileTableLabelProvider_0=new : |
| FileTableLabelProvider_1=comments : |
| FileTableLabelProvider_2=drafts : |
| FileTableLabelProvider_3=\ (was |
| FileTableLabelProvider_4=) |
| HistoryTabView_0=H&istory |
| MarkerMenuContribution_0=Add Gerrit comment |
| MarkerMenuContribution_1=Add a comment |
| MarkerMenuContribution_2=Enter the comment for patchset |
| MessageTabView_0=Gerrit Server |
| MessageTabView_1=Messa&ges |
| MessageTabView_10=Use this committer in a search query |
| MessageTabView_11=Use this commit id in a search query |
| MessageTabView_12=Use this change-id in a search query |
| MessageTabView_2=Cancel |
| MessageTabView_3=Save |
| MessageTabView_4=Author: |
| MessageTabView_5=Committer: |
| MessageTabView_6=Commit: |
| MessageTabView_7=Use this author in a search query |
| MessageTabView_8=Parent(s): |
| MessageTabView_9=Change-Id: |
| OpenFileProblem=EGerrit info |
| OpenFileProblemMessage=No files can be shown because there is no active review.\nTo activate a review you can either checkout a review, or check the "activate comment markers" in a review editor. |
| QueryHelpers_executingQuery=Executing query |
| QuickFixDeleteDraftComment_0=Delete draft comment |
| QuickFixDeleteDraftComment_1=Are you sure that you want to delete this draft\n\n |
| QuickFixModifyDraft_0=Modify draft |
| QuickFixModifyDraft_1=Type below to modify the draft on patchset |
| QuickFixReplyDoneToComment_0=Reply done to comment |
| QuickFixReplyDoneToComment_1=Do you want to reply 'Done' to\n\n |
| QuickFixReplyDoneToComment_2=Done |
| ReplyAction_0=Reply to the review |
| ReplyAction_1=Reply to the review |
| ReplyAction_2=This button is disabled because you are connected anonymously to |
| ReplyAction_3=. |
| ReplyAction_4=Reply to the review |
| ReplyDialog_0=Reply to comment |
| ReplyDialog_1=Enter the reply to patchset |
| ReplyDialog_2=Selecting this link will bring you to the compare file and close the reply dialog |
| ReplyHandlerTitle=Reply information |
| ReplyHandlerMessage=Select a patchset other than the Workspace or Base on the right side of the compare editor so we can determine which patchset "Reply" applies to. |
| SummaryTabView_0=Gerrit Server |
| SummaryTabView_1=De&tails |
| SummaryTabView_10=Vote Summary: |
| SummaryTabView_11=Reviewer: |
| SummaryTabView_12=Enter the email of the reviewer to add. |
| SummaryTabView_13=Included In |
| SummaryTabView_14=Branches: |
| SummaryTabView_15=Tags: |
| SummaryTabView_16=Same Topic |
| SummaryTabView_17=Related Changes |
| SummaryTabView_18=Conflicts With |
| SummaryTabView_19=Process the list of reviewers |
| SummaryTabView_2=General |
| SummaryTabView_20=Fetching possible reviewers... |
| SummaryTabView_21=\ does not identify a registered user or group |
| SummaryTabView_22=Delete reviewer |
| SummaryTabView_23=Are you sure you want to delete reviewer |
| SummaryTabView_24=? |
| SummaryTabView_25=Use this branch as a search query |
| SummaryTabView_3=Project: |
| SummaryTabView_4=Branch: |
| SummaryTabView_5=Topic: |
| SummaryTabView_6=Save |
| SummaryTabView_7=Strategy: |
| SummaryTabView_8=Updated: |
| SummaryTabView_9=Reviewers |
| UIFilesTable_0=Open Workspace file |
| UIFilesTable_1=Show File Names first |
| UIFilesTable_2=The following file(s) could not be found in the workspace: |
| UIFilesTable_3=File(s) not found |
| UIFilesTable_clearReviewedFlag=Clear all reviewed flags |
| UIUtils_EGerriTipShowAgain=Don't show this message again |
| UIUtils_0=\ (draft) |
| UIUtils_1=Me |
| UIUtils_2=\nWritten by {0} at {1} for patchset {2}.\n |
| UIUtils_3=\nThe line {0} associated with this comment has been deleted. |
| FileTabView_EGerriTipValue=You may write comments by entering text in the editor |
| DeleteDraft_Text=Delete Revision |
| DeleteDraft_Tip=Delete Draft Revision |
| DeleteDraft_Dialogue_Title=Delete draft revision |
| DeleteDraft_Dialogue_Message=The revision {0} from review "{1}" is about to be deleted, continue ? |
| SummaryTabView_26=Use this project in a search query |
| ConfictWithTableDefinition_id=ID |
| ConfictWithTableDefinition_headline=Headline |
| SameTopicTableDefinition_id=ID |
| SameTopicTableDefinition_headline=Headline |
| ShowCommentedFileAction_0=Show/hide the files without comments and drafts |
| ShowCommentedFileAction_1=Show/hide the files without comments and drafts |
| ShowFilePathAction_0=Toggle the File path layout |
| ShowFilePathAction_1=Toggle the File path layout |
| SwitchPatchAction_0=Patch set |
| RelatedChangesTableDefinition_id=ID |
| RelatedChangesTableDefinition_headline=Headline |
| RelatedChangesTableDefinition_flag=Flag |
| Revert_dialog_message=Revert commit message: |
| Revert_dialog_title=Revert merged change |
| ReviewersTableDefinition_id=ID |
| ReviewersTableDefinition_role=Role |
| FilesTableDefinition_filePath=File Path |
| FilesTableDefinition_comments=Comments |
| FilesTableDefinition_against_comments="Against" comments |
| FilesTableDefinition_size=Size |
| MergeIfNecessary=Merge if necessary |
| FastForwardOnly=Fast forward only |
| RebaseIfNecessary=Rebase if necessary |
| MergeAlways=Merge always |
| CherryPick=Cherry Pick |
| HistoryTableModel_date=Date |
| HistoryTableModel_author=Author |
| HistoryTableModel_message=Message |
| CherryPickRevision_0=Cherry-pick... |
| CherryPickRevision_1=No local repository found |
| CherryPickRevision_12=A problem occurred cherry-picking this revision. |
| CherryPickRevision_2=Error |
| CherryPickRevision_3=Operation could not be performed |
| CherryPickRevision_4=Fetching from |
| CherryPickRevision_5=A problem occurred checking out the repository |
| CherryPickRevision_6=The commit to cherry-pick could not be found. |
| CherryPickRevision_9=A problem occurred cherry-picking this revision. |
| GerritMultipleInput_11=A problem occurred while sending the changes to the gerrit server |
| QuickFixer_0=Modify draft: |
| QuickFixer_1=Delete draft: |
| QuickFixer_3=Reply to: |
| QuickFixer_5=Reply done to: |
| QuickFixReplyToComment_0=Reply to comment |
| QuickFixReplyToComment_1=You are replying to \n\n |
| NextCommentAnnotationCommandName=Next Comment |
| NextCommentAnnotationCommandTooltip=Go To Next Group of Comment Annotation |
| OpenCompareHandler_generalMessage= Open Compare with the files with the latest patch-set of the selected review. |
| OpenCompareHandler_specificMessage=Open Compare review id {0} with the files with patch-set {1} |
| PreviousCommentAnnotationCommandName=Previous Comment |
| PreviousCommentAnnotationCommandTooltip=Go To Previous Group of Comment Annotation |
| CheckoutHandler_generalMessage=Checkout the branch associated with the latest patch-set of this review. |
| CheckoutHandler_specificMessage=Checkout review id {0} with branch associated with the patch-set {1} |
| CherryPickHandler_title =Cherry Pick |
| CherryPickHandler_notAvailable=CherryPick not available for {0} |
| CherryPickHandler_generalMessage=Cherry Pick the selected commit onto the current local branch. |
| CherryPickHandler_specificMessage=Cherry Pick review id {0} patch-set {1} onto the current local branch |
| RebaseHandler_title=Rebase |
| RebaseHandler_generalMessage=Rebase the most recent patch-set. |
| RebaseHandler_specificMessage=Rebase patch-set {0} of review id {1} |
| RebaseProcess_AutomaticLocalRebase=Automatic local rebase |
| RebaseProcess_title=Code Review - Rebase Change |
| RebaseProcess_changeParent=Change parent revision (leave empty to rebase on targeted branch) |
| RebaseProcess_failed=Rebase failed |
| RebaseProcess_notPerform=Gerrit could not perform the rebase automatically on the remote server. |
| RebaseProcess_changeIsAlreadyUpToDate=Change is already up to date. |
| RebaseProcess_Changes=\ change(s) |
| RebaseProcess_CouldNotPerformRemoteRebaseNoRepo=Gerrit could not perform the rebase automatically on the remote server.\n\nIf you want to try the egerrit automatic local rebase feature, you must first import the git repository associated with the change in your workspace. |
| RebaseProcess_CreateAndCheckout=Create and checkout a local branch based on the changeset |
| RebaseProcess_FetchAppropriateBranches=Fetch the appropriate branches |
| RebaseProcess_RebaseCheckedOut=Rebase the checked out branch on top of the other branch |
| RebaseProcess_StashLocalChanges=Stash your local changes |
| RebaseProcess_TitleRebaseFailedNoRepo=Rebase failed (no local repository) |
| RebaseProcess_ToStash=\ to stash) |
| RebaseProcess_WouldYouLikeAutomaticRebase=Would you like to run the automatic local rebase process? This will |
| ReplyHandler_generalMessage=Open the Reply dialog for the latest patch-set. |
| ReplyHandler_specificMessage=Open the Reply dialog for review id {0} with the latest patch-set {1} |
| ReplyProcess_AllButtons=Reply All Previous |
| SubmitHandler_title=Submit |
| SubmitHandler_notAvailable=Submit not available for {0} |
| SubmitProcess_failed=Submit failed |
| SubmitHandler_generalMessage=Submit a patch set into a selected branch. |
| SubmitHandler_specificMessage=Submit review id {0} with patch set {1} into {2}. |
| UIHistoryTable_0=Filter out machine messages |
| UIHistoryTable_1=Filter out human messages |
| UIHistoryTable_reset=Reset all filters |
| UnsupportedInput_Text=EGerrit does not allow comments to be entered when a subset of the file is shown. Please reselect the file in the upper section of the compare editor. |
| UnsupportedInput_Title=Comparison of details not supported |
| RefreshJobName=Checking for updates in review {0}. |