| ############################################################################### |
| # Copyright (c) 2000, 2005 IBM Corporation and others. |
| # All rights reserved. This program and the accompanying materials |
| # are made available under the terms of the Eclipse Public License v1.0 |
| # which accompanies this distribution, and is available at |
| # http://www.eclipse.org/legal/epl-v10.html |
| # |
| # Contributors: |
| # IBM Corporation - initial API and implementation |
| ############################################################################### |
| PasswordManagementPreferencePage.2=When you create a CVS repository location you have the option of saving the password to disk. This page allows you to manage the stored passwords. The following CVS repository locations have saved passwords: |
| PasswordManagementPreferencePage.3=Location |
| PasswordManagementPreferencePage.4=Username |
| PasswordManagementPreferencePage.5=&Remove |
| PasswordManagementPreferencePage.6=Remove &All |
| UserValidationDialog.5=CVS Repository: |
| UserValidationDialog.6=&Save Password |
| UserValidationDialog.7=Saved passwords are stored on your computer in a file that's difficult, but not impossible, for an intruder to read. |
| details=Press the details button for more information. |
| simpleInternal=Internal error |
| internal=An internal error has occurred, consult the error log for details. |
| yes=Yes |
| no=No |
| information=Server Information |
| exception=Server Exception |
| confirmOverwriteTitle=Confirm Overwrite Project |
| confirmOverwrite=The project already exists in the workspace. Its contents will be overwritten. |
| question=Question |
| localChanges=You have local changes which you are about to overwrite. Do you wish to continue? |
| error=Error |
| cvs=CVS |
| notAvailable=Not Available |
| buildError=A build error occurred after the CVS operation completed. |
| ok=OK |
| separator=/ |
| |
| nameAndRevision={0} {1} |
| currentRevision=*{0} |
| |
| AddAction.addFailed=Error occurred during Add |
| AddAction.adding=Adding... |
| AddAction.addIgnoredTitle=Add Ignored Resource? |
| AddAction.addIgnoredQuestion=You have explicitly asked to version control one or more resources that otherwise would have been ignored. Continue? |
| |
| AddToVersionControlDialog.title=Add to CVS Version Control |
| AddToVersionControlDialog.thereIsAnUnaddedResource=There is {0} resource that is not under CVS version control. Do you want to add it? |
| AddToVersionControlDialog.thereAreUnaddedResources=There are {0} resources that are not under CVS version control. Do you want to add them? |
| |
| CheckoutAction.overlappingModuleExpansions=You have attempted to check out multiple remote modules that expand to the same local resource ''{0}''. |
| |
| AutoDefineTagsAction.defineTags = Auto-discover tags |
| |
| AvoidableMessageDialog.dontShowAgain=Don't show this again |
| |
| BranchWizard.title=Create a new CVS Branch |
| BranchWizard.errorBranching=Error Branching Resources |
| BranchWizardPage.pageDescription=Creates a new branch and a starting point version. |
| BranchWizardPage.pageDescriptionVersion=Creates a new branch based on the version in the workspace. |
| BranchWizardPage.specifyVersion=The version will provide a starting point for merging the branch back to the source branch. |
| BranchWizardPage.branchName=&Branch Name: |
| BranchWizardPage.versionName=&Version Name: |
| BranchWizardPage.startWorking=Start &working in the branch |
| BranchWizardPage.versionPrefix=Root_ |
| BranchWizard.versionNameWarning=Version name: {0} |
| BranchWizard.branchNameWarning=Branch name: {0} |
| BranchWizard.branchAndVersionMustBeDifferent=The branch name and version name must be different. |
| BranchWizard.branchNameAlreadyExists=Branch name already exists. |
| BranchWizard.versionNameAlreadyExists=Version name already exists. |
| BranchWizardPage.existingVersionsAndBranches=E&xisting Versions and Branches |
| |
| ConsolePreferencePage.consoleColorSettings=Console text color settings: |
| ConsolePreferencePage.commandColor=Command &Line: |
| ConsolePreferencePage.messageColor=&Message: |
| ConsolePreferencePage.errorColor=E&rror: |
| ConsolePreferencePage.font=Console font setting: |
| |
| CVSAction.errorTitle=Errors occurred |
| CVSAction.warningTitle=Warnings occurred |
| CVSAction.multipleProblemsMessage=Multiple problems occurred: |
| CVSAction.mixingTagsTitle=Confirm Mixing Tags |
| CVSAction.mixingTags=You are mixing tags within a project. Beware that synchronization uses the tag information associated with each resource to determine the remote resource with which the local resource is compared. \n\nThis means that the part(s) of your project that you are replacing with another tag will be synchronized with the tag ''{0}'' while other resources in the project will be synchronized with another tag. \n\nDo you wish to continue? |
| CVSAction.handlerNotEnabledTitle=Warning |
| CVSAction.handlerNotEnabledMessage=The action doesn't apply to the current selection. |
| |
| CVSAnnotateView.showFileAnnotation=CVS Annotate - {0} |
| CVSAnnotateView.viewInstructions=This view shows annotations for a file in CVS. Select a file and then choose \"Team->Show Annotation\" from the context menu. |
| |
| ShowAnnotationAction.noSyncInfo=Cannot display annotation for {0} because it doesn''t have a remote revision. |
| ShowAnnotationOperation.taskName=Fetching annotations from repository |
| ShowAnnotationOperation.0=Error opening perspective |
| ShowAnnotationOperation.1=Confirm Perspective Switch |
| ShowAnnotationOperation.2=The CVS Annotate View is associated with the {0} perspective. Do you want to switch to that perspective now? |
| ShowAnnotationOperation.4=&Remember my decision |
| |
| CVSCatchupReleaseViewer.commit=&Commit... |
| CVSCatchupReleaseViewer.update=&Update from Repository |
| CVSCatchupReleaseViewer.forceCommit=Override and Co&mmit... |
| CVSCatchupReleaseViewer.forceUpdate=Override and U&pdate |
| CVSCatchupReleaseViewer.ignore=A&dd to .cvsignore |
| CVSCatchupReleaseViewer.mergeUpdate=&Merge Changes into Local Copy |
| CVSCatchupReleaseViewer.commonFile=Common file: {0} |
| CVSCatchupReleaseViewer.commonFileRevision=Common file: {0} {1} |
| CVSCatchupReleaseViewer.noCommonFile=No common file |
| CVSCatchupReleaseViewer.noRepositoryFile=No repository file |
| CVSCatchupReleaseViewer.repositoryFile=Repository file: {0} |
| CVSCatchupReleaseViewer.repositoryFileRevision=Repository file: {0} {1} [{2}] |
| CVSCatchupReleaseViewer.workspaceFile=Workspace file: {0} |
| CVSCatchupReleaseViewer.showInHistory=Show in &Resource History |
| CVSCatchupReleaseViewer.fileDecoration={0} ({1}) |
| CVSCatchupReleaseViewer.folderDecoration={0} {1} |
| CVSCatchupReleaseViewer.confirmMerge=Mark as Mer&ged |
| CVSCatchupReleaseViewer.addAction=&Add to Version Control |
| CVSCatchupReleaseViewer.labelWithSyncKind={0} {1} |
| |
| CVSCompareEditorInput.branchLabel=<branch-{0}> |
| CVSCompareEditorInput.headLabel=<HEAD> |
| CVSCompareEditorInput.comparing=Comparing... |
| CVSCompareEditorInput.different=Cannot compare resources of different kind. |
| CVSCompareEditorInput.inBranch={0} in {1} |
| CVSCompareEditorInput.inHead={0} in HEAD |
| CVSCompareEditorInput.0=File is new |
| CVSCompareEditorInput.1=File has been deleted |
| CVSCompareEditorInput.repository=Repository: {0} {1} |
| CVSCompareEditorInput.titleAncestor=Compare {0} {1}-{2} and {3} |
| CVSCompareEditorInput.titleNoAncestor=Compare {0} {1} and {2} |
| CVSCompareEditorInput.titleNoAncestorDifferent=Compare {0} {1} and {2} {3} |
| CVSCompareEditorInput.workspace=Workspace: {0} |
| CVSCompareEditorInput.workspaceLabel=<workspace> |
| CVSCompareEditorInput.noWorkspaceFile=No workspace file |
| CVSCompareEditorInput.noRepositoryFile=No repository file |
| |
| CVSCompareRevisionsInput.addToWorkspace=Get |
| CVSCompareRevisionsInput.compareResourceAndVersions=Revisions of ''{0}'' |
| CVSCompareRevisionsInput.errorReplacingTitle=Unable to Replace |
| CVSCompareRevisionsInput.errorReplacingMessage=Resource(s) could not be loaded. A communication error may have occurred, or \ |
| the resource(s) may not exist on the server, or you may \ |
| not have permission to access them. |
| CVSCompareRevisionsInput.repository=Repository file: {0} |
| CVSCompareRevisionsInput.structureCompare=Structure Compare |
| CVSCompareRevisionsInput.workspace=Workspace file: {0} |
| CVSCompareRevisionsInput.truncate={0}[...] |
| |
| CVSDecorator.projectDecoration={0} [{1}] |
| |
| CVSDecoratorPreferencesPage.0=Select the &variables to add to the decoration format: |
| CVSDecoratorPreferencesPage.1=Add Variables |
| CVSDecoratorPreferencesPage.2=O&utgoing changes |
| CVSDecoratorPreferencesPage.3=Re&mote resources |
| CVSDecoratorPreferencesPage.4=Added &resources |
| CVSDecoratorPreferencesPage.5=&New resources |
| CVSDecoratorPreferencesPage.6=I&con Decorations |
| CVSDecoratorPreferencesPage.7=File &Decoration: |
| CVSDecoratorPreferencesPage.8=Add &Variables... |
| CVSDecoratorPreferencesPage.9=F&older Decoration: |
| CVSDecoratorPreferencesPage.10=Add Varia&bles... |
| CVSDecoratorPreferencesPage.11=&Project Decoration: |
| CVSDecoratorPreferencesPage.12=Add Variable&s... |
| CVSDecoratorPreferencesPage.13=Di&rty flag: |
| CVSDecoratorPreferencesPage.14=Added f&lag: |
| CVSDecoratorPreferencesPage.15=Te&xt Decorations |
| CVSDecoratorPreferencesPage.16=C&ompute deep outgoing state for folders |
| CVSDecoratorPreferencesPage.17=Disabling this will improve decorator performance. |
| CVSDecoratorPreferencesPage.18=Enable &font and color decorations |
| CVSDecoratorPreferencesPage.19=org.eclipse.ui.preferencePages.ColorsAndFonts |
| CVSDecoratorPreferencesPage.20=See ''{0}'' to configure the font and color decorations. |
| CVSDecoratorPreferencesPage.21=&General |
| CVSDecoratorPreferencesPage.22=name of the resource being decorated |
| CVSDecoratorPreferencesPage.23=the tag applied to the resource |
| CVSDecoratorPreferencesPage.24=keyword subsitution rule for the resource |
| CVSDecoratorPreferencesPage.25=last revision loaded into workspace |
| CVSDecoratorPreferencesPage.26=flag indicating that the file has outgoing changes |
| CVSDecoratorPreferencesPage.27=flag indicating that the file has been added to the server |
| CVSDecoratorPreferencesPage.28=name of the resource being decorated |
| CVSDecoratorPreferencesPage.29=the tag applied to the resource (version, branch, or date) |
| CVSDecoratorPreferencesPage.30=the repository location's hostname |
| CVSDecoratorPreferencesPage.31=the connection method (e.g. pserver, ssh) |
| CVSDecoratorPreferencesPage.32=user name for the connection |
| CVSDecoratorPreferencesPage.33=repository home directory on server |
| CVSDecoratorPreferencesPage.34=root relative directory |
| CVSDecoratorPreferencesPage.35=flag indicating that the folder has a child resource with outgoing changes |
| |
| CVSDecorator.projectDecorationWithTag={0} [{1} {2}] |
| CVSDecorator.fileDecorationWithTag={0} [{1}:{2}] |
| CVSDecorator.fileDecorationNoTag={0} [{1}] |
| CVSDecorator.folderDecoration={0} [{1}] |
| |
| CVSFilePropertiesPage.ignored=The file is ignored by CVS. |
| CVSFilePropertiesPage.notManaged=The file is not managed by CVS. |
| CVSFilePropertiesPage.isAdded=This file has been added to CVS control but has not been committed |
| CVSFilePropertiesPage.baseRevision=Base revision: |
| CVSFilePropertiesPage.baseTimestamp=Base timestamp: |
| CVSFilePropertiesPage.dirty=Dirty: |
| CVSFilePropertiesPage.modified=Modified: |
| CVSFilePropertiesPage.keywordMode=Keyword mode: |
| CVSFilePropertiesPage.tag=Tag: |
| CVSFilePropertiesPage.none=HEAD |
| CVSFilePropertiesPage.version={0} (Version) |
| CVSFilePropertiesPage.branch={0} (Branch) |
| CVSFilePropertiesPage.date={0} (Date) |
| CVSFilePropertiesPage.error=An error occurred while creating this page. |
| CVSFilePropertiesPage.permissions=Permissions: |
| CVSFilePropertiesPage.notAvailable=Not Available |
| |
| CVSFolderPropertiesPage.ignored=The folder is ignored by CVS. |
| CVSFolderPropertiesPage.notManaged=The folder is not managed by CVS. |
| CVSFolderPropertiesPage.notCVSFolder=This folder has lost its CVS sharing information. |
| CVSFolderPropertiesPage.root=Repository root: |
| CVSFolderPropertiesPage.repository=Repository path: |
| CVSFolderPropertiesPage.static=Static: |
| CVSFolderPropertiesPage.disconnect=&Disconnect... |
| CVSFolderPropertiesPage.disconnectTitle=Disconnect folder? |
| CVSFolderPropertiesPage.disconnectQuestion=Disconnecting the folder from CVS control will delete the CVS synchronization information for the folder. Are you sure you want to disconnect? |
| |
| CVSLocalCompareEditorInput.title=CVS Compare [{0}] |
| |
| CVSOperationCancelledException.operationCancelled=Operation Cancelled |
| |
| CVSPropertiesPage.connectionType=&Connection type: |
| CVSPropertiesPage.user=&User: |
| CVSPropertiesPage.password=&Password: |
| CVSPropertiesPage.host=&Host: |
| CVSPropertiesPage.port=Port: |
| CVSPropertiesPage.path=Repository p&ath: |
| CVSPropertiesPage.module=Module: |
| CVSPropertiesPage.defaultPort=Default |
| CVSPropertiesPage.tag=Tag: |
| CVSPreferencesPage.0=0 (disabled) |
| CVSPreferencesPage.1=1 |
| CVSPreferencesPage.2=2 |
| CVSPreferencesPage.3=3 |
| CVSPreferencesPage.4=4 |
| CVSPreferencesPage.5=5 |
| CVSPreferencesPage.6=6 |
| CVSPreferencesPage.7=7 |
| CVSPreferencesPage.8=8 |
| CVSPreferencesPage.9=9 (highest compression) |
| CVSPreferencesPage.10=None |
| CVSPreferencesPage.11=Yes |
| CVSPreferencesPage.12=No |
| CVSPreferencesPage.13=Prompt |
| CVSPreferencesPage.14=&General |
| CVSPreferencesPage.15=&Validate server version compatibility on first connection |
| CVSPreferencesPage.16=Confirm &move tag on tag operation |
| CVSPreferencesPage.17=&Display detailed protocol output to stdout (for debugging purposes) |
| CVSPreferencesPage.18=R&efresh tags when comparing or replacing tags |
| CVSPreferencesPage.19=&Connection |
| CVSPreferencesPage.23=C&onnection timeout: |
| CVSPreferencesPage.24=Timeout must be positive |
| CVSPreferencesPage.25=The timeout must be a number |
| CVSPreferencesPage.26=&Quietness level: |
| CVSPreferencesPage.27=Verbose |
| CVSPreferencesPage.28=Somewhat quiet |
| CVSPreferencesPage.29=Very quiet |
| CVSPreferencesPage.20=Maximum &number of files displayed when committing: |
| CVSPreferencesPage.21=Maximum files displayed must be positive |
| CVSPreferencesPage.22=Maximum files displayed must be a number |
| CVSPreferencesPage.30='Very Quiet' mode is dangerous |
| CVSPreferencesPage.31=In 'Very Quiet' mode, some cvs servers may not communicate important information about errors that have occurred. You may want to consider using 'Somewhat quiet' mode instead. |
| CVSPreferencesPage.32=Compre&ssion: |
| CVSPreferencesPage.33=&Files and Folders |
| CVSPreferencesPage.34=&Treat all new files as binary |
| CVSPreferencesPage.35=Con&vert text files to use platform line ending |
| CVSPreferencesPage.36=P&rune empty directories |
| CVSPreferencesPage.37=&Delete unmanaged resources on replace |
| CVSPreferencesPage.38=Default te&xt mode: |
| CVSPreferencesPage.39=&Prompting |
| CVSPreferencesPage.40=A&llow empty commit comments |
| CVSPreferencesPage.41=A&utomatically save dirty editors before CVS operations |
| CVSPreferencesPage.42=S&witch perspective after a 'Show Annotations' operation |
| CVSPreferencesPage.43=D&efault perspective for 'Show Annotations': |
| CVSPropertiesPage.update=Change &Tag... |
| CVSPropertiesPage.virtualModule=<no corresponding remote folder> |
| |
| |
| CVSRemoteFilePropertySource.name=Name |
| CVSRemoteFilePropertySource.revision=Revision |
| CVSRemoteFilePropertySource.date=Date |
| CVSRemoteFilePropertySource.author=Author |
| CVSRemoteFilePropertySource.comment=Comment |
| CVSRemoteFilePropertySource.tag=Tag |
| |
| CVSRemoteFolderPropertySource.name=Name |
| CVSRemoteFolderPropertySource.tag=Tag |
| CVSRemoteFolderPropertySource.none=(none) |
| |
| CVSRepositoryLocationPropertySource.default=Default |
| CVSRepositoryLocationPropertySource.host=Host |
| CVSRepositoryLocationPropertySource.user=User |
| CVSRepositoryLocationPropertySource.port=Port |
| CVSRepositoryLocationPropertySource.root=Root |
| CVSRepositoryLocationPropertySource.method=Connection Method |
| |
| CVSSyncCompareInput.confirmMergeMessageTitle=Information |
| CVSSyncCompareInput.confirmMergeMessage=Your changes have been saved. When you are finished, \ |
| select 'Mark as Merged' to make this file an outgoing change. |
| CVSSyncCompareInput.projectDeleted=Project ''{0}'' has been deleted locally and cannot be synchronized. |
| CVSSyncCompareInput.filteringOutgoingChanges=Accumulating resources with outgoing changes |
| |
| CVSSyncSet.conflicts={0} conflicts, |
| CVSSyncSet.incomings={0} incoming change(s), |
| CVSSyncSet.noConflicts=No conflicts, |
| CVSSyncSet.noIncomings=no incoming changes, |
| CVSSyncSet.noOutgoings=no outgoing changes, |
| CVSSyncSet.outgoings={0} outgoing change(s), |
| CVSSyncSet.noNew=no new resources. |
| CVSParticipant.0=Remote File ({0} - {1}) |
| CVSParticipant.1=Common Ancestor ({0} - {1}) |
| CVSParticipant.2=C&VS |
| CVSSyncSet.new={0} new resource(s). |
| |
| CVSUIPlugin.refreshTitle=Refresh Resource? |
| CVSUIPlugin.refreshQuestion={0} Would you like to refresh resource ''{1}''? |
| CVSUIPlugin.refreshMultipleQuestion={0} Would you like to refresh the selected resources? |
| |
| CVSAction.disabledTitle=Information |
| CVSAction.disabledMessage=The chosen operation is not enabled. |
| CVSAction.refreshTitle=Refresh Project? |
| CVSAction.refreshQuestion={0} Would you like to refresh project ''{1}''? |
| CVSAction.refreshMultipleQuestion={0} Would you like to refresh the projects of the selected resources? |
| |
| CommitAction.commitFailed=Problems encountered performing commit |
| CommitWizardCommitPage.0=Commit |
| CommitWizardCommitPage.2=Enter a comment for the commit operation. |
| CommitWizardCommitPage.3=Please enter a commit comment. |
| CommitWizardCommitPage.4=Conflicting changes cannot be commited. Either exclude them from the commit or use the synchronize view to resolve the conflicts. |
| CommitWizardCommitPage.1=There are {0} changes to be committed which exceeds the display threshold of {1}. |
| CommitWizardCommitPage.5=Show &Changes |
| CommitWizardFileTypePage.0=Add Resources |
| CommitWizardFileTypePage.2=Unknown new files detected. |
| CommitWizardFileTypePage.3=New files with the following unknown names or extensions have been detected in the workspace. Please specify whether these files should be stored as text or binary and whether this decision should be remembered. |
| |
| CommitSyncAction.questionRelease=You have changes that conflict with the server. Release those changes? |
| CommitSyncAction.titleRelease=Confirm Overwrite |
| CommitSyncAction.releaseAll=Release all changes, overriding any conflicting changes on the server. |
| CommitSyncAction.releasePart=Only release the changes that don't conflict with changes on the server. |
| CommitSyncAction.cancelRelease=Cancel the release operation. |
| CommitSyncAction.errorCommitting=An error occurred while committing changes. |
| |
| CompareWithRemoteAction.compare=Error Comparing with Latest |
| CompareWithRemoteAction.noRemote=No Remote Resource |
| CompareWithRemoteAction.noRemoteLong=The selected resource has no remote resource to compare with. |
| CompareWithRemoteAction.fetching=Comparing with latest from repository... |
| |
| CompareWithRevisionAction.compare=Error Comparing with Revision |
| CompareWithRevisionAction.noRevisions=No Revisions |
| CompareWithRevisionAction.noRevisionsLong=The selected resource has no revisions to compare with. |
| CompareWithRevisionAction.fetching=Fetching revisions from repository... |
| |
| CompareWithTagAction.message=Compare With Branch or Version |
| CompareWithTagAction.replace=Error Comparing With Branch or Version |
| CompareWithTagAction.noRemote=No Remote Resource |
| CompareWithTagAction.noRemoteLong=The selected tag has no remote resource to compare with. |
| CompareWithTagAction.fetching=Fetching resources with tag {0}... |
| |
| CompareEditorInput.fileProgress=Comparing CVS file: {0} |
| |
| ConfigurationWizardAutoconnectPage.description=Your project already has CVS/ directories. It was probably previously shared, or checked out using another tool. It will be automatically shared using the following information. |
| ConfigurationWizardAutoconnectPage.user=User: |
| ConfigurationWizardAutoconnectPage.host=Host: |
| ConfigurationWizardAutoconnectPage.port=Port: |
| ConfigurationWizardAutoconnectPage.default=Default |
| ConfigurationWizardAutoconnectPage.connectionType=Connection type: |
| ConfigurationWizardAutoconnectPage.repositoryPath=Repository path: |
| ConfigurationWizardAutoconnectPage.module=Module: |
| ConfigurationWizardAutoconnectPage.validate=&Validate Connection on Finish |
| ConfigurationWizardAutoconnectPage.noSyncInfo=Could not get folder information |
| ConfigurationWizardAutoconnectPage.noCVSDirectory=Could not find CVS/ directory |
| |
| RepositorySelectionPage.description=This wizard will help you to share your files with the CVS repository for the first time. Your project will automatically be imported into the CVS repository, and the Synchronize view will open to allow you to commit your resources. |
| RepositorySelectionPage.useExisting=&Use existing repository location: |
| RepositorySelectionPage.useNew=&Create a new repository location |
| |
| ConfigurationWizardMainPage.connection=&Connection type: |
| ConfigurationWizardMainPage.userName=&User: |
| ConfigurationWizardMainPage.password=&Password: |
| ConfigurationWizardMainPage.host=&Host: |
| ConfigurationWizardMainPage.0=Location already exists. |
| ConfigurationWizardMainPage.5=The host name must not start or end with a space |
| ConfigurationWizardMainPage.1=User Name Required |
| ConfigurationWizardMainPage.2=Host Required |
| ConfigurationWizardMainPage.3=Port Required |
| ConfigurationWizardMainPage.4=Repository Path Required |
| ConfigurationWizardMainPage.useDefaultPort=Use Default P&ort |
| ConfigurationWizardMainPage.usePort=Use Por&t: |
| ConfigurationWizardMainPage.repositoryPath=&Repository path: |
| ConfigurationWizardMainPage.invalidUserName=Invalid User Name |
| ConfigurationWizardMainPage.invalidHostName=Invalid Host Name |
| ConfigurationWizardMainPage.invalidPort=Invalid Port |
| ConfigurationWizardMainPage.invalidPathWithSpaces=The repository path cannot have segments with leading or trailing spaces |
| ConfigurationWizardMainPage.invalidPathWithSlashes=The repository path cannot contain a double slash (//) |
| ConfigurationWizardMainPage.useNTFormat=Use NT path names for specifying CVSNT repository paths (e.g. C:\\cvs\\root) |
| |
| Console.copy=Copy |
| Console.selectAll=Select All |
| Console.clearOutput=Clear Output |
| Console.resultServerError={0} {1} |
| Console.resultWarnings={0} {1} |
| Console.resultException=failed due to an internal error {0} |
| Console.resultAborted=operation canceled {0} |
| Console.resultOk=ok {0} |
| Console.resultTimeFormat='(took 'm:ss.SSS')' |
| Console.couldNotFormatTime=An error occurred formatting the output time for the CVS console. |
| Console.preExecutionDelimiter=*** |
| Console.postExecutionDelimiter=*** |
| Console.info=Info: {0} |
| Console.warning=Warning: {0} |
| Console.error=Error: {0} |
| |
| AddToBranchAction.enterTag=Enter Branch Tag |
| AddToBranchAction.enterTagLong=Enter the name of the branch: |
| |
| DiffAction.diff=Diff |
| |
| FixTypeAction.fix=Fix Types |
| |
| GenerateCVSDiff.title=Create Patch |
| GenerateCVSDiff.pageTitle=Run and save CVS diff results in a file |
| GenerateCVSDiff.pageDescription=The results of the CVS diff command can be used as an input file for the Apply Patch wizard. |
| GenerateCVSDiff.overwriteTitle=Confirm Overwrite |
| GenerateCVSDiff.overwriteMsg=A file with that name already exists. Overwrite? |
| GenerateCVSDiff.error=Error running the CVS diff command |
| GenerateCVSDiff.working=Running CVS diff... |
| GenerateCVSDiff.noDiffsFoundMsg=No differences found. |
| GenerateCVSDiff.noDiffsFoundTitle=CVS diff |
| GenerateCVSDiff.1=Read-only file |
| GenerateCVSDiff.2=The specified file is read-only and cannot be overwritten. |
| GenerateCVSDiff.3=Can't write directory |
| GenerateCVSDiff.4=You don't have permission to create a file in this directory. |
| |
| GetSyncAction.questionCatchup=You have local changes which you are about to overwrite. Should the conflicting changes be added? |
| GetSyncAction.titleCatchup=Catch up Over Conflicts? |
| GetSyncAction.catchupAll=Catch up to all incoming changes, overriding any conflicting local changes. |
| GetSyncAction.catchupPart=Only catch up to the changes that don't conflict with local changes. |
| GetSyncAction.cancelCatchup=Cancel the catch up operation. |
| UpdateSyncAction.errorUpdating=An error occurred while updating changes. |
| |
| HistoryFilterDialog.title = Filter Resource History |
| HistoryFilterDialog.showMatching = Show entries matching: |
| HistoryFilterDialog.matchingAny = a&ny of the provided criteria |
| HistoryFilterDialog.matchingAll = a&ll of the provided criteria |
| HistoryFilterDialog.author = &Author: |
| HistoryFilterDialog.comment = &Comment containing: |
| HistoryFilterDialog.fromDate = &From date (M/D/Y) : |
| HistoryFilterDialog.toDate = &To date (M/D/Y) : |
| |
| HistoryView.getAnnotateAction=Show &Annotation |
| HistoryView.getContentsAction=&Get Contents |
| HistoryView.getRevisionAction=Get Sticky &Revision |
| HistoryView.tagWithExistingAction=&Tag with Existing... |
| HistoryView.copy=&Copy |
| HistoryView.revision=Revision |
| HistoryView.tags=Tags |
| HistoryView.date=Date |
| HistoryView.author=Author |
| HistoryView.comment=Comment |
| HistoryView.refreshLabel=&Refresh View |
| HistoryView.refresh=Refresh View |
| HistoryView.linkWithLabel=Link with Editor |
| HistoryView.selectAll=Select &All |
| HistoryView.showComment=Show Comment Viewer |
| HistoryView.showTags=Show Tag Viewer |
| HistoryView.title=CVS Resource History |
| HistoryView.titleWithArgument=CVS Resource History ({0}) |
| HistoryView.overwriteTitle=Overwrite local changes? |
| HistoryView.overwriteMsg=You have local changes. Do you want to overwrite them? |
| HistoryView.fetchHistoryJob=Fetching CVS revision history |
| HistoryView.fetchHistoryJobFile=Fetching CVS revision history for: {0} |
| HistoryView.errorFetchingEntries=Error fetching entries for {0} |
| |
| IgnoreAction.ignore=Error Ignoring Resource |
| |
| MergeAction.saveChangesTitle=Save Changes |
| MergeAction.saveChanges=You have unsaved changes that will be saved before the action is performed. |
| |
| MergeEditorInput.title=Merge {0} with {1} |
| |
| MergeWizard.title=Merge |
| MergeWizard.0=Select the merge points |
| MergeWizard.1=Specify the branch or version to be merged and the common base version. |
| MergeWizardPage.0=Preview the merge in the &synchronize view |
| MergeWizardPage.1=Perform the merge into the &local workspace |
| MergeWizardPage.2=&Branch or version to be merged (end tag): |
| MergeWizardPage.3=Br&owse... |
| MergeWizardPage.4=Choose End Tag |
| MergeWizardPage.5=&Select end tag |
| MergeWizardPage.6=Common base &version (start tag): |
| MergeWizardPage.7=Bro&wse... |
| MergeWizardPage.8=Choose Start Tag |
| MergeWizardPage.9=&Select start tag |
| MergeWizardPage.10=The specified end tag is not known to exist. Either enter a different tag or refresh the known tags. |
| MergeWizardPage.11=The specified start tag is not known to exist. Either enter a different tag or refresh the known tags. |
| MergeWizardPage.12=The start and end tags cannot be the same. |
| MergeWizardPage.13=A start tag is required for previewing a merge in the synchronize view. |
| MergeWizard.preparing=Preparing merge wizard |
| MergeWizard.preparingStart=Fetching tags for start page |
| MergeWizard.preparingEnd=Fetching tags for end page |
| MergeWizardEndPage.branches=Branches |
| |
| ModuleSelectionPage.moduleIsProject=Use &project name as module name |
| ModuleSelectionPage.specifyModule=Use &specified module name: |
| |
| MoveTagAction.errorMessage=Error Tagging |
| ModeWizardSelectionPage.10=Propo&se |
| ModeWizardSelectionPage.11=Automatically propose a new mode for the file based\non its name and extension. This can be configured on the\nTeam > File Content preference page. |
| ModeWizardSelectionPage.12=S&elect All |
| ModeWizardSelectionPage.13=Select &None |
| ModeWizardSelectionPage.14=Only sho&w those files |
| ModeWizardSelectionPage.15=C&lear |
| ModeWizardSelectionPage.17={0} files will be changed |
| ModeWizardSelectionPage.18=SelectionPage |
| ModeWizardSelectionPage.19=ASCII/Binary Property |
| ModeWizardSelectionPage.20=Configure the way CVS transfers your files. |
| ModeWizardSelectionPage.21=Fil&ter files by name (? = any character, * = any string) |
| ModeWizardSelectionPage.22=C&hange the ASCII/Binary property for the selected files |
| ModeWizardSelectionPage.23=For information about the different CVS ASCII/Binary modes refer to your CVS documentation. |
| ModeWizardSelectionPage.24=Enter a c&ommit comment |
| ModeWizardSelectionPage.25={0} files selected |
| |
| MoveTagAction.title=Tag with Existing Tag |
| MoveTagAction.message=&Select the tag to be moved |
| |
| NewLocationWizard.title=Add CVS Repository |
| NewLocationWizard.heading=Add a new CVS Repository |
| NewLocationWizard.description=Add a new CVS Repository to the CVS Repositories view |
| NewLocationWizard.validationFailedText=Error validating location: "{0}"\n\nKeep location anyway? |
| NewLocationWizard.validationFailedTitle=Unable to Validate |
| NewLocationWizard.exception=Unable to create repository location |
| |
| OpenLogEntryAction.deletedTitle=Resource is Deleted |
| OpenLogEntryAction.deleted=The selected revision represents a deletion. It cannot be opened. |
| |
| ReleaseCommentDialog.title=Commit |
| ReleaseCommentDialog.choosePrevious=Choose a &previously entered comment: |
| ReleaseCommentDialog.enterComment=Edit the commit &comment: |
| ReleaseCommentDialog.unaddedResources=Checked resources will be &added to CVS version control. |
| ReleaseCommentDialog.selectAll=&Select All |
| ReleaseCommentDialog.deselectAll=D&eselect All |
| ReleaseCommentDialog.clearTextArea=&Reset Comment |
| |
| RemoteFolderElement.nameAndTag={0} {1} |
| RemoteFolderElement.fetchingRemoteChildren=Fetching remote CVS children for ''{0}''... |
| |
| RemoveRootAction.removeRoot=Error Discarding Location |
| |
| ReplaceWithTagAction.message=Replace with Branch or Version |
| ReplaceWithTagAction.replace=Error Replacing With Tag |
| ReplaceWithTagAction.replacing=Replacing with tag {0} |
| ReplaceWithTagAction.mixingTags=You are mixing tags within a project. This may cause confusion \ |
| when synchronizing with the repository. Synchronize uses the tag information associated with \ |
| each resource to determine the remote resource with which the local resource is compared. \ |
| For example, with version tags, the state of the tagged resources never change so you will \ |
| not see changes made to the resources in HEAD (or other branches). Do you wish to continue? |
| |
| ReplaceWithRemoteAction.replacing=Replacing |
| ReplaceWithRemoteAction.problemMessage=Error Replacing With Latest From Repository |
| |
| ReplaceWithAction.confirmOverwrite=Confirm Overwrite |
| ReplaceWithAction.localChanges={0} has local changes which you are about to overwrite. Do you wish to overwrite? |
| ReplaceWithAction.calculatingDirtyResources=Finding outgoing changes... |
| |
| ReplaceWithLatestAction.multipleTags=&Latest from Repository |
| ReplaceWithLatestAction.multipleVersions=&Versions from Repository |
| ReplaceWithLatestAction.multipleBranches=&Latest from Branches |
| ReplaceWithLatestAction.singleVersion=&Version {0} |
| ReplaceWithLatestAction.singleBranch=&Latest from Branch {0} |
| ReplaceWithLatestAction.singleHEAD=&Latest from {0} |
| |
| RepositoryDialog.getRepository=Select a repository |
| RepositoryDialog.description=Select a repository to connect your project to |
| |
| RepositoryManager.getting=Getting |
| RepositoryManager.committing=Committing |
| RepositoryManager.updating=Updating |
| RepositoryManager.deleting=Deleting |
| RepositoryManager.adding=Adding |
| RepositoryManager.rename=An IO Exception occurred while renaming the state file |
| RepositoryManager.save=An IO Exception occurred while saving the state file |
| RepositoryManager.ioException=An IO Exception occurred while reading the state file |
| RepositoryManager.parsingProblem=An error occurred parsing file ''{0}''. |
| RepositoryManager.fetchingRemoteFolders=Fetching remote CVS folders for ''{0}''... |
| |
| RepositoriesView.refresh=&Refresh View |
| RepositoriesView.refreshTooltip=Refresh View |
| RepositoriesView.new=&Repository Location... |
| RepositoriesView.newSubmenu=&New |
| RepositoriesView.newAnonCVS=&Anonymous Repository Location to dev.eclipse.org... |
| RepositoriesView.newWorkingSet=Select Working Set... |
| RepositoriesView.deselectWorkingSet=Deselect Working Set |
| RepositoriesView.editWorkingSet=Edit Active Working Set... |
| RepositoriesView.workingSetMenuItem={0} {1} |
| RepositoriesView.collapseAll=Collapse All |
| RepositoriesView.collapseAllTooltip=Collapse All |
| RepositoriesView.NItemsSelected={0} items selected |
| RepositoriesView.OneItemSelected=1 item selected |
| RepositoriesView.ResourceInRepository={0} in {1} |
| RepositoriesView.CannotGetRevision=Cannot get revision |
| RemoteViewPart.workingSetToolTip=Working Set: {0} |
| |
| ResourcePropertiesPage.status=Status |
| ResourcePropertiesPage.notManaged=Not managed by CVS |
| ResourcePropertiesPage.versioned=versioned |
| ResourcePropertiesPage.notVersioned=not versioned |
| ResourcePropertiesPage.state=State |
| ResourcePropertiesPage.checkedOut=Checked Out |
| ResourcePropertiesPage.checkedIn=Checked In |
| #ResourcePropertiesPage.baseRevision=Base Revision |
| #ResourcePropertiesPage.none=none |
| ResourcePropertiesPage.error=Error |
| |
| KSubstWizard.title=Set Keyword Substitution |
| KSubstWizard.working=Setting keyword substitution mode... |
| KSubstWizard.problemsMessage=Problems encountered setting keyword substitution |
| KSubstWizard.errorTitle=Errors Occurred |
| KSubstWizard.warningTitle=Warnings occurred |
| |
| KSubstWizardSharedFilesPage.pageTitle=Include versioned files |
| KSubstWizardSharedFilesPage.pageDescription=\ |
| Choose to include or exclude files that are already in the repository |
| KSubstWizardSharedFilesPage.contents=\ |
| Since the keyword substitution mode attribute is not version controlled, the \ |
| change will be reflected immediately on all branches and in all revisions of \ |
| any affected files that are already shared in the repository. You should inform \ |
| all developers that they must delete and check out fresh copies of project containing the affected \ |
| files before committing new changes to the repository. You may also experience \ |
| side-effects working with earlier revisions of these files. |
| KSubstWizardSharedFilesPage.includeSharedFiles=&Include files that are already shared in the repository. |
| KSubstWizardSharedFilesPage.sharedFilesViewer.title=&The following files were selected and are already shared in the repository: |
| |
| KSubstWizardDirtyFilesPage.pageTitle=Include files with outgoing changes |
| KSubstWizardDirtyFilesPage.pageDescription=\ |
| Choose to include or exclude files with outgoing changes |
| KSubstWizardDirtyFilesPage.contents=\ |
| This operation may commit changes to files without first providing a chance to resolve \ |
| conflicts. |
| KSubstWizardDirtyFilesPage.includeDirtyFiles=&Include files that have outgoing changes. |
| KSubstWizardDirtyFilesPage.dirtyFilesViewer.title=&The following files were selected and have outgoing changes. |
| |
| KSubstWizardSelectionPage.pageTitle=Select Keyword Substitution Mode |
| KSubstWizardSelectionPage.pageDescription=\ |
| Choose the desired keyword substitution mode for the selected files. |
| KSubstWizardSelectionPage.automaticButton=&Automatic |
| KSubstWizardSelectionPage.automaticLabel=\ |
| Automatically chooses ''{0}'' or ''{1}'' \ |
| for each file according to the Team file extension preferences. |
| KSubstWizardSelectionPage.binaryButton=&Binary (-kb) |
| KSubstWizardSelectionPage.binaryLabel=\ |
| Binary files are stored in the repository without alteration.\n\ |
| CVS does not directly support conflict resolution for binary files. |
| KSubstWizardSelectionPage.textButton=A&SCII without keyword substitution (-ko) |
| KSubstWizardSelectionPage.textLabel=\ |
| End of lines are replaced with the appropriate convention for the client system.\n\ |
| CVS supports conflict resolution and differencing of ASCII files with single line granularity. |
| KSubstWizardSelectionPage.textWithSubstitutionsButton=ASCII with &keyword substitution |
| KSubstWizardSelectionPage.textWithSubstitutionsLabel=\ |
| End of lines are replaced with the appropriate convention for the client system.\n\ |
| ASCII files may contain keywords that are expanded by the CVS server during file transfers.\n\ |
| Please consult the CVS documentation for a description of the various supported keywords and modes. |
| |
| KSubstWizardCommitCommentPage.pageTitle=Enter Commit Comment |
| KSubstWizardCommitCommentPage.pageDescription=\ |
| Enter the commit comment to be used for the selected files when they are committed. |
| |
| KSubstWizardSummaryPage.pageTitle=Summary |
| KSubstWizardSummaryPage.pageDescription=\ |
| Summary of keyword substitution changes to be performed. |
| KSubstWizardSummaryPage.contents=\ |
| Click on \'Finish\' to change the keyword substitution mode of the checked files indicated below.\n\ |
| You can change the mode on a per file basis by clicking in the corresponding cell.\n\ |
| Note: Files that are not checked, or that already have the indicated mode will not be affected in any way. |
| KSubstWizardSummaryPage.showUnaffectedFiles=&Show files that already have the requested keyword substitution mode. |
| KSubstWizardSummaryPage.summaryViewer.title=&The following checked files will have their keyword substitution mode changed to the indicated value. |
| KSubstWizardSummaryPage.summaryViewer.fileHeader=File Location |
| KSubstWizardSummaryPage.summaryViewer.ksubstHeader=Keyword Substitution Mode |
| |
| SetKeywordSubstitutionAction.label=Cha&nge ASCII/Binary Property... |
| SetKeywordSubstitutionAction.tooltip=Change whether the selected resources should be treated as ASCII or binary on the CVS Server |
| |
| SharingWizard.autoConnectTitle=Connect Project to Repository |
| SharingWizard.autoConnectOneOTitle=Connect Project from Eclipse 1.0 to Repository |
| SharingWizard.autoConnectTitleDescription=Project is already configured with CVS repository information. |
| SharingWizard.couldNotImport=Remote Project Exists |
| SharingWizard.couldNotImportLong=Module ''{0}'' already exists remotely. Would you like to synchronize your local project with the existing remote module? |
| SharingWizard.selectTagTitle=Select Tag |
| SharingWizard.selectTag=&Select the tag to synchronize with: |
| SharingWizard.description=Configure a Project to Use CVS |
| SharingWizard.importTitle=Share Project with CVS Repository |
| SharingWizard.importTitleDescription=Select an existing repository location or create a new location. |
| SharingWizard.title=Share Project |
| SharingWizard.heading=Configure a Project to Use CVS |
| SharingWizard.enterInformation=Enter Repository Location Information |
| SharingWizard.enterInformationDescription=Define the location and protocol required to connect with an existing CVS repository. |
| SharingWizard.enterModuleName=Enter Module Name |
| SharingWizard.enterModuleNameDescription=Select the name of the module in the CVS repository. |
| SharingWizard.validationFailedText={0}. Set project sharing anyway? |
| SharingWizard.validationFailedTitle=Unable to Validate |
| |
| SharingWizardFinishPage.message=The wizard has all the information necessary to share your project with the CVS repository. When you click \"Finish\", the wizard will import your project into the repository and open the Synchronize view to allow you to commit your resources. |
| |
| ShowHistoryAction.showHistory=Error occurred performing Show History |
| ShowHistoryAction.noHistory=No History Available |
| ShowHistoryAction.noHistoryLong=No resource history available for selected resources. |
| |
| SyncAction.sync=Synchronize |
| SyncAction.workingSetName=Latest CVS Synchronize |
| SyncAction.noChangesTitle=No Changes |
| SyncAction.noChangesMessage=There are no changes between the workspace resource and the remote. |
| |
| TagAction.tagErrorTitle=Tagging Error |
| TagAction.tagWarningTitle=Tagging Warning |
| TagAction.tagProblemsMessage=Problems reported tagging the resource. |
| TagAction.tagProblemsMessageMultiple=Problems tagging the resources. {0} project(s) successfully tagged and {1} project(s) with errors. |
| TagAction.tagResources=Tag Resources |
| TagRefreshButtonArea.0=No Tags Found |
| TagRefreshButtonArea.1=Perform &Deep Search |
| TagRefreshButtonArea.2=Confi&gure Manually |
| TagRefreshButtonArea.3=&Cancel |
| TagRefreshButtonArea.4=Tags were not found for {0} using the auto-refresh files and a shallow cvs log operation. You can choose to search using a deep cvs log operation, to manually configure the tags or to cancel. |
| TagRefreshButtonArea.5=Refreshing tags |
| TagRefreshButtonArea.6=Refreshing tags... |
| TagRefreshButtonArea.7=No tags could be found. |
| TagRefreshButtonArea.8= |
| TagAction.enterTag=&Please enter a version tag: |
| TagAction.moveTag=&Move tag if it already exists |
| TagRootElement.0=Dates |
| TagLocalAction.0=There are uncommitted changes in ''{0}'' that will not be tagged. Should ''{0}'' be tagged? |
| TagLocalAction.1=The following contain &uncommitted changes that will not be versioned. Check those that should be included in the tag operation. |
| TagLocalAction.2=There are uncommitted changes in ''{0}'' that will not be tagged. Should the tag operation proceed? |
| TagLocalAction.4=Tag with Uncommitted Changes |
| TagAction.moveTagConfirmTitle=Confirm Move Existing Tag |
| TagAction.moveTagConfirmMessage=If the tag {0} is already used in this project, it will be moved to the selected revisions. Are you sure you want to perform the tag operation? |
| TagAction.uncommittedChangesTitle=Confirm Uncommitted Changes |
| TagAction.uncommittedChanges=You are tagging ''{0}'' that has uncommitted changes. These changes are not in the repository and will not be included in the version you are creating. Do you still want to tag this resource? |
| TagAction.tagAlreadyExists=Version tag already exists. |
| TagAction.existingVersions=Existing Versions |
| |
| TagInRepositoryAction.tagProblemsMessage=Problems reported tagging the resource. |
| TagInRepositoryAction.tagProblemsMessageMultiple=Problems tagging the resources. {0} resource(s) successfully tagged and {1} resource(s) with errors. |
| |
| UpdateAction.update=Problems encountered performing update |
| UpdateAction.updating=Updating... |
| UpdateAction.promptForUpdateSeveral=Are you sure you want to update {0} resources? |
| UpdateAction.promptForUpdateOne=Are you sure you want to update {0} resource? |
| UpdateAction.promptForUpdateTitle=Confirm Update |
| |
| UpdateWizard.title=Update |
| UpdateWizard.0=Select Tag |
| UpdateWizard.1=Select the tag for the update |
| UpdateWizard.updatePage=Update Options |
| UpdateWizardPage.description=Select other options for the update |
| |
| UserValidationDialog.required=Password Required |
| UserValidationDialog.labelUser={0} |
| UserValidationDialog.labelPassword={1} |
| UserValidationDialog.password=&Password: |
| UserValidationDialog.user=&User name: |
| |
| KeyboradInteractiveDialog.message=Keyboard Interactive authentication for {0} |
| KeyboardInteractiveDialog.labelRepository=Enter values for the following repository: {0} |
| |
| VersionsElement.versions=Versions |
| |
| WorkbenchUserAuthenticator.cancelled=Operation cancelled because login cancelled |
| WorkbenchUserAuthenticator.0=An attempt to prompt for user authentication information has failed. |
| WorkbenchUserAuthenticator.errorFlushing=Error occurred while flushing password for {0} |
| WorkbenchUserAuthenticator.errorSaving=Error occurred while saving password for {0} |
| |
| Unmanage.unmanaging=Disconnecting from CVS... |
| Unmanage.unmanage=Disconnect from CVS |
| Unmanage.title=Confirm Disconnect from CVS |
| Unmanage.titleN=Confirm Multiple Project Disconnect from CVS |
| Unmanage.message=Are you sure you want to disconnect CVS from ''{0}''? |
| Unmanage.messageN=Are you sure you want to disconnect CVS from these {0} projects? |
| Unmanage.option1=Do not delete the CVS meta information (e.g. CVS sub-directories). |
| Unmanage.option2=Also delete the CVS meta information from the file system. |
| Unmanage.unmanagingError=Errors occurred while disconnecting |
| |
| Unmanage.message=Are you sure you want to disconnect CVS from ''{0}''? |
| Unmanage.messageN=Are you sure you want to disconnect CVS from these {0} projects? |
| |
| Save_To_Clipboard_2=&Save to clipboard |
| Save_In_File_System_3=Sa&ve in file system |
| Browse..._4=Br&owse... |
| Save_Patch_As_5=Save Patch As |
| patch.txt_6=patch.txt |
| Save_In_Workspace_7=Save in &workspace |
| Select_a_folder_then_type_in_the_file_name__8=Select a fol&der then type in the file name: |
| Fi&le_name__9=Fi&le name: |
| Do_not_recurse_into_sub-folders_10=&Recurse into sub-folders |
| Do_not_include_new_files_in_patch_11=&Include new files in patch |
| Diff_output_format_12=Diff output format |
| Unified_(format_required_by_Compare_With_Patch_feature)_13=&Unified (format required by the Apply Patch wizard) |
| Context_14=&Context |
| Standard_15=&Standard |
| Advanced_options_19=Advanced options |
| Configure_the_options_used_for_the_CVS_diff_command_20=Configure the options used for the CVS diff command |
| |
| After_configuring_the_project__1=After configuring the project: |
| Open_the_Synchronize_view_on_the_project_2=Open the Synchronize view on the project |
| Automatically_import_the_local_resources_into_the_repository_3=Automatically import the local resources into the repository |
| Run_update_4=Run update |
| Do_nothing_5=Do nothing |
| Validate_Connection_on_Finish_7=Validate Location on Finish |
| |
| TagSelectionDialog.Select_a_Tag_1=&Select a branch or version |
| TagSelectionDialog.recurseOption=Recurse into sub-&folders |
| TagSelectionDialog.0=&Add Date... |
| TagSelectionDialog.1=&Remove |
| TagSelectionDialog.2=No Tags Found |
| TagSelectionDialog.3=Perform Deep Search |
| TagSelectionDialog.4=Configure Manually |
| TagSelectionDialog.5=Cancel |
| TagSelectionDialog.6=Tags were not found for {0} using the auto-refresh files and a shallow cvs log operation. You can choose to search using a deep cvs log operation, to manually configure the tags or to cancel. |
| TagSelectionDialog.7=Refreshing tags |
| TagSelectionDialog.8=Error refreshing tags |
| |
| TagSelectionArea.0=&Matching tags: |
| TagSelectionArea.1={0}: |
| TagSelectionArea.2={0} (? = any character, * = any String): |
| TagSelectionArea.3=Select a &tag |
| TagSelectionWizardPage.0=&Use the tag currently associated with the workspace resources |
| TagSelectionWizardPage.1=&Select the tag from the following list |
| |
| UpdateSyncAction.Conflicting_changes_found_1=Conflicting changes found |
| UpdateSyncAction.You_have_local_changes_you_are_about_to_overwrite_2=You have local changes you are about to overwrite |
| UpdateSyncAction.Only_update_resources_that_can_be_automatically_merged_3=Only update resources that can be automatically merged |
| UpdateSyncAction.Update_all_resources,_overwriting_local_changes_with_remote_contents_4=Update all resources, overwriting local changes with remote contents |
| UpdateSyncAction.Overwrite_local_changes__5=Overwrite local changes? |
| UpdateSyncAction.You_have_local_changes_you_are_about_to_overwrite._Do_you_wish_to_continue__6=You have local changes you are about to overwrite. Do you wish to continue? |
| |
| ExtMethodPreferencePage_message=These variables define the external connection program to use with the \'ext\' connection method. These values should be the same as the \'ext\' CVS command-line environment variable settings. |
| ExtMethodPreferencePage_CVS_RSH=CVS_&RSH: |
| ExtMethodPreferencePage_Browse=&Browse... |
| ExtMethodPreferencePage.0=Use an &external program to connect |
| ExtMethodPreferencePage.2=Choosing to use another connection method allows the meta information in CVS projects to be compatible with external CVS tools while using a custom connection method. |
| ExtMethodPreferencePage.1=Use another &connection method type to connect |
| ExtMethodPreferencePage_Details=Select a program or script |
| ExtMethodPreferencePage_CVS_RSH_Parameters=&Parameters: |
| ExtMethodPreferencePage_Add_Variable=&Add Variable... |
| ExtMethodPreferencePage_CVS_SERVER__7=CVS_&SERVER: |
| UpdateMergeActionProblems_merging_remote_resources_into_workspace_1=Problems merging remote resources into workspace |
| UpdateMergeActionProblems_merging_remote_resources_into_workspace_2=Problems merging remote resources into workspace |
| |
| TagConfigurationDialog.1=Configure Branches and Versions for {0} |
| TagConfigurationDialog.4=Configure tags you will see in the workbench. |
| TagConfigurationDialog.5=&Browse files for tags: |
| TagConfigurationDialog.6=&New tags found in the selected files: |
| TagConfigurationDialog.7=Remembered &tags for these projects: |
| TagConfigurationDialog.8=&Add Checked Tags |
| TagConfigurationDialog.9=&Remove |
| TagConfigurationDialog.0=Add &Date... |
| TagConfigurationDialog.10=Re&move All |
| TagConfigurationDialog.11=&List of files to be automatically examined when refreshing tags: |
| TagConfigurationDialog.12=A&dd Selected Files |
| TagConfigurationDialog.13=Rem&ove |
| TagConfigurationDialog.14=Error fetching tags from remote CVS files |
| TagConfigurationDialog.20=&Refresh Tags |
| TagConfigurationDialog.21=&Configure Tags... |
| TagConfigurationDialog.22=Updating Tags |
| |
| ChangeListener.Deleting_CVS_folders_1=Deleting CVS folders |
| ChangeListener.Folders_cannot_be_deleted_from_a_CVS_server_from_the_client._To_delete_the_folder_2=Folders cannot be deleted from a CVS server from the client. To delete the folder |
| ChangeListener.Do_not_ask_me_about_this_again_3=Do not ask me about this again |
| ConfigureTagsFromRepoViewConfigure_Tag_Error_1=Configure Tag Error |
| RemoteRootAction.label=Discard location |
| RemoteLogOperation.0=Fetching log information from {0} |
| RemoteLogOperation.1=Fetching log information |
| RemoveDateTagAction.0=&Remove |
| RemoteRootAction.Unable_to_Discard_Location_1=Unable to Discard Location |
| RemoteRootAction.Projects_in_the_local_workspace_are_shared_with__2=Projects in the local workspace are shared with {0}. This location cannot be discarded until all local projects are disconnected from it. |
| RemoveRootAction.removeRoot_3=RemoveRootAction.removeRoot |
| RemoteRootAction.The_projects_that_are_shared_with_the_above_repository_are__4=The projects that are shared with the above repository are: |
| |
| BranchCategory.Branches_1=Branches |
| GroupedByVersionCategory.Versions_1=Versions |
| VersionCategory.Versions_1=Versions |
| ModulesCategory.label=Modules |
| HistoryView.[...]_4=[...] |
| |
| CVSProjectPropertiesPage.connectionType=Connection type: |
| CVSProjectPropertiesPage.user=User: |
| CVSProjectPropertiesPage.Select_a_Repository_1=Select a Repository |
| CVSProjectPropertiesPage.Select_a_CVS_repository_location_to_share_the_project_with__2=Select a compatible CVS repository location to share the project with: |
| CVSProjectPropertiesPage.Change_Sharing_5=&Change Sharing... |
| CVSProjectPropertiesPage.fetchAbsentDirectoriesOnUpdate=&Fetch absent or new directories when updating |
| CVSProjectPropertiesPage.configureForWatchEdit=Enable watch/edit for this project |
| CVSProjectPropertiesPage.progressTaskName=Updating project's CVS properties |
| CVSProjectPropertiesPage.setReadOnly=Setting all files read-only |
| CVSProjectPropertiesPage.clearReadOnly=Setting all files writable |
| CVSRepositoryPropertiesPage.Confirm_Project_Sharing_Changes_1=Confirm Project Sharing Changes |
| CVSPreferencePage.Save_dirty_editors_before_CVS_operations_1= |
| CVSRepositoryPropertiesPage.There_are_projects_in_the_workspace_shared_with_this_repository_2=There are projects in the workspace shared with this repository. The projects will be updated with the new information that you have entered |
| CVSRepositoryPropertiesPage.sharedProject=The projects that are shared with {0} are: |
| CVSRepositoryPropertiesPage.useDefaultProgramName=Expect the &default program name "cvs" in text message prefixes from this server |
| CVSRepositoryPropertiesPage.useProgramName=Expect a custom &program name: |
| CVSRepositoryPropertiesPage.useLocationAsLabel=Use the &repository identification string as the label |
| CVSRepositoryPropertiesPage.useCustomLabel=Use a custom &label: |
| |
| CVSProjectSetSerializer.Confirm_Overwrite_Project_8=Confirm Overwrite Project |
| CVSProjectSetSerializer.The_project_{0}_already_exists._Do_you_wish_to_overwrite_it__9=The project {0} already exists. Do you wish to overwrite it? |
| |
| IgnoreResourcesDialog.titleSingle=Add {0} to .cvsignore |
| IgnoreResourcesDialog.titleMany=Add {0} resources to .cvsignore |
| IgnoreResourcesDialog.prompt=Select what to add to the .cvsignore file(s): |
| IgnoreResourcesDialog.addNameEntryButton=Resource(s) by name |
| IgnoreResourcesDialog.addNameEntryExample=Examples: file1.so, file2.so, .rcfile, bin |
| IgnoreResourcesDialog.addExtensionEntryButton=Wildcard extension |
| IgnoreResourcesDialog.addExtensionEntryExample=Examples: *.so, *.rcfile, bin |
| IgnoreResourcesDialog.addCustomEntryButton=Custom pattern |
| IgnoreResourcesDialog.addCustomEntryExample=The wildcard characters '*' and '?' are permitted. |
| IgnoreResourcesDialog.patternMustNotBeEmpty=Pattern must not be empty. |
| IgnoreResourcesDialog.patternDoesNotMatchFile=Pattern does not match all selected resources: e.g. {0} |
| |
| ContentAction.Confirm_Long_Operation_1=Confirm Long Operation |
| ContentAction.Changing_this_setting_will_involve_contacting_the_server_and_may_be_long-running_2=Changing this setting will involve contacting the server and may be long-running |
| |
| CVSProjectPropertiesPage.You_can_change_the_sharing_of_this_project_to_another_repository_location._However,_this_is_only_possible_if_the_new_location_is___compatible___(on_the_same_host_with_the_same_repository_path)._1=You can change the sharing of this project to another repository location. However, this is only possible if the new location is \"compatible\" (on the same host with the same repository path). |
| |
| ConfigurationWizardMainPage.Location_1=Location |
| ConfigurationWizardMainPage.Authentication_2=Authentication |
| ConfigurationWizardMainPage.Connection_3=Connection |
| AlternateUserValidationDialog.Enter_Password_2=Enter Password |
| AlternateUserValidationDialog.OK_6=OK |
| AlternateUserValidationDialog.Cancel_7=Cancel |
| AlternateUserValidationDialog.message=Enter the password for {0}: |
| WorkbenchUserAuthenticator.The_operation_was_canceled_by_the_user_1=The operation was canceled by the user |
| CVSCatchupReleaseViewer.No_workspace_file_1=No workspace file |
| CVSCatchupReleaseViewer.Select_&Outgoing_Additions_1=Select New Reso&urces |
| ForceCommitSyncAction.Outgoing_Changes_Not_Added_1=Outgoing Changes Not Added |
| ForceCommitSyncAction.You_have_chosen_to_commit_new_resources_which_have_not_been_added_to_version_control._Do_you_wish_to_add_them_to_version_control_now__2=You have chosen to commit new resources which have not been added to version control. Do you wish to add them to version control now? |
| |
| WorkingSetSelectionArea.workingSetOther=&Other... |
| ListSelectionArea.selectAll=&Select All |
| ListSelectionArea.deselectAll=&Deselect All |
| |
| RestoreFromRepositoryWizard.fileSelectionPageTitle=Restore from Repository |
| RestoreFromRepositoryWizard.fileSelectionPageDescription=Select the revision of each file that should be restored. |
| RestoreFromRepositoryFileSelectionPage.fileSelectionPaneTitle={0} - Select file to be restored: |
| RestoreFromRepositoryFileSelectionPage.revisionSelectionPaneTitle={0} - Check revision to be restored: |
| RestoreFromRepositoryFileSelectionPage.fileToRestore={0} ({1} to be restored) |
| RestoreFromRepositoryFileSelectionPage.fileContentPaneTitle={0} {1} in ''{2}'' |
| RestoreFromRepositoryFileSelectionPage.emptyRevisionPane=Remote revisions of selected file: |
| RestoreFromRepositoryFileSelectionPage.fileExists=File ''{0}'' already exists locally. |
| RestoreFromRepositoryFileSelectionPage.revisionIsDeletion=Revision {0} of {1} is the deletion and can not be restored. Select another revision of this file. |
| RestoreFromRepositoryAction.noFilesTitle=No Deleted Files Found |
| RestoreFromRepositoryAction.noFilesMessage=There were no deleted files found on the repository in folder ''{0}''. |
| |
| RepositoryRoot.folderInfoMissing=Local folder ''{0}'' is not properly mapped to a remote folder. |
| |
| RepositoriesViewContentHandler.unmatchedTag=No matching end tag found for tag ''{0}'' while reading repositories View configuration file. |
| RepositoriesViewContentHandler.missingAttribute=Required attribute ''{1}'' missing from tag ''{0}'' while reading repositories View configuration file. |
| RepositoriesViewContentHandler.errorCreatingRoot=An error occurred trying to create repository ''{0}''. |
| |
| CVSWorkingSetFolderSelectionPage.projectSelectionPageTitle=CVS Working Set |
| CVSWorkingSetFolderSelectionPage.projectSelectionPageDescription=Enter a working set name and select the working set folders. |
| CVSWorkingSetFolderSelectionPage.name=&Working set name: |
| CVSWorkingSetFolderSelectionPage.treeLabel=Working &set contents: |
| CVSWorkingSetFolderSelectionPage.refresh=&Refresh Contents |
| CVSWorkingSetFolderSelectionPage.invalidWorkingSetName=The name must contain only letters and digits. |
| CVSWorkingSetFolderSelectionPage.duplicateWorkingSetName=A working set of the specific name already exists. |
| CVSWorkingSetFolderSelectionPage.mustSelectFolder=At least one folder must be checked. |
| |
| WorkingSetSelectionDialog.title= Select CVS Working Set |
| WorkingSetSelectionDialog.title.multiSelect= Select CVS Working Sets |
| WorkingSetSelectionDialog.message= &Select a CVS working set: |
| WorkingSetSelectionDialog.message.multiSelect= &Select CVS working sets: |
| WorkingSetSelectionDialog.detailsButton.label= &Edit... |
| WorkingSetSelectionDialog.newButton.label= &New... |
| WorkingSetSelectionDialog.removeButton.label= &Remove |
| |
| RefreshTagsAction.title=Refresh Branch and Version Tags? |
| RefreshTagsAction.message=Repository ''{0}'' has {1} projects to refresh. Continue? |
| |
| WatchEditPreferencePage.description=Settings for CVS Watch/Edit. |
| WatchEditPreferencePage.checkoutReadOnly=&Configure projects to use Watch/Edit on checkout |
| WatchEditPreferencePage.validateEditSaveAction=When read-only files are modified in an editor |
| WatchEditPreferencePage.edit=Send a CVS &edit notification to the server |
| WatchEditPreferencePage.highjack=Edit the file &without informing the server |
| WatchEditPreferencePage.editPrompt=Before a CVS edit notification is sent to the server |
| WatchEditPreferencePage.neverPrompt=&Never prompt |
| WatchEditPreferencePage.alwaysPrompt=Always &prompt |
| WatchEditPreferencePage.onlyPrompt=&Only prompt if there are other editors |
| |
| Uneditaction.confirmMessage=Overwrite local changes to edited files? |
| Uneditaction.confirmTitle=Confirm Unedit |
| |
| FileModificationValidator.promptTitle=CVS Edit Files? |
| FileModificationValidator.promptMessage=There are read-only files being modified. Should a 'cvs edit' be performed? |
| FileModificationValidator.vetoMessage=User vetoed file modification |
| |
| RefreshRemoteProjectWizard.title=Refresh Branches |
| RefreshRemoteProjectWizard.0=Tags not found for some modules |
| RefreshRemoteProjectWizard.1=Search Deeply |
| RefreshRemoteProjectWizard.2=Skip |
| RefreshRemoteProjectWizard.3=Tags were not found on module {0} using the auto-refresh files and a shallow cvs log operation. You can choose to search this module using a deep cvs log operation or skip it. |
| RefreshRemoteProjectWizard.4=Tags were not found on {0} modules using the auto-refresh files and a shallow cvs log operation. You can choose to search these module using a deep cvs log operation or skip them. |
| RefreshRemoteProjectSelectionPage.pageTitle=Select Projects |
| RefreshRemoteProjectSelectionPage.pageDescription=Select the remote projects whose tags should be refreshed. |
| RefreshRemoteProjectSelectionPage.selectRemoteProjects=This wizard helps discover the tags associated with one or more remote projects. &Check the projects whose tags you wish to refresh. |
| RefreshRemoteProjectSelectionPage.noWorkingSet=Do not &use a working set |
| RefreshRemoteProjectSelectionPage.workingSet=Select a &working set (matching projects will be checked): |
| |
| EditorsView.file=File name |
| EditorsView.user=User name |
| EditorsView.date=Date |
| EditorsView.computer=Computer name |
| |
| EditorsDialog.title=Editors |
| EditorsDialog.question=The resource already has editors. Do you still want to edit the resource and send a CVS edit notification to server? |
| EditorsAction.classNotInitialized={0} not initialized |
| |
| TargetLocationSelectionDialog.projectNameLabel=&Project Name: |
| TargetLocationSelectionDialog.useDefaultLabel=Use default &workspace location |
| TargetLocationSelectionDialog.locationLabel=&Location: |
| TargetLocationSelectionDialog.parentDirectoryLabel=&Directory: |
| TargetLocationSelectionDialog.browseLabel=&Browse... |
| TargetLocationSelectionDialog.messageForSingle=Select the parent directory for project {0}. |
| TargetLocationSelectionDialog.messageForMulti=Select the parent directory for the {0} projects. |
| TagetLocationSelectionDialog.locationEmpty=Project contents directory must be specified. |
| TagetLocationSelectionDialog.invalidLocation=Invalid location path. |
| TagetLocationSelectionDialog.alreadyExists=Project {0} already exists. |
| |
| SynchronizeProjectsDialog.title=Synchronize CVS Projects |
| SynchronizeProjectsDialog.selectProjects=Projects to be synchronized |
| SynchronizeProjectsDialog.syncOutgoingChanges=Only synchronize projects with outgoing &changes |
| SynchronizeProjectsDialog.allSharedProjects=Include &all projects shared with CVS |
| SynchronizeProjectsDialog.sharedWorkingSetProjects=Include &working set resources shared with CVS: |
| |
| RemoteFileEditorInput.fullPathAndRevision={0} {1} |
| |
| CheckoutOperation.thisResourceExists=The resource ''{0}'' already exists in the workspace and will be deleted. Proceed with the check out of ''{1}''? |
| CheckoutOperation.thisExternalFileExists=The folder ''{0}'' exists in the local file system and will be deleted. Proceed with the check out of ''{1}''? |
| CheckoutOperation.confirmOverwrite=Confirm Overwrite |
| CheckoutOperation.scrubbingProject=Scrubbing project ''{0}''. |
| CheckoutOperation.refreshingProject=Configuring project ''{0}''. |
| |
| CheckoutSingleProjectOperation.taskname=Checking out ''{0}'' from CVS |
| CheckoutMultipleProjectsOperation.taskName=Checking out {0} folders from CVS |
| |
| CheckoutIntoOperation.taskname=Checking out {0} folders from CVS into ''{1}'' |
| CheckoutIntoOperation.targetIsFile=Folder ''{0}'' cannot be checked out because file ''{1}'' is in the way. |
| CheckoutIntoOperation.targetIsFolder=Folder ''{0}'' cannot be checked out because folder ''{1}'' is in the way. |
| CheckoutIntoOperation.targetIsPrunedFolder=Folder ''{0}'' cannot be checked out because it conflicts with the pruned folder ''{1}''. |
| CheckoutIntoOperation.mappingAlreadyExists=Cannot checkout remote folder ''{0}'' into ''{1}'' because local folder ''{2}'' is already mapped to remote folder ''{0}''. |
| CheckoutIntoOperation.cancelled=Checkout of ''{1}'' cancelled by user. |
| CheckoutIntoOperation.overwriteMessage=Folder ''{0}'' already exists and will be deleted. Continue? |
| |
| AddToWorkspace.taskName1=Checking out ''{0}'' from CVS |
| AddToWorkspace.taskNameN=Checking out {0} folders from CVS |
| |
| CheckoutAsAction.checkoutFailed=Problems encountered performing checkout |
| |
| CheckoutAsAction.enterProjectTitle=Check Out {0} As... |
| CheckoutAsAction.enterLocationTitle=Check Out {0} Projects As... |
| CheckoutAsAction.taskname=Checking out "{0}" from CVS as "{1}" |
| CheckoutAsAction.multiCheckout=Checking out {0} projects from CVS |
| |
| CheckoutAsWizard.title=Check Out As |
| CheckoutAsWizard.error=Problems encountered performing checkout |
| CheckoutAsMainPage.title=Check Out As |
| CheckoutAsMainPage.description=Select the method of check out |
| CheckoutAsMainPage.singleFolder=Choose how to check out folder ''{0}'' |
| CheckoutAsMainPage.asConfiguredProject=Check out as a project &configured using the New Project Wizard |
| CheckoutAsMainPage.asSimpleProject=Check out as a &project in the workspace |
| CheckoutAsMainPage.projectNameLabel=&Project Name: |
| CheckoutAsMainPage.multipleFolders=Choose how to check out the {0} folders |
| CheckoutAsMainPage.asProjects=Check out into the &workspace as projects |
| CheckoutAsMainPage.intoProject=Check out &into an existing project |
| |
| CheckoutAsLocationSelectionPage.title=Check Out As |
| CheckoutAsLocationSelectionPage.description=Select the project location |
| CheckoutAsLocationSelectionPage.useDefaultLabel=Use default &workspace location |
| CheckoutAsLocationSelectionPage.locationLabel=&Location: |
| CheckoutAsLocationSelectionPage.parentDirectoryLabel=&Directory: |
| CheckoutAsLocationSelectionPage.browseLabel=&Browse... |
| CheckoutAsLocationSelectionPage.locationEmpty=Project contents directory must be specified. |
| CheckoutAsLocationSelectionPage.invalidLocation=Invalid location path. |
| CheckoutAsLocationSelectionPage.messageForSingle=Select the parent directory for project {0}. |
| CheckoutAsLocationSelectionPage.messageForMulti=Select the parent directory for the {0} projects. |
| |
| CheckoutAsProjectSelectionPage.title=Check Out Into |
| CheckoutAsProjectSelectionPage.description=Select the local folder that is the target of the checkout operation. |
| CheckoutAsProjectSelectionPage.name=Target folder &name: |
| CheckoutAsProjectSelectionPage.treeLabel=&Parent of target folder: |
| CheckoutAsProjectSelectionPage.showLabel=&Filter project list: |
| CheckoutAsProjectSelectionPage.recurse=&Checkout subfolders |
| CheckoutAsProjectSelectionPage.showAll=Show all valid target projects |
| CheckoutAsProjectSelectionPage.showUnshared=Show unshared projects |
| CheckoutAsProjectSelectionPage.showSameRepo=Show projects shared with the same repository |
| CheckoutAsProjectSelectionPage.invalidFolderName=''{0}'' is not a valid folder name |
| |
| TargetLocationSelectionDialog.projectNameLabel=&Project Name: |
| TargetLocationSelectionDialog.useDefaultLabel=Use default &workspace location |
| TargetLocationSelectionDialog.locationLabel=&Location: |
| TargetLocationSelectionDialog.parentDirectoryLabel=&Directory: |
| TargetLocationSelectionDialog.browseLabel=&Browse... |
| TargetLocationSelectionDialog.messageForSingle=Select the parent directory for project {0}. |
| TargetLocationSelectionDialog.messageForMulti=Select the parent directory for the {0} projects. |
| TagetLocationSelectionDialog.locationEmpty=Project contents directory must be specified. |
| TagetLocationSelectionDialog.invalidLocation=Invalid location path. |
| TagetLocationSelectionDialog.alreadyExists=Project {0} already exists. |
| CheckoutIntoWizard.title=Checkout Into |
| CheckoutIntoWizard.projectSelectionPageTitle=Select local folder |
| CheckoutIntoWizard.projectSelectionPageDescription=Select the local folder that is the target of the checkout operation. |
| CheckoutIntoWizard.error=Checkout Error |
| |
| WorkspaceChangeSetCapability.1=New Set |
| OpenCommitSetAction.20=Open Change in Compare Editor |
| OpenCommitSetAction.21=Could not determine the repository location of the selected resources |
| WorkspaceChangeSetCapability.2=New Change Set |
| WorkspaceChangeSetCapability.3=Enter the name and comment for the new change set |
| CVSChangeSetCollector.4=Retrieving revision histories |
| CVSChangeSetCollector.0=Unassigned Remote Changes |
| WorkspaceChangeSetCapability.7=Edit Change Set Comment |
| WorkspaceChangeSetCapability.8=Edit the name and comment for the change set |
| |
| CheckoutIntoWizard.thisResourceExists=The resource ''{0}'' already exists in the workspace. Overwrite? |
| CheckoutIntoWizard.confirmOverwrite=Confirm Overwrite |
| CheckoutIntoWizard.mappingAlreadyExists=Cannot add remote folder ''{0}'' to project ''{1}'' as ''{2}'' because local folder ''{3}'' is already mapped to that folder. |
| CheckoutIntoProjectSelectionPage.description=Choose the name and parent folder where ''{0}'' should be checked out to. |
| CheckoutIntoProjectSelectionPage.name=Target folder &name: |
| CheckoutIntoProjectSelectionPage.treeLabel=&Parent of target folder: |
| CheckoutIntoProjectSelectionPage.showLabel=&Filter project list: |
| CheckoutIntoProjectSelectionPage.showAll=Show all valid target projects |
| CheckoutIntoProjectSelectionPage.showUnshared=Show unshared projects |
| CheckoutIntoProjectSelectionPage.showSameRepo=Show projects shared with the same repository |
| CheckoutIntoProjectSelectionPage.recurse=&Checkout subfolders |
| CheckoutIntoProjectSelectionPage.invalidFolderName=''{0}'' is not a valid folder name |
| |
| HasProjectMetaFile.taskName=Looking for a remote meta file |
| TagFromWorkspace.taskName=Tagging from workspace |
| TagFromRepository.taskName=Tagging from repository |
| UpdateOnlyMergeable.taskName=Updating mergeable changes |
| UpdateDialog.overwriteTitle=Overwrite Local Changes? |
| UpdateDialog.overwriteMessage=Do you want to overwrite local changes? |
| ReplaceOperation.taskName=CVS Replace |
| UpdateOperation.taskName=CVS Update |
| |
| SafeUpdateAction.warnFilesWithConflictsTitle=Non-mergeable files |
| SafeUpdateAction.warnFilesWithConflictsDescription=Some conflicting files cannot be merged automatically with the update action. They contain conflicting changes that will have to be merged manually. Use the Synchronize View to find the conflicts then merge the changes in a compare editor. |
| |
| SafeUpdateAction.warnFilesWithConflictsTitle=Non-mergeable files |
| SafeUpdateAction.warnFilesWithConflictsDescription=Some conflicting files cannot be merged automatically with the update action. They contain conflicting changes that will have to be merged manually. Use the Synchronize View to find the conflicts then merge the changes in a compare editor. |
| |
| Error.unableToShowSyncView=Error opening Synchronize View. Please ensure that the Team plugin is installed correctly. |
| ShowAnnotationAction.1=Unexpected response from CVS Server: {0} |
| ShowAnnotationAction.2=Annotate Binary File? |
| ShowAnnotationAction.3=File {0} is marked as a binary file. The CVS annotation operation only works properly for files that contain text. Do you wish to continue? |
| |
| UpdateAction.jobName=CVS Update |
| MergeUpdateAction.jobName=CVS Merge |
| MergeUpdateAction.invalidSubscriber=Invalid subscriber: {0} |
| CommitAction.jobName=CVS Commit |
| |
| CommitCommentArea.0=<Click here to enter a commit comment> |
| CommitCommentArea.1=<Choose a previously entered comment> |
| CommitCommentArea.2=Empty commit comment |
| CommitCommentArea.3=The commit comment is empty. Are you sure you would like to continue with an empty comment? |
| CommitCommentArea.4=Re&member decision? |
| |
| OverrideAndUpdateAction.jobName=Performing CVS Override and Update on {0} resources |
| WorkInProgressPreferencePage.6=None |
| |
| |
| |
| CheckoutProjectOperation.8=Checking out ''{0}'' into project ''{1}'' |
| CheckoutProjectOperation.9=Checking out ''{0}'' into {1} projects |
| CheckoutProjectOperation.0=Checkout of remote folder {0} cancelled by user |
| CVSOperation.0=Errors occured in {0} of {1} operations. |
| CVSOperation.1=Show CVS Console |
| CVSOperation.2=Show CVS Console |
| CVSModelElement.0=Error |
| CVSModelElement.1=Error fetching resource list from repository. |
| CVSDecorator.exceptionMessage=Errors occured while applying CVS decorations to resources. |
| FetchMembersOperation.0=Fetching members of {0} |
| |
| RemoteRevisionQuickDiffProvider.readingFile=Error reading remote file |
| RemoteRevisionQuickDiffProvider.closingFile=Error closing remote file |
| RemoteRevisionQuickDiffProvider.fetchingFile=CVS QuickDiff: fetching remote contents |
| RemoteCompareOperation.0=Comparing tags {0} and {1} of {2} |
| |
| WorkspaceToolbarCommitAction.label=Commit |
| WorkspaceToolbarCommitAction.tooltip=Commit All Outgoing Changes... |
| WorkspaceToolbarCommitAction.description=Commit All Outgoing Changes... |
| WorkspaceToolbarCommitAction.image=checkin_action.gif |
| |
| WorkspaceToolbarUpdateAction.label=Update |
| WorkspaceToolbarUpdateAction.tooltip=Update All Incoming Changes... |
| WorkspaceToolbarUpdateAction.description=Update All Incoming Changes... |
| WorkspaceToolbarUpdateAction.image=checkout_action.gif |
| |
| SharingWizardIgnore.label=Ignore |
| SharingWizardIgnore.tooltip=Ignore Selected Resources... |
| SharingWizardIgnore.description=Ignore Selected Resources... |
| SharingWizardIgnore.image=ignorefiles.gif |
| |
| ConsoleRemoveAction.label=Close CVS Console |
| ConsoleRemoveAction.tooltip=Close CVS console |
| ConsoleRemoveAction.image=participant_rem.gif |
| |
| WorkspaceUpdateAction.label=&Update |
| WorkspaceUpdateAction.tooltip=Perform an update on the selected resources |
| WorkspaceUpdateAction.helpContextId=org.eclipse.team.cvs.ui.workspace_update_action |
| |
| OverrideAndUpdateAction.label=O&verride and Update |
| OverrideAndUpdateAction.tooltip=Perform an override and update on the selected resources. This will make the local contents equal to the remote ignoring any local changes. |
| OverrideAndUpdateAction.helpContextId=org.eclipse.team.cvs.ui.workspace_overupdate_action |
| |
| RefreshDirtyStateAction.label=C&lean Timestamps |
| RefreshDirtyStateOperation.0=Problems encountered cleaning timestamps |
| RefreshDirtyStateOperation.1=CVS Clean Timestamps |
| RefreshDirtyStateAction.tooltip=Reset the dirty state of out-of-sync files whose contents match the server contents |
| RefreshDirtyStateAction.helpContextId=org.eclipse.team.cvs.ui.workspace_refresh_dirty_state_action_context |
| |
| WorkspaceCommitAction.label=&Commit... |
| WorkspaceCommitAction.tooltip=Perform a commit on the selected resources |
| WorkspaceCommitAction.helpContextId="org.eclipse.team.cvs.ui.workspace_commit_action |
| |
| OverrideAndCommitAction.label=Override and Comm&it... |
| OverrideAndCommitAction.tooltip=Perform an override and commit on the selected resources. This will make the remote contents equal to the local ignoring any remote changes. |
| OverrideAndCommitAction.helpContextId=org.eclipse.team.cvs.ui.workspace_overcommit_action |
| |
| ConfirmMergedAction.label=&Mark as Merged |
| ConfirmMergedAction.tooltip=Mark the conflict as merged by upgrading the base to match the remote |
| ConfirmMergedAction.helpContextId=org.eclipse.team.cvs.ui.workspace_confirm_merged_action |
| |
| BranchAction.label=&Branch... |
| BranchAction.tooltip=Branch |
| |
| IgnoreAction.label=A&dd to .cvsignore... |
| IgnoreAction.0=Ignoring selected resources for project {0} |
| IgnoreAction.1=Ignoring Resources |
| IgnoreAction.tooltip=Ignore the Selected Resources when Synchronizing |
| |
| ShowResourceInHistoryAction.label=Show in Resource &History |
| ShowResourceInHistoryAction.tooltip=Show in Resource History |
| |
| ShowAnnotationAction.label=Show &Annotation |
| ShowAnnotationAction.tooltip=Show Annotation |
| |
| GenerateDiffFileAction.label=Create &Patch... |
| GenerateDiffFileOperation.0=The file could not be written. Possible reasons are the directory is write-protected or not enough disk space is available. |
| GenerateDiffFileOperation.1=The file could not be written due to an I/O error. |
| GenerateDiffFileOperation.2=An I/O error occured. |
| GenerateDiffFileWizard.0=Please enter a valid location. |
| GenerateDiffFileWizard.2=Please enter a file name. |
| GenerateDiffFileWizard.3=The specified directory does not exist. |
| GenerateDiffFileWizard.4=Please select a location in the workspace. |
| GenerateDiffFileWizard.5=Please enter a valid filename. |
| GenerateDiffFileAction.tooltip=Compare your workspace contents with the server and generate a diff file that can be used as a patch file. |
| |
| MergeUpdateAction.label=&Update |
| MergeUpdateAction.tooltip=Perform an update merge on the selected resources |
| MergeUpdateAction.helpContextId=org.eclipse.team.cvs.ui.merge_update_action |
| |
| CompareRevertAction.label=&Override and Update |
| CompareRevertAction.tooltip=Revert the local file contents to match that of their corresponding remotes |
| CompareRevertAction.helpContextId=org.eclipse.team.cvs.ui.compare_revert_action |
| |
| SharingCommitAction.label=Commit |
| SharingCommitAction.tooltip=Commit All Changes... |
| SharingCommitAction.description=Commit All Changes... |
| SharingCommitAction.image=checkin_action.gif |
| |
| MergeSynchronizeParticipant.8=Missing id initializing cvs merge participant |
| MergeSynchronizeParticipant.9=Unable to initialize cvs merge subscriber |
| MergeSynchronizeParticipant.10=Could not restore CVS Merge in Synchronize view: {0} |
| MergeSynchronizeParticipant.11=Root resource in cvs merge subscriber is no longer in workspace, ignoring: {0} |
| MergeSynchronizeParticipant.12=Missing root resources for cvs merge subscriber: {0} |
| DisconnectOperation.0=Disconnecting |
| DisconnectOperation.1=Disconnecting {0} |
| SubscriberConfirmMergedAction.0=Synchronization information is missing for resource {0} |
| SubscriberConfirmMergedAction.jobName=Performing a CVS Mark as Merged operation on {0} resources. |
| CVSSubscriberAction.0=Invalid attemp to make unsupervised resource {0} in-sync. |
| ReleaseCommentDialog.6=Review resources that will be committed: |
| ReconcileProjectOperation.0=Reconciling project {0} with remote folder {1} |
| CheckoutToRemoteFolderOperation.0=Downloading folder {0} |
| CVSRepositoryPropertiesPage.21=Use this location's connection information for all connections |
| CVSRepositoryPropertiesPage.22=Use the following locations for read and write access |
| CVSRepositoryPropertiesPage.23=Read: |
| CVSRepositoryPropertiesPage.24=Write: |
| CVSRepositoryPropertiesPage.0=Confirm Host or Path Change |
| CVSRepositoryPropertiesPage.1=You have chosen to change the host name or repository root path for this location. You should ensure that this new information still identifies the same repository. |
| CompareRevertAction.0=Reverting {0} resources |
| CompareParticipant.0={0} ({1}) |
| |
| ComparePreferencePage.0=Options for CVS comparisons: |
| ComparePreferencePage.1=Show the &file author in compare editors |
| ComparePreferencePage.2=Automatically enable co&mmit set grouping in CVS synchronizations |
| ComparePreferencePage.3=Show revision &comparisons in a dialog |
| ComparePreferencePage.4=Con&sider file contents in comparisons |
| ComparePreferencePage.6=See ''{0}'' for compare editor preferences. |
| |
| FileModificationValidator.3=Perform Edit? |
| FileModificationValidator.4=A CVS edit notification is required to be sent to the server in order to allow editing of one or more selected files. Continue? |
| CVSSynchronizeViewPage.0=Show incoming grouped by comment |
| CVSSynchronizeWizard.0=Unknown |
| Participant.comparing=Comparing |
| Participant.merging=Merging |
| Participant.synchronizing=Synchronizing |
| |
| Participant.comparingDetail=Comparing {0} with {1} |
| Participant.mergingDetail=Merging {0} |
| Participant.synchronizingDetail=Synchronizing {0} |
| |
| CompareWithRevisionAction.4=Compare With Revision |
| ReplaceWithRevisionAction.0=&Replace |
| ReplaceWithRevisionAction.1=Replace With Revision |
| |
| ConsolePreferencesPage.4=&Show CVS console automatically when command is run |
| ConsolePreferencesPage.5=&Limit console output |
| ConsolePreferencesPage.6=&Fixed width console |
| ConsolePreferencesPage.7=Character &width: |
| ConsolePreferencesPage.8=&Console &buffer size (characters): |
| ConsolePreferencesPage.9=CVS Console Settings: |
| |
| SharingWizard.23=Share Project Resources |
| SharingWizard.24=Review and commit resources to the repository. Use the context menu to perform additional operations on the resources. |
| SharingWizard.25=Module ''{0}'' exists on the server. Select the tag to synchronize with. |
| SharingWizardSyncPage.0=Sharing |
| ReconcileProjectOperation.1=Local resource {0} is a file while the corresponding remote {1} is a folder |
| ReconcileProjectOperation.2=Local resource {0} is a folder while the corresponding remote {1} is a file |
| ShareProjectOperation.0=Sharing project {0} as {1} |
| SharingWizard.26=Keep Sharing? |
| SharingWizard.27=Project {0} has been mapped to a remote module. Should this mapping be kept? |
| SharingWizardSyncPage.3=The resources of project {0} are in-sync with the repository. |
| SharingWizardSyncPage.4=An error has occurred populating this view. |
| SharingWizardSyncPage.5=Show Errors |
| SharingWizardSyncPage.8=Errors Occurred |
| SharingWizardSyncPage.9=The following errors occurred. |
| SharingWizardSyncPage.10=Commit Changes? |
| SharingWizardSyncPage.11=There are still uncommitted changes that have not been shared. Should these changes be committed? |
| SharingWizardSyncPage.12=Launch the &Commit wizard |
| ShareProjectOperation.1=Calculating synchronization states |
| CVSProjectPropertiesPage.31=Show only compatible repository locations |
| CVSProjectPropertiesPage.32=Confirm |
| CVSProjectPropertiesPage.33=The selected repository location may not be compatible with the current location. Are you sure you want to change sharing to the new location? |
| RepositoryEncodingPropertyPage.2=Identify the file system encoding used by the server where the repository is located. Setting this will allow file names and commit comments to be properly translated between the client and server in cases where the server encoding differs from the client. |
| RepositoryEncodingPropertyPage.3=Server Encoding |
| RepositoryEncodingPropertyPage.0=Cannot Change Encoding |
| RepositoryEncodingPropertyPage.1=Location {0} no longer exists. |
| RepositoryEncodingPropertyPage.4=Note: this setting does not apply to file content encodings. File content encodings can be set on the Workbench/Editors preference page and on the Info property page of a project. |
| CheckoutWizard.7=Checkout Project from CVS Repository |
| CheckoutWizard.8=This wizard allows you to checkout projects from a CVS Repository. |
| CheckoutWizard.0=Checkout from CVS |
| CheckoutWizard.10=Select Module |
| CheckoutWizard.11=Select the module to be checked out from CVS |
| ModuleSelectionPage.2=Use an existing &module (this will allow you to browse the modules in the repository) |
| CheckoutAsWizard.3=Select Tag |
| CheckoutAsWizard.4=Choose the tag to check out from |
| CheckoutAsMainPage.10=(Only available when the .project file does not exist in the repository) |
| CVSTeamProvider.updatingFile=Updating {0} |
| CVSTeamProvider.makeBranch=Creating branch |
| CVSTeamProvider.folderInfo=Updating folder synchronization information for project {0} |
| CVSTeamProvider.updatingFolder=Updating {0} |
| AddOperation.0=Adding {0} |
| BranchOperation.0=Branching |
| BranchOperation.1=Branching {0} |
| CommitOperation.0=Committing {0} |
| CommitSetDialog.0=&Name: |
| CommitSetDialog.2=Use the &title as the commit comment |
| CommitSetDialog.3=Enter a commit &comment |
| CommitWizard.0=Committing resources |
| CommitWizard.1=Committing resources |
| CommitWizard.2=Commit files |
| CommitWizard.3=CommitWizard |
| CommitWizard.4=Collecting outgoing changes |
| CommitWizard.6=Nothing to Commit |
| CommitWizard.7=The selected resouces do not contain any changes. |
| UpdateOperation.0=Updating {0} |
| ReplaceOperation.0=Replacing {0} |
| TagOperation.0=Tagging {0} |
| RemoteAnnotationStorage.1=As error occurred computing the content type of remote resource {0} |
| DateTagCategory.0=Dates |
| DateTagDialog.0=Date (M/D/Y): |
| DateTagDialog.1=Include time component in tag |
| DateTagDialog.2=Time (HH:MM:SS): |
| DateTagDialog.3=Time is local |
| DateTagDialog.4=Time is in universal time coordinates (UTC) |
| DateTagDialog.5=Create Date Tag |
| WorkbenchPreference.defaultEncoding = Defaul&t ({0}) |
| WorkbenchPreference.otherEncoding = &Other: |
| WorkbenchPreference.unsupportedEncoding = The selected encoding is not supported. |
| |
| LogEntryCacheUpdateHandler.0=Errors have occured while maintaining the log entry cache. |
| LogEntryCacheUpdateHandler.1=Updating revision histories |
| LogEntryCacheUpdateHandler.2=Could not fetch revision histories due to an internal timeout. |
| MultiFolderTagSource.0={0} folders |
| LocalProjectTagSource.0={0} Projects |
| AnnotateView.0=Could not find an appropriate editor |
| ModeWizard.0=ModeWizard |
| ModeWizard.1=Change the ASCII/Binary Property |
| ModeWizard.2=An error occurred |
| ModeWizard.3=Setting file transfer mode... |
| ModeWizard.4=Problems encountered while setting file transfer mode |
| ModeWizard.5=Errors occured |
| ModeWizard.6=Warnings occurred |
| |
| ModeWizardSelectionPage.2=File |
| ModeWizardSelectionPage.3=ASCII/Binary Property |
| ModeWizardSelectionPage.4=Path |
| ModeWizardSelectionPage.8=&Reset |
| ModeWizardSelectionPage.9=Reset the selected files to their current mode |
| |
| ReplaceWithTagAction.0=There are uncommitted changes in ''{0}'' that will be overwritten. Should ''{0}'' be replaced? |
| ReplaceWithTagAction.1=The following contain &uncommitted changes that will be overwritten. Check those that should be included in the replace operation. |
| ReplaceWithTagAction.2=There are uncommitted changes in ''{0}'' that will be overwritten. Should the replace proceed? |
| ReplaceWithTagAction.4=Replace with Uncommitted Changes |
| UncommittedChangesDialog.2=Select an item to see the dirty resources it contains. |
| UncommittedChangesDialog.3=&The dirty resources contained in ''{0}'' |
| UncommittedChangesDialog.4=&The full path of ''{0}'' |
