| ############################################################################### |
| # Copyright (c) 2000, 2003 IBM Corporation and others. |
| # All rights reserved. This program and the accompanying materials |
| # are made available under the terms of the Common Public License v1.0 |
| # which accompanies this distribution, and is available at |
| # http://www.eclipse.org/legal/cpl-v10.html |
| # |
| # Contributors: |
| # IBM Corporation - initial API and implementation |
| ############################################################################### |
| details=Press the details button for more information. |
| simpleInternal=Internal error |
| internal=An internal error has occurred, consult the error log for details. |
| yes=Yes |
| no=No |
| information=Server Information |
| exception=Server Exception |
| confirmOverwriteTitle=Confirm Overwrite Project |
| confirmOverwrite=The project already exists in the workspace. Its contents will be overwritten. |
| question=Question |
| localChanges=You have local changes which you are about to overwrite. Do you wish to continue? |
| error=Error |
| cvs=CVS |
| notAvailable=Not Available |
| buildError=A build error occurred after the CVS operation completed. |
| ok=OK |
| separator=/ |
| |
| nameAndRevision={0} {1} |
| currentRevision=*{0} |
| |
| AddAction.addFailed=Error occurred during Add |
| AddAction.adding=Adding... |
| AddAction.addIgnoredTitle=Add Ignored Resource? |
| AddAction.addIgnoredQuestion=You have explicitly asked to version control one or more resources that otherwise would have been ignored. Continue? |
| |
| AddToVersionControlDialog.title=Add to CVS Version Control |
| AddToVersionControlDialog.thereIsAnUnaddedResource=There is {0} resource that is not under CVS version control. Do you want to add it? |
| AddToVersionControlDialog.thereAreUnaddedResources=There are {0} resources that are not under CVS version control. Do you want to add them? |
| |
| AddToWorkspaceAction.checkoutFailed=Problems encountered performing checkout |
| AddToWorkspaceAction.thisResourceExists=The resource ''{0}'' already exists in the workspace and will be deleted. Proceed? |
| AddToWorkspaceAction.thisExternalFileExists=The folder ''{0}'' exists in the local file system and will be deleted. Proceed? |
| AddToWorkspaceAction.confirmOverwrite=Confirm Overwrite |
| CheckoutAction.overlappingModuleExpansions=You have attempted to check out multiple remote modules that expand to the same local resource ''{0}''. |
| |
| AutoDefineTagsAction.defineTags = Auto-discover tags |
| |
| AvoidableMessageDialog.dontShowAgain=Don't show this again |
| |
| BranchWizard.title=Create a new CVS Branch |
| BranchWizard.errorBranching=Error Branching Resources |
| BranchWizardPage.pageDescription=Creates a new branch and a starting point version. |
| BranchWizardPage.pageDescriptionVersion=Creates a new branch based on the version in the workspace. |
| BranchWizardPage.specifyVersion=The version will provide a starting point for merging the branch back to the source branch. |
| BranchWizardPage.branchName=Branch Name: |
| BranchWizardPage.versionName=Version Name: |
| BranchWizardPage.startWorking=Start working in the branch |
| BranchWizardPage.versionPrefix=Root_ |
| BranchWizard.versionNameWarning=Version name: {0} |
| BranchWizard.branchNameWarning=Branch name: {0} |
| BranchWizard.branchAndVersionMustBeDifferent=The branch name and version name must be different. |
| BranchWizard.branchNameAlreadyExists=Branch name already exists. |
| BranchWizard.versionNameAlreadyExists=Version name already exists. |
| BranchWizardPage.existingVersionsAndBranches=Existing Versions and Branches: |
| |
| ConsolePreferencePage.consoleColorSettings=Console text color settings. |
| ConsolePreferencePage.commandColor=Command &Line: |
| ConsolePreferencePage.messageColor=&Message: |
| ConsolePreferencePage.errorColor=E&rror: |
| ConsolePreferencePage.font=Console font setting: |
| |
| CVSAction.errorTitle=Errors occurred |
| CVSAction.warningTitle=Warnings occurred |
| CVSAction.multipleProblemsMessage=Multiple problems occurred: |
| CVSAction.mixingTagsTitle=Confirm Mixing Tags |
| CVSAction.mixingTags=You are mixing tags within a project. Beware that synchronization uses the tag information associated with each resource to determine the remote resource with which the local resource is compared. \n\nThis means that the part(s) of your project that you are replacing with another tag will be synchronized with the tag ''{0}'' while other resources in the project will be synchronized with another tag. \n\nDo you wish to continue? |
| |
| CVSAnnotateView.showFileAnnotation=CVS Annotate - {0} |
| CVSAnnotateView.viewInstructions=This view shows annotations for a file in CVS. Select a file and then choose \"Team->Show Annotation\" from the context menu. |
| |
| CVSCatchupReleaseViewer.commit=&Commit... |
| CVSCatchupReleaseViewer.update=&Update from Repository |
| CVSCatchupReleaseViewer.forceCommit=Override and Co&mmit... |
| CVSCatchupReleaseViewer.forceUpdate=Override and U&pdate |
| CVSCatchupReleaseViewer.ignore=A&dd to .cvsignore |
| CVSCatchupReleaseViewer.mergeUpdate=&Merge Changes into Local Copy |
| CVSCatchupReleaseViewer.commonFile=Common file: {0} |
| CVSCatchupReleaseViewer.commonFileRevision=Common file: {0} {1} |
| CVSCatchupReleaseViewer.noCommonFile=No common file |
| CVSCatchupReleaseViewer.noRepositoryFile=No repository file |
| CVSCatchupReleaseViewer.repositoryFile=Repository file: {0} |
| CVSCatchupReleaseViewer.repositoryFileRevision=Repository file: {0} {1} [{2}] |
| CVSCatchupReleaseViewer.workspaceFile=Workspace file: {0} |
| CVSCatchupReleaseViewer.showInHistory=Show in &Resource History |
| CVSCatchupReleaseViewer.fileDecoration={0} ({1}) |
| CVSCatchupReleaseViewer.folderDecoration={0} {1} |
| CVSCatchupReleaseViewer.confirmMerge=Mark as Mer&ged |
| CVSCatchupReleaseViewer.addAction=&Add to Version Control |
| CVSCatchupReleaseViewer.labelWithSyncKind={0} {1} |
| |
| CVSCompareEditorInput.branchLabel=<branch-{0}> |
| CVSCompareEditorInput.headLabel=<HEAD> |
| CVSCompareEditorInput.comparing=Comparing... |
| CVSCompareEditorInput.different=Cannot compare resources of different kind. |
| CVSCompareEditorInput.inBranch={0} in {1} |
| CVSCompareEditorInput.inHead={0} in HEAD |
| CVSCompareEditorInput.repository=Repository: {0} {1} |
| CVSCompareEditorInput.titleAncestor=Compare {0} {1}-{2} and {3} |
| CVSCompareEditorInput.titleNoAncestor=Compare {0} {1} and {2} |
| CVSCompareEditorInput.titleNoAncestorDifferent=Compare {0} {1} and {2} {3} |
| CVSCompareEditorInput.workspace=Workspace: {0} |
| CVSCompareEditorInput.workspaceLabel=<workspace> |
| CVSCompareEditorInput.noWorkspaceFile=No workspace file |
| CVSCompareEditorInput.noRepositoryFile=No repository file |
| |
| CVSCompareRevisionsInput.addToWorkspace=Get |
| CVSCompareRevisionsInput.compareResourceAndVersions=Compare {0} <workspace> and versions |
| CVSCompareRevisionsInput.errorReplacingTitle=Unable to Replace |
| CVSCompareRevisionsInput.errorReplacingMessage=Resource(s) could not be loaded. A communication error may have occurred, or \ |
| the resource(s) may not exist on the server, or you may \ |
| not have permission to access them. |
| CVSCompareRevisionsInput.repository=Repository file: {0} |
| CVSCompareRevisionsInput.structureCompare=Structure Compare |
| CVSCompareRevisionsInput.workspace=Workspace file: {0} |
| CVSCompareRevisionsInput.truncate={0}[...] |
| |
| CVSDecorator.projectDecoration={0} [{1}] |
| CVSDecorator.projectDecorationWithTag={0} [{1} {2}] |
| CVSDecorator.fileDecorationWithTag={0} [{1}:{2}] |
| CVSDecorator.fileDecorationNoTag={0} [{1}] |
| CVSDecorator.folderDecoration={0} [{1}] |
| |
| CVSDecoratorPreferencesPage.description=CVS Decorator settings: |
| CVSDecoratorPreferencesPage.iconDescription=Choose which CVS resource states should be indicated using an icon decorator: |
| CVSDecoratorPreferencesPage.generalDescription=Set general properties of CVS decorators: |
| CVSDecoratorPreferencesPage.generalTabFolder=&General |
| CVSDecoratorPreferencesPage.newResources=Indicate is &new resource |
| CVSDecoratorPreferencesPage.synchronizeTabFolder=S&ynchronize View |
| CVSDecoratorPreferencesPage.synchronizeDescription=Set the properties of CVS decorators for the Synchronize view: |
| CVSDecoratorPreferencesPage.showSyncInfoInLabel=Show all synchronization information in a resource's text label |
| |
| CVSFilePropertiesPage.ignored=The file is ignored by CVS. |
| CVSFilePropertiesPage.notManaged=The file is not managed by CVS. |
| CVSFilePropertiesPage.isAdded=This file has been added to CVS control but has not been committed |
| CVSFilePropertiesPage.baseRevision=Base revision: |
| CVSFilePropertiesPage.baseTimestamp=Base timestamp: |
| CVSFilePropertiesPage.dirty=Dirty: |
| CVSFilePropertiesPage.modified=Modified: |
| CVSFilePropertiesPage.keywordMode=Keyword mode: |
| CVSFilePropertiesPage.tag=Tag: |
| CVSFilePropertiesPage.none=HEAD |
| CVSFilePropertiesPage.version={0} (Version) |
| CVSFilePropertiesPage.branch={0} (Branch) |
| CVSFilePropertiesPage.date={0} (Date) |
| CVSFilePropertiesPage.error=An error occurred while creating this page. |
| CVSFilePropertiesPage.permissions=Permissions: |
| CVSFilePropertiesPage.notAvailable=Not Available |
| |
| CVSFolderPropertiesPage.ignored=The folder is ignored by CVS. |
| CVSFolderPropertiesPage.notManaged=The folder is not managed by CVS. |
| CVSFolderPropertiesPage.notCVSFolder=This folder has lost its CVS sharing information. |
| CVSFolderPropertiesPage.root=Repository root: |
| CVSFolderPropertiesPage.repository=Repository path: |
| CVSFolderPropertiesPage.static=Static: |
| CVSFolderPropertiesPage.disconnect=&Disconnect... |
| CVSFolderPropertiesPage.disconnectTitle=Disconnect folder? |
| CVSFolderPropertiesPage.disconnectQuestion=Disconnecting the folder from CVS control will delete the CVS synchronization information for the folder. Are you sure you want to disconnect? |
| |
| CVSLocalCompareEditorInput.title=CVS Compare [{0}] |
| |
| CVSOperationCancelledException.operationCancelled=Operation Cancelled |
| |
| CVSPropertiesPage.connectionType=&Connection type: |
| CVSPropertiesPage.user=&User: |
| CVSPropertiesPage.password=&Password: |
| CVSPropertiesPage.host=Host: |
| CVSPropertiesPage.port=Port: |
| CVSPropertiesPage.path=Repository path: |
| CVSPropertiesPage.module=Module: |
| CVSPropertiesPage.defaultPort=Default |
| CVSPropertiesPage.tag=Tag: |
| CVSPropertiesPage.update=Change &Tag... |
| CVSPropertiesPage.virtualModule=<no corresponding remote folder> |
| |
| CVSPreferencePage.description=General CVS settings: |
| CVSPreferencePage.debugProtocol=&Display detailed protocol output to stdout (for debugging purposes) |
| CVSPreferencePage.pruneEmptyDirectories=&Prune empty directories |
| CVSPreferencePage.timeoutValue=&Communication timeout (in seconds): |
| CVSPreferencePage.quietness=&Quietness level: |
| CVSPreferencePage.notquiet=Verbose |
| CVSPreferencePage.somewhatquiet=Somewhat quiet |
| CVSPreferencePage.reallyquiet=Very quiet |
| CVSPreferencePage.silentWarningTitle="Very Quiet" mode is dangerous |
| CVSPreferencePage.silentWarningMessage= In "Very Quiet" mode, some cvs servers may not communicate important information about errors that have occurred. You may want to consider using "Somewhat quiet" mode instead. |
| CVSPreferencePage.considerContentsInCompare=Con&sider file contents in comparisons |
| CVSPreferencePage.showAddRemoveMarkers=Show deleted file &markers |
| CVSPreferencePage.replaceUnmanaged=&Delete unmanaged resources on replace |
| CVSPreferencePage.defaultTextKSubst=Default &keyword substitution: |
| CVSPreferencePage.compressionLevel=Compression &level: |
| CVSPreferencePage.level0=0 (disabled) |
| CVSPreferencePage.level1=1 (lowest compression) |
| CVSPreferencePage.level2=2 |
| CVSPreferencePage.level3=3 |
| CVSPreferencePage.level4=4 |
| CVSPreferencePage.level5=5 |
| CVSPreferencePage.level6=6 |
| CVSPreferencePage.level7=7 |
| CVSPreferencePage.level8=8 |
| CVSPreferencePage.level9=9 (highest compression) |
| CVSPreferencePage.Save_dirty_editors_before_CVS_operations_1=Save dirty editors before CVS operations |
| CVSPreferencePage.&Never_2=&Never |
| CVSPreferencePage.&Prompt_3=P&rompt |
| CVSPreferencePage.Auto-&save_4=&Auto-save |
| CVSPreferencePage.repositoriesAreBinary=&Treat all new files as binary |
| CVSPreferencePage.determineVersionEnabled=&Validate server version compatibility on first connection |
| CVSPreferencePage.confirmMoveTag=Confirm &move tag on tag operation |
| |
| CVSRemoteFilePropertySource.name=Name |
| CVSRemoteFilePropertySource.revision=Revision |
| CVSRemoteFilePropertySource.date=Date |
| CVSRemoteFilePropertySource.author=Author |
| CVSRemoteFilePropertySource.comment=Comment |
| CVSRemoteFilePropertySource.tag=Tag |
| |
| CVSRemoteFolderPropertySource.name=Name |
| CVSRemoteFolderPropertySource.tag=Tag |
| CVSRemoteFolderPropertySource.none=(none) |
| |
| CVSRepositoryLocationPropertySource.default=Default |
| CVSRepositoryLocationPropertySource.host=Host |
| CVSRepositoryLocationPropertySource.user=User |
| CVSRepositoryLocationPropertySource.port=Port |
| CVSRepositoryLocationPropertySource.root=Root |
| CVSRepositoryLocationPropertySource.method=Connection Method |
| |
| CVSSyncCompareInput.confirmMergeMessageTitle=Information |
| CVSSyncCompareInput.confirmMergeMessage=Your changes have been saved. When you are finished, \ |
| select 'Mark as Merged' to make this file an outgoing change. |
| CVSSyncCompareInput.projectDeleted=Project ''{0}'' has been deleted locally and cannot be synchronized. |
| CVSSyncCompareInput.filteringOutgoingChanges=Accumulating resources with outgoing changes |
| |
| CVSSyncSet.conflicts={0} conflicts, |
| CVSSyncSet.incomings={0} incoming change(s), |
| CVSSyncSet.noConflicts=No conflicts, |
| CVSSyncSet.noIncomings=no incoming changes, |
| CVSSyncSet.noOutgoings=no outgoing changes, |
| CVSSyncSet.outgoings={0} outgoing change(s), |
| CVSSyncSet.noNew=no new resources. |
| CVSSyncSet.new={0} new resource(s). |
| |
| CVSUIPlugin.refreshTitle=Refresh Resource? |
| CVSUIPlugin.refreshQuestion={0} Would you like to refresh resource ''{1}''? |
| CVSUIPlugin.refreshMultipleQuestion={0} Would you like to refresh the selected resources? |
| |
| CVSAction.disabledTitle=Information |
| CVSAction.disabledMessage=The chosen operation is not enabled. |
| CVSAction.refreshTitle=Refresh Project? |
| CVSAction.refreshQuestion={0} Would you like to refresh project ''{1}''? |
| CVSAction.refreshMultipleQuestion={0} Would you like to refresh the projects of the selected resources? |
| |
| CommitAction.commitFailed=Problems encountered performing commit |
| |
| CommitSyncAction.questionRelease=You have changes that conflict with the server. Release those changes? |
| CommitSyncAction.titleRelease=Confirm Overwrite |
| CommitSyncAction.releaseAll=Release all changes, overriding any conflicting changes on the server. |
| CommitSyncAction.releasePart=Only release the changes that don't conflict with changes on the server. |
| CommitSyncAction.cancelRelease=Cancel the release operation. |
| CommitSyncAction.errorCommitting=An error occurred while committing changes. |
| |
| CompareWithRemoteAction.compare=Error Comparing with Latest |
| CompareWithRemoteAction.noRemote=No Remote Resource |
| CompareWithRemoteAction.noRemoteLong=The selected resource has no remote resource to compare with. |
| CompareWithRemoteAction.fetching=Comparing with latest from repository... |
| |
| CompareWithRevisionAction.compare=Error Comparing with Revision |
| CompareWithRevisionAction.noRevisions=No Revisions |
| CompareWithRevisionAction.noRevisionsLong=The selected resource has no revisions to compare with. |
| CompareWithRevisionAction.fetching=Fetching revisions from repository... |
| |
| CompareWithTagAction.message=Compare with Branch or Version |
| CompareWithTagAction.replace=Error Comparing With Branch or Version |
| CompareWithTagAction.noRemote=No Remote Resource |
| CompareWithTagAction.noRemoteLong=The selected tag has no remote resource to compare with. |
| CompareWithTagAction.fetching=Fetching resources with tag {0}... |
| |
| CompareEditorInput.fileProgress=Comparing CVS file: {0} |
| |
| ConfigurationWizardAutoconnectPage.description=Your project already has CVS/ directories. It was probably previously shared, or checked out using another tool. It will be automatically shared using the following information. |
| ConfigurationWizardAutoconnectPage.user=User: |
| ConfigurationWizardAutoconnectPage.host=Host: |
| ConfigurationWizardAutoconnectPage.port=Port: |
| ConfigurationWizardAutoconnectPage.default=Default |
| ConfigurationWizardAutoconnectPage.connectionType=Connection type: |
| ConfigurationWizardAutoconnectPage.repositoryPath=Repository path: |
| ConfigurationWizardAutoconnectPage.module=Module: |
| ConfigurationWizardAutoconnectPage.validate=&Validate Connection on Finish |
| ConfigurationWizardAutoconnectPage.noSyncInfo=Could not get folder information |
| ConfigurationWizardAutoconnectPage.noCVSDirectory=Could not find CVS/ directory |
| |
| RepositorySelectionPage.description=This wizard will help you to share your files with the CVS repository for the first time. Your project will automatically be imported into the CVS repository, and the Synchronize view will open to allow you to commit your resources. |
| RepositorySelectionPage.useExisting=&Use existing repository location: |
| RepositorySelectionPage.useNew=&Create a new repository location |
| |
| ConfigurationWizardMainPage.connection=&Connection type: |
| ConfigurationWizardMainPage.userName=&User: |
| ConfigurationWizardMainPage.password=&Password: |
| ConfigurationWizardMainPage.host=&Host: |
| ConfigurationWizardMainPage.useDefaultPort=Use &Default Port |
| ConfigurationWizardMainPage.usePort=Use Por&t: |
| ConfigurationWizardMainPage.repositoryPath=&Repository path: |
| ConfigurationWizardMainPage.invalidUserName=Invalid User Name |
| ConfigurationWizardMainPage.invalidHostName=Invalid Host Name |
| ConfigurationWizardMainPage.invalidPort=Invalid Port |
| ConfigurationWizardMainPage.invalidPathWithSpaces=The repository path cannot have segments with leading or trailing spaces |
| ConfigurationWizardMainPage.invalidPathWithSlashes=The repository path cannot contain a double slash (//) |
| ConfigurationWizardMainPage.useNTFormat=Use NT path names for specifying CVSNT repository paths (e.g. C:\\cvs\\root) |
| |
| Console.copy=Copy |
| Console.selectAll=Select All |
| Console.clearOutput=Clear Output |
| Console.resultServerError={0} {1} |
| Console.resultWarnings={0} {1} |
| Console.resultException=failed due to an internal error {0} |
| Console.resultAborted=operation canceled {0} |
| Console.resultOk=ok {0} |
| Console.resultTimeFormat='(took 'm:ss.SSS')' |
| Console.couldNotFormatTime=An error occurred formatting the output time for the CVS console. |
| Console.preExecutionDelimiter=*** |
| Console.postExecutionDelimiter=*** |
| Console.info=Info: {0} |
| Console.warning=Warning: {0} |
| Console.error=Error: {0} |
| |
| AddToBranchAction.enterTag=Enter Branch Tag |
| AddToBranchAction.enterTagLong=Enter the name of the branch: |
| |
| DiffAction.diff=Diff |
| |
| FixTypeAction.fix=Fix Types |
| |
| GenerateCVSDiff.title=Create Patch |
| GenerateCVSDiff.pageTitle=Run and save CVS diff results in a file |
| GenerateCVSDiff.pageDescription=The results of the CVS diff command can be used as an input file for the Apply Patch wizard. |
| GenerateCVSDiff.overwriteTitle=Confirm Overwrite |
| GenerateCVSDiff.overwriteMsg=A file with that name already exists. Overwrite? |
| GenerateCVSDiff.error=Error running the CVS diff command |
| GenerateCVSDiff.working=Running CVS diff... |
| GenerateCVSDiff.noDiffsFoundMsg=No differences found. |
| GenerateCVSDiff.noDiffsFoundTitle=CVS diff |
| |
| GetSyncAction.questionCatchup=You have local changes which you are about to overwrite. Should the conflicting changes be added? |
| GetSyncAction.titleCatchup=Catch up Over Conflicts? |
| GetSyncAction.catchupAll=Catch up to all incoming changes, overriding any conflicting local changes. |
| GetSyncAction.catchupPart=Only catch up to the changes that don't conflict with local changes. |
| GetSyncAction.cancelCatchup=Cancel the catch up operation. |
| UpdateSyncAction.errorUpdating=An error occurred while updating changes. |
| |
| HistoryFilterDialog.title = Filter Resource History |
| HistoryFilterDialog.showMatching = Show entries matching: |
| HistoryFilterDialog.matchingAny = a&ny of the provided criteria |
| HistoryFilterDialog.matchingAll = a&ll of the provided criteria |
| HistoryFilterDialog.author = &Author: |
| HistoryFilterDialog.comment = &Comment containing: |
| HistoryFilterDialog.fromDate = &From date (M/D/Y) : |
| HistoryFilterDialog.toDate = &To date (M/D/Y) : |
| |
| HistoryView.getAnnotateAction=Show &Annotation |
| HistoryView.getContentsAction=&Get Contents |
| HistoryView.getRevisionAction=Get Sticky &Revision |
| HistoryView.tagWithExistingAction=&Tag with Existing... |
| HistoryView.copy=&Copy |
| HistoryView.revision=Revision |
| HistoryView.tags=Tags |
| HistoryView.date=Date |
| HistoryView.author=Author |
| HistoryView.comment=Comment |
| HistoryView.refreshLabel=&Refresh View |
| HistoryView.refresh=Refresh View |
| HistoryView.linkWithLabel=Link with &Editor |
| HistoryView.selectAll=Select &All |
| HistoryView.showComment=Show Comment Viewer |
| HistoryView.showTags=Show Tag Viewer |
| HistoryView.title=CVS Resource History |
| HistoryView.titleWithArgument=CVS Resource History - {0} |
| HistoryView.overwriteTitle=Overwrite local changes? |
| HistoryView.overwriteMsg=You have local changes. Do you want to overwrite them? |
| HistoryView.fetchHistoryJob=Fetching CVS revision history |
| HistoryView.fetchHistoryJobFile=Fetching CVS revision history for: {0} |
| HistoryView.errorFetchingEntries=Error fetching entries for {0} |
| |
| IgnoreAction.ignore=Error Ignoring Resource |
| |
| MergeAction.saveChangesTitle=Save Changes |
| MergeAction.saveChanges=You have unsaved changes that will be saved before the action is performed. |
| |
| MergeEditorInput.title=Merge {0} with {1} |
| |
| MergeWizardEndPage.branches=Branches |
| MergeWizardEndPage.description=This is the version or branch that contains the work you would like to merge. |
| MergeWizardEndPage.duplicateTagSelected=Cannot select {0} because it has already been selected as the start tag. |
| |
| MergeWizardStartPage.description=This is the version you created when you branched. |
| |
| MergeWizard.title=Merge |
| MergeWizard.start=Select the merge start point |
| MergeWizard.end=Select where you want to merge the changes from |
| MergeWizard.preparing=Preparing merge wizard |
| MergeWizard.preparingStart=Fetching tags for start page |
| MergeWizard.preparingEnd=Fetching tags for end page |
| |
| ModuleSelectionPage.moduleIsProject=Use project name as module name |
| ModuleSelectionPage.specifyModule=Use specified module name: |
| |
| MoveTagAction.errorMessage=Error Tagging |
| MoveTagAction.title=Tag with Existing Tag |
| MoveTagAction.message=&Select the tag to be moved: |
| |
| NewLocationWizard.title=Add CVS Repository |
| NewLocationWizard.heading=Add a new CVS Repository |
| NewLocationWizard.description=Add a new CVS Repository to the CVS Repositories view |
| NewLocationWizard.validationFailedText=Error validating location: "{0}"\n\nKeep location anyway? |
| NewLocationWizard.validationFailedTitle=Unable to Validate |
| NewLocationWizard.exception=Unable to create repository location |
| |
| OpenLogEntryAction.deletedTitle=Resource is Deleted |
| OpenLogEntryAction.deleted=The selected revision represents a deletion. It cannot be opened. |
| |
| ReleaseCommentDialog.title=Commit |
| ReleaseCommentDialog.choosePrevious=Choose a &previously entered comment: |
| ReleaseCommentDialog.enterComment=Edit the commit &comment: |
| ReleaseCommentDialog.unaddedResources=Checked resources will be &added to CVS version control. |
| ReleaseCommentDialog.selectAll=&Select All |
| ReleaseCommentDialog.deselectAll=D&eselect All |
| ReleaseCommentDialog.clearTextArea=&Reset Comment |
| |
| RemoteFolderElement.nameAndTag={0} {1} |
| RemoteFolderElement.fetchingRemoteChildren=Fetching remote CVS children for ''{0}''... |
| |
| RemoveRootAction.removeRoot=Error Discarding Location |
| |
| ReplaceWithTagAction.message=Replace with Branch or Version |
| ReplaceWithTagAction.replace=Error Replacing With Tag |
| ReplaceWithTagAction.replacing=Replacing with tag {0} |
| ReplaceWithTagAction.mixingTags=You are mixing tags within a project. This may cause confusion \ |
| when synchronizing with the repository. Synchronize uses the tag information associated with \ |
| each resource to determine the remote resource with which the local resource is compared. \ |
| For example, with version tags, the state of the tagged resources never change so you will \ |
| not see changes made to the resources in HEAD (or other branches). Do you wish to continue? |
| |
| ReplaceWithRemoteAction.replacing=Replacing |
| ReplaceWithRemoteAction.problemMessage=Error Replacing With Latest From Repository |
| |
| ReplaceWithAction.confirmOverwrite=Confirm Overwrite |
| ReplaceWithAction.localChanges={0} has local changes which you are about to overwrite. Do you wish to overwrite? |
| ReplaceWithAction.calculatingDirtyResources=Finding outgoing changes... |
| |
| ReplaceWithLatestAction.multipleTags=&Latest from Repository |
| ReplaceWithLatestAction.multipleVersions=&Versions from Repository |
| ReplaceWithLatestAction.multipleBranches=&Latest from Branches |
| ReplaceWithLatestAction.singleVersion=&Version {0} |
| ReplaceWithLatestAction.singleBranch=&Latest from Branch {0} |
| ReplaceWithLatestAction.singleHEAD=&Latest from {0} |
| |
| RepositoryDialog.getRepository=Select a repository |
| RepositoryDialog.description=Select a repository to connect your project to |
| |
| RepositoryManager.getting=Getting |
| RepositoryManager.committing=Committing |
| RepositoryManager.updating=Updating |
| RepositoryManager.deleting=Deleting |
| RepositoryManager.adding=Adding |
| RepositoryManager.rename=An IO Exception occurred while renaming the state file |
| RepositoryManager.save=An IO Exception occurred while saving the state file |
| RepositoryManager.ioException=An IO Exception occurred while reading the state file |
| RepositoryManager.parsingProblem=An error occurred parsing file ''{0}''. |
| RepositoryManager.fetchingRemoteFolders=Fetching remote CVS folders for ''{0}''... |
| |
| RepositoriesView.refresh=&Refresh View |
| RepositoriesView.refreshTooltip=Refresh View |
| RepositoriesView.new=&Repository Location... |
| RepositoriesView.newSubmenu=&New |
| RepositoriesView.newAnonCVS=&Anonymous Repository Location to dev.eclipse.org... |
| RepositoriesView.newWorkingSet=Select Working Set... |
| RepositoriesView.deselectWorkingSet=Deselect Working Set |
| RepositoriesView.editWorkingSet=Edit Active Working Set... |
| RepositoriesView.workingSetMenuItem={0} {1} |
| RepositoriesView.collapseAll=Collapse All |
| RepositoriesView.collapseAllTooltip=Collapse All |
| RepositoriesView.NItemsSelected={0} items selected |
| RepositoriesView.OneItemSelected=1 item selected |
| RepositoriesView.ResourceInRepository={0} in {1} |
| RepositoriesView.CannotGetRevision=Cannot get revision |
| RemoteViewPart.workingSetToolTip=Working Set: {0} |
| |
| ResourcePropertiesPage.status=Status |
| ResourcePropertiesPage.notManaged=Not managed by CVS |
| ResourcePropertiesPage.versioned=versioned |
| ResourcePropertiesPage.notVersioned=not versioned |
| ResourcePropertiesPage.state=State |
| ResourcePropertiesPage.checkedOut=Checked Out |
| ResourcePropertiesPage.checkedIn=Checked In |
| #ResourcePropertiesPage.baseRevision=Base Revision |
| #ResourcePropertiesPage.none=none |
| ResourcePropertiesPage.error=Error |
| |
| KSubstWizard.title=Set Keyword Substitution |
| KSubstWizard.working=Setting keyword substitution mode... |
| KSubstWizard.problemsMessage=Problems encountered setting keyword substitution |
| KSubstWizard.errorTitle=Errors Occurred |
| KSubstWizard.warningTitle=Warnings occurred |
| |
| KSubstWizardSharedFilesPage.pageTitle=Include versioned files |
| KSubstWizardSharedFilesPage.pageDescription=\ |
| Choose to include or exclude files that are already in the repository |
| KSubstWizardSharedFilesPage.contents=\ |
| Since the keyword substitution mode attribute is not version controlled, the \ |
| change will be reflected immediately on all branches and in all revisions of \ |
| any affected files that are already shared in the repository. You should inform \ |
| all developers that they must delete and check out fresh copies of the affected \ |
| files before committing new changes to the repository. You may also experience \ |
| side-effects working with earlier revisions of these files. |
| KSubstWizardSharedFilesPage.includeSharedFiles=&Include files that are already shared in the repository. |
| KSubstWizardSharedFilesPage.sharedFilesViewer.title=&The following files were selected and are already shared in the repository: |
| |
| KSubstWizardDirtyFilesPage.pageTitle=Include files with outgoing changes |
| KSubstWizardDirtyFilesPage.pageDescription=\ |
| Choose to include or exclude files with outgoing changes |
| KSubstWizardDirtyFilesPage.contents=\ |
| This operation may commit changes to files without first providing a chance to resolve \ |
| conflicts. |
| KSubstWizardDirtyFilesPage.includeDirtyFiles=&Include files that have outgoing changes. |
| KSubstWizardDirtyFilesPage.dirtyFilesViewer.title=&The following files were selected and have outgoing changes. |
| |
| KSubstWizardSelectionPage.pageTitle=Select Keyword Substitution Mode |
| KSubstWizardSelectionPage.pageDescription=\ |
| Choose the desired keyword substitution mode for the selected files. |
| KSubstWizardSelectionPage.automaticButton=&Automatic |
| KSubstWizardSelectionPage.automaticLabel=\ |
| Automatically chooses ''{0}'' or ''{1}'' \ |
| for each file according to the Team file extension preferences. |
| KSubstWizardSelectionPage.binaryButton=&Binary (-kb) |
| KSubstWizardSelectionPage.binaryLabel=\ |
| Binary files are stored in the repository without alteration.\n\ |
| CVS does not directly support conflict resolution for binary files. |
| KSubstWizardSelectionPage.textButton=A&SCII without keyword substitution (-ko) |
| KSubstWizardSelectionPage.textLabel=\ |
| End of lines are replaced with the appropriate convention for the client system.\n\ |
| CVS supports conflict resolution and differencing of ASCII files with single line granularity. |
| KSubstWizardSelectionPage.textWithSubstitutionsButton=ASCII with &keyword substitution |
| KSubstWizardSelectionPage.textWithSubstitutionsLabel=\ |
| End of lines are replaced with the appropriate convention for the client system.\n\ |
| ASCII files may contain keywords that are expanded by the CVS server during file transfers.\n\ |
| Please consult the CVS documentation for a description of the various supported keywords and modes. |
| |
| KSubstWizardCommitCommentPage.pageTitle=Enter Commit Comment |
| KSubstWizardCommitCommentPage.pageDescription=\ |
| Enter the commit comment to be used for the selected files when they are committed. |
| |
| KSubstWizardSummaryPage.pageTitle=Summary |
| KSubstWizardSummaryPage.pageDescription=\ |
| Summary of keyword substitution changes to be performed. |
| KSubstWizardSummaryPage.contents=\ |
| Click on \'Finish\' to change the keyword substitution mode of the checked files indicated below.\n\ |
| You can change the mode on a per file basis by clicking in the corresponding cell.\n\ |
| Note: Files that are not checked, or that already have the indicated mode will not be affected in any way. |
| KSubstWizardSummaryPage.showUnaffectedFiles=&Show files that already have the requested keyword substitution mode. |
| KSubstWizardSummaryPage.summaryViewer.title=&The following checked files will have their keyword substitution mode changed to the indicated value. |
| KSubstWizardSummaryPage.summaryViewer.fileHeader=File Location |
| KSubstWizardSummaryPage.summaryViewer.ksubstHeader=Keyword Substitution Mode |
| |
| SharingWizard.autoConnectTitle=Connect Project to Repository |
| SharingWizard.autoConnectOneOTitle=Connect Project from Eclipse 1.0 to Repository |
| SharingWizard.autoConnectTitleDescription=Project is already configured with CVS repository information. |
| SharingWizard.couldNotImport=Remote Project Exists |
| SharingWizard.couldNotImportLong=Module ''{0}'' already exists remotely. Would you like to synchronize your local project with the existing remote module? |
| SharingWizard.selectTagTitle=Select Tag |
| SharingWizard.selectTag=&Select the tag to synchronize with: |
| SharingWizard.description=Configure a Project to Use CVS |
| SharingWizard.importTitle=Share Project with CVS Repository |
| SharingWizard.importTitleDescription=Select an existing repository location or create a new location. |
| SharingWizard.title=Share Project |
| SharingWizard.heading=Configure a Project to Use CVS |
| SharingWizard.enterInformation=Enter Repository Location Information |
| SharingWizard.enterInformationDescription=Define the location and protocol required to connect with an existing CVS repository. |
| SharingWizard.enterModuleName=Enter Module Name |
| SharingWizard.enterModuleNameDescription=Select the name of the module in the CVS repository. |
| SharingWizard.readyToFinish=Ready to Share Project |
| SharingWizard.readyToFinishDescription=Select Finish to import the project into the CVS repository. |
| SharingWizard.validationFailedText={0}. Set project sharing anyway? |
| SharingWizard.validationFailedTitle=Unable to Validate |
| |
| SharingWizardFinishPage.message=The wizard has all the information necessary to share your project with the CVS repository. When you click \"Finish\", the wizard will import your project into the repository and open the Synchronize view to allow you to commit your resources. |
| |
| ShowHistoryAction.showHistory=Error occurred performing Show History |
| ShowHistoryAction.noHistory=No History Available |
| ShowHistoryAction.noHistoryLong=No resource history available for selected resources. |
| |
| SyncAction.sync=Synchronize |
| SyncAction.workingSetName=Latest CVS Synchronize |
| |
| TagAction.tagErrorTitle=Tagging Error |
| TagAction.tagWarningTitle=Tagging Warning |
| TagAction.tagProblemsMessage=Problems reported tagging the resource. |
| TagAction.tagProblemsMessageMultiple=Problems tagging the resources. {0} project(s) successfully tagged and {1} project(s) with errors. |
| TagAction.tagResources=Tag Resources |
| TagAction.enterTag=Please enter a version tag: |
| TagAction.moveTag=&Move tag if it already exists |
| TagAction.moveTagConfirmTitle=Confirm Move Existing Tag |
| TagAction.moveTagConfirmMessage=If the tag {0} is already used in this project, it will be moved to the selected revisions. Are you sure you want to perform the tag operation? |
| TagAction.uncommittedChangesTitle=Confirm Uncommitted Changes |
| TagAction.uncommittedChanges=You are tagging ''{0}'' that has uncommitted changes. These changes are not in the repository and will not be included in the version you are creating. Do you still want to tag this resource? |
| TagAction.tagAlreadyExists=Version tag already exists. |
| TagAction.existingVersions=Existing Versions: |
| |
| TagInRepositoryAction.tagProblemsMessage=Problems reported tagging the resource. |
| TagInRepositoryAction.tagProblemsMessageMultiple=Problems tagging the resources. {0} resource(s) successfully tagged and {1} resource(s) with errors. |
| |
| UpdateAction.update=Problems encountered performing update |
| UpdateAction.updating=Updating... |
| |
| UpdateWizard.title=Update |
| UpdateWizard.updatePage=Update |
| |
| UpdateWizardPage.description=&Select a tag to update the project sharing to: |
| UpdateWizardPage.overwrite=&Overwrite local changes |
| |
| UserValidationDialog.required=Password Required |
| UserValidationDialog.labelUser=Enter a user name and password for the following repository: {0} |
| UserValidationDialog.labelPassword=Enter a password for {0} in the following repository: {1} |
| UserValidationDialog.password=Password: |
| UserValidationDialog.user=User name: |
| |
| VersionsElement.versions=Versions |
| |
| WorkbenchUserAuthenticator.cancelled=Operation cancelled because login cancelled |
| WorkbenchUserAuthenticator.errorFlushing=Error occurred while flushing password for {0} |
| WorkbenchUserAuthenticator.errorSaving=Error occurred while saving password for {0} |
| |
| Unmanage.unmanaging=Disconnecting from CVS... |
| Unmanage.unmanage=Disconnect from CVS |
| Unmanage.title=Confirm Disconnect from CVS |
| Unmanage.titleN=Confirm Multiple Project Disconnect from CVS |
| Unmanage.message=Are you sure you want to disconnect CVS from ''{0}''? |
| Unmanage.messageN=Are you sure you want to disconnect CVS from these {0} projects? |
| Unmanage.option1=Do not delete the CVS meta information (e.g. CVS sub-directories). |
| Unmanage.option2=Also delete the CVS meta information from the file system. |
| Unmanage.unmanagingError=Errors occurred while disconnecting |
| |
| Unmanage.message=Are you sure you want to disconnect CVS from ''{0}''? |
| Unmanage.messageN=Are you sure you want to disconnect CVS from these {0} projects? |
| |
| Enter_a_valid_file_name_or_select_the_clipboard_option_1=Enter a valid file name or select the clipboard option |
| Save_To_Clipboard_2=&Save To Clipboard |
| Save_In_File_System_3=Sa&ve In File System |
| Browse..._4=Br&owse... |
| Save_Patch_As_5=Save Patch As |
| patch.txt_6=patch.txt |
| Save_In_Workspace_7=Save In &Workspace |
| Select_a_folder_then_type_in_the_file_name__8=Select a fol&der then type in the file name: |
| Fi&le_name__9=Fi&le name: |
| Do_not_recurse_into_sub-folders_10=&Recurse into sub-folders |
| Do_not_include_new_files_in_patch_11=&Include new files in patch |
| Diff_output_format_12=Diff output format |
| Unified_(format_required_by_Compare_With_Patch_feature)_13=&Unified (format required by the Apply Patch wizard) |
| Context_14=&Context |
| Standard_15=&Standard |
| Advanced_options_19=Advanced options |
| Configure_the_options_used_for_the_CVS_diff_command_20=Configure the options used for the CVS diff command |
| |
| After_configuring_the_project__1=After configuring the project: |
| Open_the_Synchronize_view_on_the_project_2=Open the Synchronize view on the project |
| Automatically_import_the_local_resources_into_the_repository_3=Automatically import the local resources into the repository |
| Run_update_4=Run update |
| Do_nothing_5=Do nothing |
| Validate_Connection_on_Finish_7=Validate Location on Finish |
| |
| TagSelectionDialog.Select_a_Tag_1=&Select a branch or version: |
| TagSelectionDialog.recurseOption=Recurse into sub-&folders |
| |
| UpdateSyncAction.Conflicting_changes_found_1=Conflicting changes found |
| UpdateSyncAction.You_have_local_changes_you_are_about_to_overwrite_2=You have local changes you are about to overwrite |
| UpdateSyncAction.Only_update_resources_that_can_be_automatically_merged_3=Only update resources that can be automatically merged |
| UpdateSyncAction.Update_all_resources,_overwriting_local_changes_with_remote_contents_4=Update all resources, overwriting local changes with remote contents |
| UpdateSyncAction.Overwrite_local_changes__5=Overwrite local changes? |
| UpdateSyncAction.You_have_local_changes_you_are_about_to_overwrite._Do_you_wish_to_continue__6=You have local changes you are about to overwrite. Do you wish to continue? |
| |
| Example__1=Example: |
| Text_Labels_12=T&ext |
| Select_the_format_for_file,_folders,_and_project_text_labels__13=Select the format for file, folders, and project text labels: |
| &File_Format__14=&File Format: |
| Add_&Variables_15=Add &Variables... |
| F&older_Format__16=F&older Format: |
| Add_Varia&bles_17=Add Varia&bles... |
| &Project_Format__18=&Project Format: |
| Add_Variable&s_19=Add Variable&s... |
| &Label_decoration_for_outgoing__20=Di&rty flag: |
| Label_decorat&ion_for_added__22=Added f&lag: |
| Icon_Overlays_24=&Icons |
| Sho&w_outgoing_25=Indicate is out&going |
| Show_has_&remote_26=Indicate &has remote |
| S&how_is_added_27=Indi&cate is added |
| &Compute_deep_outgoing_state_for_folders_(disabling_this_will_improve_decorator_performance)_28=&Compute deep outgoing state for folders (disabling this will improve decorator performance) |
| Select_the_&variables_to_add_to_the_decoration_format__30=Select the &variables to add to the decoration format: |
| Add_Variables_31=Add Variables |
| name_of_the_resource_being_decorated_34=name of the resource being decorated |
| the_tag_applied_to_the_resource_(version,_branch,_or_date)_35=the tag applied to the resource (version, branch, or date) |
| the_repository_location__s_hostname_36=the repository location\'s hostname |
| the_connection_method_(e.g._pserver,_ssh)_37=the connection method (e.g. pserver, ssh) |
| user_name_for_the_connection_38=user name for the connection |
| repository_home_directory_on_server_39=repository home directory on server |
| root_relative_directory_40=root relative directory |
| flag_indicating_that_the_folder_has_a_child_resource_with_outgoing_changes_41=flag indicating that the folder has a child resource with outgoing changes |
| name_of_the_resource_being_decorated_42=name of the resource being decorated |
| the_tag_applied_to_the_resource_43=the tag applied to the resource |
| keyword_substitution_rule_for_the_resource_44=keyword subsitution rule for the resource |
| last_revision_loaded_into_workspace_45=last revision loaded into workspace |
| flag_indicating_that_the_file_has_outgoing_changes_46=flag indicating that the file has outgoing changes |
| flag_indicating_that_the_file_has_been_added_to_the_server_47=flag indicating that the file has been added to the server |
| |
| ExtMethodPreferencePage_message=These variables define the external connection program to use with the \'ext\' connection method. These values should be the same as the \'ext\' CVS command-line environment variable settings. |
| ExtMethodPreferencePage_CVS_RSH=CVS_&RSH: |
| ExtMethodPreferencePage_Browse=&Browse... |
| ExtMethodPreferencePage_Details=Select a program or script |
| ExtMethodPreferencePage_CVS_RSH_Parameters=&Parameters: |
| ExtMethodPreferencePage_Add_Variable=&Add Variable... |
| ExtMethodPreferencePage_CVS_SERVER__7=CVS_&SERVER: |
| UpdateMergeActionProblems_merging_remote_resources_into_workspace_1=Problems merging remote resources into workspace |
| UpdateMergeActionProblems_merging_remote_resources_into_workspace_2=Problems merging remote resources into workspace |
| |
| TagConfigurationDialog.1=Configure Branches and Versions for {0} |
| TagConfigurationDialog.2=Configure Branches and Versions for {0} projects |
| TagConfigurationDialog.4=Configure tags you will see in the workbench. |
| TagConfigurationDialog.5=&Browse files for tags: |
| TagConfigurationDialog.6=&New tags found in the selected files: |
| TagConfigurationDialog.7=Remembered &tags for these projects: |
| TagConfigurationDialog.8=&Add Checked Tags |
| TagConfigurationDialog.9=&Remove |
| TagConfigurationDialog.10=Re&move All |
| TagConfigurationDialog.11=&List of files to be automatically examined when refreshing tags: |
| TagConfigurationDialog.12=A&dd Selected Files |
| TagConfigurationDialog.13=Rem&ove |
| TagConfigurationDialog.14=Error fetching tags from remote CVS files |
| TagConfigurationDialog.20=&Refresh from Repository |
| TagConfigurationDialog.21=&Configure Tags |
| TagConfigurationDialog.22=Updating Tags |
| |
| ChangeListener.Deleting_CVS_folders_1=Deleting CVS folders |
| ChangeListener.Folders_cannot_be_deleted_from_a_CVS_server_from_the_client._To_delete_the_folder_2=Folders cannot be deleted from a CVS server from the client. To delete the folder |
| ChangeListener.Do_not_ask_me_about_this_again_3=Do not ask me about this again |
| ConfigureTagsFromRepoViewConfigure_Tag_Error_1=Configure Tag Error |
| RemoteRootAction.label=Discard location |
| RemoteRootAction.Unable_to_Discard_Location_1=Unable to Discard Location |
| RemoteRootAction.Projects_in_the_local_workspace_are_shared_with__2=Projects in the local workspace are shared with {0}. This location cannot be discarded until all local projects are disconnected from it. |
| RemoveRootAction.removeRoot_3=RemoveRootAction.removeRoot |
| RemoteRootAction.The_projects_that_are_shared_with_the_above_repository_are__4=The projects that are shared with the above repository are: |
| |
| BranchCategory.Branches_1=Branches |
| GroupedByVersionCategory.Versions_1=Versions |
| VersionCategory.Versions_1=Versions |
| ModulesCategory.label=Modules |
| HistoryView.[...]_4=[...] |
| |
| CVSProjectPropertiesPage.connectionType=Connection type: |
| CVSProjectPropertiesPage.user=User: |
| CVSProjectPropertiesPage.Select_a_Repository_1=Select a Repository |
| CVSProjectPropertiesPage.Select_a_CVS_repository_location_to_share_the_project_with__2=Select a compatible CVS repository location to share the project with: |
| CVSProjectPropertiesPage.Change_Sharing_5=&Change Sharing... |
| CVSProjectPropertiesPage.fetchAbsentDirectoriesOnUpdate=&Fetch absent or new directories when updating |
| CVSProjectPropertiesPage.configureForWatchEdit=Enable watch/edit for this project |
| CVSProjectPropertiesPage.progressTaskName=Updating project's CVS properties |
| CVSProjectPropertiesPage.setReadOnly=Setting all files read-only |
| CVSProjectPropertiesPage.clearReadOnly=Setting all files writable |
| CVSRepositoryPropertiesPage.Confirm_Project_Sharing_Changes_1=Confirm Project Sharing Changes |
| CVSRepositoryPropertiesPage.There_are_projects_in_the_workspace_shared_with_this_repository_2=There are projects in the workspace shared with this repository. The projects will be updated with the new information that you have entered |
| CVSRepositoryPropertiesPage.sharedProject=The projects that are shared with {0} are: |
| CVSRepositoryPropertiesPage.useDefaultProgramName=Expect the &default program name "cvs" in text message prefixes from this server |
| CVSRepositoryPropertiesPage.useProgramName=Expect a custom &program name: |
| CVSRepositoryPropertiesPage.useLocationAsLabel=Use the &repository identification string as the label |
| CVSRepositoryPropertiesPage.useCustomLabel=Use a custom &label: |
| |
| CVSProjectSetSerializer.Confirm_Overwrite_Project_8=Confirm Overwrite Project |
| CVSProjectSetSerializer.The_project_{0}_already_exists._Do_you_wish_to_overwrite_it__9=The project {0} already exists. Do you wish to overwrite it? |
| |
| IgnoreResourcesDialog.titleSingle=Add {0} to .cvsignore |
| IgnoreResourcesDialog.titleMany=Add {0} resources to .cvsignore |
| IgnoreResourcesDialog.prompt=Select what to add to the .cvsignore file(s): |
| IgnoreResourcesDialog.addNameEntryButton=Resource(s) by name |
| IgnoreResourcesDialog.addNameEntryExample=Examples: file1.so, file2.so, .rcfile, bin |
| IgnoreResourcesDialog.addExtensionEntryButton=Wildcard extension |
| IgnoreResourcesDialog.addExtensionEntryExample=Examples: *.so, *.rcfile, bin |
| IgnoreResourcesDialog.addCustomEntryButton=Custom pattern |
| IgnoreResourcesDialog.addCustomEntryExample=The wildcard characters ''*'' and ''?'' are permitted. |
| IgnoreResourcesDialog.patternMustNotBeEmpty=Pattern must not be empty. |
| IgnoreResourcesDialog.patternDoesNotMatchFile=Pattern does not match all selected resources: e.g. {0} |
| |
| ContentAction.Confirm_Long_Operation_1=Confirm Long Operation |
| ContentAction.Changing_this_setting_will_involve_contacting_the_server_and_may_be_long-running_2=Changing this setting will involve contacting the server and may be long-running |
| |
| CVSProjectPropertiesPage.You_can_change_the_sharing_of_this_project_to_another_repository_location._However,_this_is_only_possible_if_the_new_location_is___compatible___(on_the_same_host_with_the_same_repository_path)._1=You can change the sharing of this project to another repository location. However, this is only possible if the new location is \"compatible\" (on the same host with the same repository path). |
| |
| ConfigurationWizardMainPage.Location_1=Location |
| ConfigurationWizardMainPage.Authentication_2=Authentication |
| ConfigurationWizardMainPage.Connection_3=Connection |
| AlternateUserValidationDialog.Enter_Password_2=Enter Password |
| AlternateUserValidationDialog.OK_6=OK |
| AlternateUserValidationDialog.Cancel_7=Cancel |
| AlternateUserValidationDialog.message=Enter the password for {0}: |
| WorkbenchUserAuthenticator.The_operation_was_canceled_by_the_user_1=The operation was canceled by the user |
| CVSCatchupReleaseViewer.No_workspace_file_1=No workspace file |
| CVSPreferencesPage.Timeout_must_not_be_negative_1=Timeout must not be negative |
| CVSPreferencesPage.Timeout_must_be_a_number_2=Timeout must be a number |
| CVSCatchupReleaseViewer.Select_&Outgoing_Additions_1=Select New Reso&urces |
| ForceCommitSyncAction.Outgoing_Changes_Not_Added_1=Outgoing Changes Not Added |
| ForceCommitSyncAction.You_have_chosen_to_commit_new_resources_which_have_not_been_added_to_version_control._Do_you_wish_to_add_them_to_version_control_now__2=You have chosen to commit new resources which have not been added to version control. Do you wish to add them to version control now? |
| |
| WorkingSetSelectionArea.workingSetOther=&Other... |
| ListSelectionArea.selectAll=&Select All |
| ListSelectionArea.deselectAll=&Deselect All |
| |
| RestoreFromRepositoryWizard.fileSelectionPageTitle=Restore from Repository |
| RestoreFromRepositoryWizard.fileSelectionPageDescription=Select the revision of each file that should be restored. |
| RestoreFromRepositoryFileSelectionPage.fileSelectionPaneTitle={0} - Select file to be restored: |
| RestoreFromRepositoryFileSelectionPage.revisionSelectionPaneTitle={0} - Check revision to be restored: |
| RestoreFromRepositoryFileSelectionPage.fileToRestore={0} ({1} to be restored) |
| RestoreFromRepositoryFileSelectionPage.fileContentPaneTitle={0} {1} in ''{2}'' |
| RestoreFromRepositoryFileSelectionPage.emptyRevisionPane=Remote revisions of selected file: |
| RestoreFromRepositoryFileSelectionPage.fileExists=File ''{0}'' already exists locally. |
| RestoreFromRepositoryFileSelectionPage.revisionIsDeletion=Revision {0} of {1} is the deletion and can not be restored. Select another revision of this file. |
| RestoreFromRepositoryAction.noFilesTitle=No Deleted Files Found |
| RestoreFromRepositoryAction.noFilesMessage=There were no deleted files found on the repository in folder ''{0}''. |
| |
| RepositoryRoot.folderInfoMissing=Local folder ''{0}'' is not properly mapped to a remote folder. |
| |
| RepositoriesViewContentHandler.unmatchedTag=No matching end tag found for tag ''{0}'' while reading repositories View configuration file. |
| RepositoriesViewContentHandler.missingAttribute=Required attribute ''{1}'' missing from tag ''{0}'' while reading repositories View configuration file. |
| RepositoriesViewContentHandler.errorCreatingRoot=An error occurred trying to create repository ''{0}''. |
| |
| CVSWorkingSetFolderSelectionPage.projectSelectionPageTitle=CVS Working Set |
| CVSWorkingSetFolderSelectionPage.projectSelectionPageDescription=Enter a working set name and select the working set folders. |
| CVSWorkingSetFolderSelectionPage.name=&Working set name: |
| CVSWorkingSetFolderSelectionPage.treeLabel=Working &set contents: |
| CVSWorkingSetFolderSelectionPage.refresh=&Refresh Contents |
| CVSWorkingSetFolderSelectionPage.invalidWorkingSetName=The name must contain only letters and digits. |
| CVSWorkingSetFolderSelectionPage.duplicateWorkingSetName=A working set of the specific name already exists. |
| CVSWorkingSetFolderSelectionPage.mustSelectFolder=At least one folder must be checked. |
| |
| WorkingSetSelectionDialog.title= Select CVS Working Set |
| WorkingSetSelectionDialog.title.multiSelect= Select CVS Working Sets |
| WorkingSetSelectionDialog.message= &Select a CVS working set: |
| WorkingSetSelectionDialog.message.multiSelect= &Select CVS working sets: |
| WorkingSetSelectionDialog.detailsButton.label= &Edit... |
| WorkingSetSelectionDialog.newButton.label= &New... |
| WorkingSetSelectionDialog.removeButton.label= &Remove |
| |
| RefreshTagsAction.title=Refresh Branch and Version Tags? |
| RefreshTagsAction.message=Repository ''{0}'' has {1} projects to refresh. Continue? |
| |
| WatchEditPreferencePage.description=Settings for CVS Watch/Edit. |
| WatchEditPreferencePage.checkoutReadOnly=&Configure projects to use Watch/Edit on checkout |
| WatchEditPreferencePage.validateEditSaveAction=When read-only files are modified in an editor |
| WatchEditPreferencePage.edit=Send a cvs &edit notification to the server |
| WatchEditPreferencePage.highjack=Edit the file &without informing the server |
| |
| Uneditaction.confirmMessage=Overwrite local changes to edited files? |
| Uneditaction.confirmTitle=Confirm Unedit |
| |
| FileModificationValidator.promptTitle=CVS Edit Files? |
| FileModificationValidator.promptMessage=There are read-only files being modified. Should a 'cvs edit' be performed? |
| FileModificationValidator.vetoMessage=User vetoed file modification |
| |
| RefreshRemoteProjectWizard.title=Refresh Branches |
| RefreshRemoteProjectSelectionPage.pageTitle=Select Projects |
| RefreshRemoteProjectSelectionPage.pageDescription=Select the remote projects whose tags should be refreshed. |
| RefreshRemoteProjectSelectionPage.selectRemoteProjects=This wizard helps discover the tags associated with one or more remote projects. &Check the projects whose tags you wish to refresh. |
| RefreshRemoteProjectSelectionPage.noWorkingSet=Do not &use a working set |
| RefreshRemoteProjectSelectionPage.workingSet=Select a &working set (matching projects will be checked): |
| |
| EditorsView.file=File name |
| EditorsView.user=User name |
| EditorsView.date=Date |
| EditorsView.computer=Computer name |
| |
| EditorsDialog.title=Editors |
| EditorsDialog.question=The resource already has editors. Do you still want to edit the resource? |
| EditorsAction.classNotInitialized={0} not initialized |
| |
| TargetLocationSelectionDialog.projectNameLabel=&Project Name: |
| TargetLocationSelectionDialog.useDefaultLabel=Use default &workspace location |
| TargetLocationSelectionDialog.locationLabel=&Location: |
| TargetLocationSelectionDialog.parentDirectoryLabel=&Directory: |
| TargetLocationSelectionDialog.browseLabel=&Browse... |
| TargetLocationSelectionDialog.messageForSingle=Select the parent directory for project {0}. |
| TargetLocationSelectionDialog.messageForMulti=Select the parent directory for the {0} projects. |
| TagetLocationSelectionDialog.locationEmpty=Project contents directory must be specified. |
| TagetLocationSelectionDialog.invalidLocation=Invalid location path. |
| TagetLocationSelectionDialog.alreadyExists=Project {0} already exists. |
| |
| SynchronizeProjectsDialog.title=Synchronize CVS Projects |
| SynchronizeProjectsDialog.selectProjects=Projects to be synchronized |
| SynchronizeProjectsDialog.syncOutgoingChanges=Only synchronize projects with outgoing &changes |
| SynchronizeProjectsDialog.allSharedProjects=Include &all projects shared with CVS |
| SynchronizeProjectsDialog.sharedWorkingSetProjects=Include &working set resources shared with CVS: |
| |
| RemoteFileEditorInput.fullPathAndRevision={0} {1} |
| |
| CheckoutOperation.thisResourceExists=The resource ''{0}'' already exists in the workspace and will be deleted. Proceed with the check out of ''{1}''? |
| CheckoutOperation.thisExternalFileExists=The folder ''{0}'' exists in the local file system and will be deleted. Proceed with the check out of ''{1}''? |
| CheckoutOperation.confirmOverwrite=Confirm Overwrite |
| CheckoutOperation.scrubbingProject=Scrubbing project ''{0}''. |
| CheckoutOperation.refreshingProject=Configuring project ''{0}''. |
| |
| CheckoutSingleProjectOperation.taskname=Checking out ''{0}'' from CVS |
| CheckoutMultipleProjectsOperation.taskName=Checking out {0} folders from CVS |
| |
| CheckoutIntoOperation.taskname=Checking out {0} folders from CVS into ''{1}'' |
| CheckoutIntoOperation.targetIsFile=Folder ''{0}'' cannot be checked out because file ''{1}'' is in the way. |
| CheckoutIntoOperation.targetIsFolder=Folder ''{0}'' cannot be checked out because folder ''{1}'' is in the way. |
| CheckoutIntoOperation.targetIsPrunedFolder=Folder ''{0}'' cannot be checked out because it conflicts with the pruned folder ''{1}''. |
| CheckoutIntoOperation.mappingAlreadyExists=Cannot checkout remote folder ''{0}'' into ''{1}'' because local folder ''{2}'' is already mapped to remote folder ''{0}''. |
| CheckoutIntoOperation.cancelled=Checkout of ''{1}'' cancelled by user. |
| CheckoutIntoOperation.overwriteMessage=Folder ''{0}'' already exists and will be deleted. Continue? |
| |
| AddToWorkspace.taskName1=Checking out ''{0}'' from CVS |
| AddToWorkspace.taskNameN=Checking out {0} folders from CVS |
| |
| CheckoutAsAction.checkoutFailed=Problems encountered performing checkout |
| |
| CheckoutAsAction.enterProjectTitle=Check Out {0} As... |
| CheckoutAsAction.enterLocationTitle=Check Out {0} Projects As... |
| CheckoutAsAction.taskname=Checking out "{0}" from CVS as "{1}" |
| CheckoutAsAction.multiCheckout=Checking out {0} projects from CVS |
| |
| CheckoutAsWizard.title=Check Out As |
| CheckoutAsWizard.error=Problems encountered performing checkout |
| CheckoutAsMainPage.title=Check Out As |
| CheckoutAsMainPage.description=Select the method of check out |
| CheckoutAsMainPage.singleFolder=Choose how to check out folder ''{0}'' |
| CheckoutAsMainPage.asConfiguredProject=Check out as a project &configured using the New Project Wizard |
| CheckoutAsMainPage.asSimpleProject=Check out as a &project in the &workspace |
| CheckoutAsMainPage.projectNameLabel=&Project Name: |
| CheckoutAsMainPage.multipleFolders=Choose how to check out the {0} folders |
| CheckoutAsMainPage.asProjects=Check out into the &workspace as projects |
| CheckoutAsMainPage.intoProject=Check out &into an existing project |
| |
| CheckoutAsLocationSelectionPage.title=Check Out As |
| CheckoutAsLocationSelectionPage.description=Select the project location |
| CheckoutAsLocationSelectionPage.useDefaultLabel=Use default &workspace location |
| CheckoutAsLocationSelectionPage.locationLabel=&Location: |
| CheckoutAsLocationSelectionPage.parentDirectoryLabel=&Directory: |
| CheckoutAsLocationSelectionPage.browseLabel=&Browse... |
| CheckoutAsLocationSelectionPage.locationEmpty=Project contents directory must be specified. |
| CheckoutAsLocationSelectionPage.invalidLocation=Invalid location path. |
| CheckoutAsLocationSelectionPage.messageForSingle=Select the parent directory for project {0}. |
| CheckoutAsLocationSelectionPage.messageForMulti=Select the parent directory for the {0} projects. |
| |
| CheckoutAsProjectSelectionPage.title=Check Out Into |
| CheckoutAsProjectSelectionPage.description=Select the local folder that is the target of the checkout operation. |
| CheckoutAsProjectSelectionPage.name=Target folder &name: |
| CheckoutAsProjectSelectionPage.treeLabel=&Parent of target folder: |
| CheckoutAsProjectSelectionPage.showLabel=&Filter project list: |
| CheckoutAsProjectSelectionPage.recurse=&Checkout subfolders |
| CheckoutAsProjectSelectionPage.showAll=Show all valid target projects |
| CheckoutAsProjectSelectionPage.showUnshared=Show unshared projects |
| CheckoutAsProjectSelectionPage.showSameRepo=Show projects shared with the same repository |
| CheckoutAsProjectSelectionPage.invalidFolderName=''{0}'' is not a valid folder name |
| |
| TargetLocationSelectionDialog.projectNameLabel=&Project Name: |
| TargetLocationSelectionDialog.useDefaultLabel=Use default &workspace location |
| TargetLocationSelectionDialog.locationLabel=&Location: |
| TargetLocationSelectionDialog.parentDirectoryLabel=&Directory: |
| TargetLocationSelectionDialog.browseLabel=&Browse... |
| TargetLocationSelectionDialog.messageForSingle=Select the parent directory for project {0}. |
| TargetLocationSelectionDialog.messageForMulti=Select the parent directory for the {0} projects. |
| TagetLocationSelectionDialog.locationEmpty=Project contents directory must be specified. |
| TagetLocationSelectionDialog.invalidLocation=Invalid location path. |
| TagetLocationSelectionDialog.alreadyExists=Project {0} already exists. |
| CheckoutIntoWizard.title=Checkout Into |
| CheckoutIntoWizard.projectSelectionPageTitle=Select local folder |
| CheckoutIntoWizard.projectSelectionPageDescription=Select the local folder that is the target of the checkout operation. |
| CheckoutIntoWizard.error=Checkout Error |
| CheckoutIntoWizard.thisResourceExists=The resource ''{0}'' already exists in the workspace. Overwrite? |
| CheckoutIntoWizard.confirmOverwrite=Confirm Overwrite |
| CheckoutIntoWizard.mappingAlreadyExists=Cannot add remote folder ''{0}'' to project ''{1}'' as ''{2}'' because local folder ''{3}'' is already mapped to that folder. |
| CheckoutIntoProjectSelectionPage.description=Choose the name and parent folder where ''{0}'' should be checked out to. |
| CheckoutIntoProjectSelectionPage.name=Target folder &name: |
| CheckoutIntoProjectSelectionPage.treeLabel=&Parent of target folder: |
| CheckoutIntoProjectSelectionPage.showLabel=&Filter project list: |
| CheckoutIntoProjectSelectionPage.showAll=Show all valid target projects |
| CheckoutIntoProjectSelectionPage.showUnshared=Show unshared projects |
| CheckoutIntoProjectSelectionPage.showSameRepo=Show projects shared with the same repository |
| CheckoutIntoProjectSelectionPage.recurse=&Checkout subfolders |
| CheckoutIntoProjectSelectionPage.invalidFolderName=''{0}'' is not a valid folder name |
| |
| HasProjectMetaFile.taskName=Looking for a remote meta file |
| TagFromWorkspace.taskName=Tagging from workspace |
| TagFromRepository.taskName=Tagging from repository |
| UpdateOnlyMergeable.taskName=Updating mergeable changes |
| UpdateDialog.overwriteTitle=Overwrite Local Changes? |
| UpdateDialog.overwriteMessage=Some conflicting files cannot be merged automatically with the update action. Should these resources be updated, overwriting any local changes? |
| ReplaceOperation.taskName=Replacing... |
| UpdateOperation.taskName=Updating... |
| |
| SafeUpdateAction.warnFilesWithConflictsTitle=Non-mergeable files |
| SafeUpdateAction.warnFilesWithConflictsDescription=Some conflicting files cannot be merged automatically with the update action. They contain conflicting changes that will have to be merged manually. Use the Synchronize View to find the conflicts then merge the changes in a compare editor. |
| |
| SafeUpdateAction.warnFilesWithConflictsTitle=Non-mergeable files |
| SafeUpdateAction.warnFilesWithConflictsDescription=Some conflicting files cannot be merged automatically with the update action. They contain conflicting changes that will have to be merged manually. Use the Synchronize View to find the conflicts then merge the changes in a compare editor. |
| |
| Error.unableToShowSyncView=Error opening Synchronize View. Please ensure that the Team plugin is installed correctly. |
| ShowAnnotationAction.1=Unexpected response from CVS Server: {0} |
| |
| CVSSubscriberAction.jobName=Performing CVS operation on {0} resources. |
| UpdateAction.jobName=Performing CVS update on {0} resources. |
| MergeUpdateAction.jobName=Performing CVS merge on {0} resources. |
| MergeUpdateAction.invalidSubscriber=Invalid subscriber: {0} |
| CommitAction.jobName=Performing CVS commit on {0} resources. |
| WorkInProgressPreferencePage.0=CVS Work In Progress |
| WorkInProgressPreferencePage.1=Preferences for enabling features that are not complete: |
| WorkInProgressPreferencePage.2=Enable background fetching of resources in the CVS Repositories view |
| WorkInProgressPreferencePage.3=Enable operations to be run in the background (e.g. checkout, update, commit) |
| WorkInProgressPreferencePage.4=Enable the CVS sync actions to open the new sync view |
| CheckoutProjectOperation.8=Checking out ''{0}'' into project ''{0}'' |
| CheckoutProjectOperation.9=Checking out ''{0}'' into {1} projects |
| CVSOperation.0=Errors occured in {0} of {1} operations. |
| CVSDecorator.exceptionMessage=Errors occured while applying CVS decorations to resources. |
| FetchMembersOperation.0=Fetching members of {0}; |
| |
| RemoteRevisionQuickDiffProvider.readingFile=Error reading remote file |
| RemoteRevisionQuickDiffProvider.closingFile=Error closing remote file |
| RemoteRevisionQuickDiffProvider.fetchingFile=CVS QuickDiff: fetching remote contents for ''{0}'' |
