| /******************************************************************** |
| * |
| * Standard register and bit definitions for the Texas Instruments |
| * MSP430 microcontroller. |
| * |
| * This file supports assembler and C development for |
| * MSP430x415 and MSP430x417 devices. |
| * |
| * Texas Instruments, Version 1.4 |
| * |
| * Rev. 1.0, - |
| * Rev. 1.1, Removed unused def of TASSEL2 |
| * Rev. 1.2, Added VLD bits in SVS module |
| * Rev. 1.3, Removed definitions for BTRESET |
| * Rev. 1.4, added definitions for Interrupt Vectors xxIV |
| * |
| ********************************************************************/ |
| |
| #ifndef __msp430x41x |
| #define __msp430x41x |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| /*----------------------------------------------------------------------------*/ |
| /* PERIPHERAL FILE MAP */ |
| /*----------------------------------------------------------------------------*/ |
| |
| /* External references resolved by a device-specific linker command file */ |
| #define SFR_8BIT(address) extern volatile unsigned char address |
| #define SFR_16BIT(address) extern volatile unsigned int address |
| |
| |
| /************************************************************ |
| * STANDARD BITS |
| ************************************************************/ |
| |
| #define BIT0 (0x0001) |
| #define BIT1 (0x0002) |
| #define BIT2 (0x0004) |
| #define BIT3 (0x0008) |
| #define BIT4 (0x0010) |
| #define BIT5 (0x0020) |
| #define BIT6 (0x0040) |
| #define BIT7 (0x0080) |
| #define BIT8 (0x0100) |
| #define BIT9 (0x0200) |
| #define BITA (0x0400) |
| #define BITB (0x0800) |
| #define BITC (0x1000) |
| #define BITD (0x2000) |
| #define BITE (0x4000) |
| #define BITF (0x8000) |
| |
| /************************************************************ |
| * STATUS REGISTER BITS |
| ************************************************************/ |
| |
| #define C (0x0001) |
| #define Z (0x0002) |
| #define N (0x0004) |
| #define V (0x0100) |
| #define GIE (0x0008) |
| #define CPUOFF (0x0010) |
| #define OSCOFF (0x0020) |
| #define SCG0 (0x0040) |
| #define SCG1 (0x0080) |
| |
| /* Low Power Modes coded with Bits 4-7 in SR */ |
| |
| #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ |
| #define LPM0 (CPUOFF) |
| #define LPM1 (SCG0+CPUOFF) |
| #define LPM2 (SCG1+CPUOFF) |
| #define LPM3 (SCG1+SCG0+CPUOFF) |
| #define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF) |
| /* End #defines for assembler */ |
| |
| #else /* Begin #defines for C */ |
| #define LPM0_bits (CPUOFF) |
| #define LPM1_bits (SCG0+CPUOFF) |
| #define LPM2_bits (SCG1+CPUOFF) |
| #define LPM3_bits (SCG1+SCG0+CPUOFF) |
| #define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF) |
| |
| #include <In430.h> |
| |
| #define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */ |
| #define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */ |
| #define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */ |
| #define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */ |
| #define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */ |
| #define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */ |
| #define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */ |
| #define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */ |
| #define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */ |
| #define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */ |
| #endif /* End #defines for C */ |
| |
| /************************************************************ |
| * PERIPHERAL FILE MAP |
| ************************************************************/ |
| |
| /************************************************************ |
| * SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS |
| ************************************************************/ |
| |
| SFR_8BIT(IE1); /* Interrupt Enable 1 */ |
| #define WDTIE (0x01) |
| #define OFIE (0x02) |
| #define NMIIE (0x10) |
| #define ACCVIE (0x20) |
| |
| SFR_8BIT(IFG1); /* Interrupt Flag 1 */ |
| #define WDTIFG (0x01) |
| #define OFIFG (0x02) |
| #define NMIIFG (0x10) |
| |
| SFR_8BIT(IE2); /* Interrupt Enable 2 */ |
| #define BTIE (0x80) |
| |
| SFR_8BIT(IFG2); /* Interrupt Flag 2 */ |
| #define BTIFG (0x80) |
| |
| /************************************************************ |
| * WATCHDOG TIMER |
| ************************************************************/ |
| #define __MSP430_HAS_WDT__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(WDTCTL); /* Watchdog Timer Control */ |
| /* The bit names have been prefixed with "WDT" */ |
| #define WDTIS0 (0x0001) |
| #define WDTIS1 (0x0002) |
| #define WDTSSEL (0x0004) |
| #define WDTCNTCL (0x0008) |
| #define WDTTMSEL (0x0010) |
| #define WDTNMI (0x0020) |
| #define WDTNMIES (0x0040) |
| #define WDTHOLD (0x0080) |
| |
| #define WDTPW (0x5A00) |
| |
| /* WDT-interval times [1ms] coded with Bits 0-2 */ |
| /* WDT is clocked by fSMCLK (assumed 1MHz) */ |
| #define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */ |
| #define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */ |
| #define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */ |
| #define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */ |
| /* WDT is clocked by fACLK (assumed 32KHz) */ |
| #define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */ |
| #define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */ |
| #define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */ |
| #define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */ |
| /* Watchdog mode -> reset after expired time */ |
| /* WDT is clocked by fSMCLK (assumed 1MHz) */ |
| #define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */ |
| #define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */ |
| #define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */ |
| #define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */ |
| /* WDT is clocked by fACLK (assumed 32KHz) */ |
| #define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */ |
| #define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */ |
| #define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */ |
| #define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */ |
| |
| /* INTERRUPT CONTROL */ |
| /* These two bits are defined in the Special Function Registers */ |
| /* #define WDTIE 0x01 */ |
| /* #define WDTIFG 0x01 */ |
| |
| /************************************************************ |
| * DIGITAL I/O Port1/2 |
| ************************************************************/ |
| #define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */ |
| #define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(P1IN); /* Port 1 Input */ |
| SFR_8BIT(P1OUT); /* Port 1 Output */ |
| SFR_8BIT(P1DIR); /* Port 1 Direction */ |
| SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */ |
| SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */ |
| SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */ |
| SFR_8BIT(P1SEL); /* Port 1 Selection */ |
| |
| SFR_8BIT(P2IN); /* Port 2 Input */ |
| SFR_8BIT(P2OUT); /* Port 2 Output */ |
| SFR_8BIT(P2DIR); /* Port 2 Direction */ |
| SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */ |
| SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */ |
| SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */ |
| SFR_8BIT(P2SEL); /* Port 2 Selection */ |
| |
| /************************************************************ |
| * DIGITAL I/O Port3/4 |
| ************************************************************/ |
| #define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */ |
| #define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(P3IN); /* Port 3 Input */ |
| SFR_8BIT(P3OUT); /* Port 3 Output */ |
| SFR_8BIT(P3DIR); /* Port 3 Direction */ |
| SFR_8BIT(P3SEL); /* Port 3 Selection */ |
| |
| SFR_8BIT(P4IN); /* Port 4 Input */ |
| SFR_8BIT(P4OUT); /* Port 4 Output */ |
| SFR_8BIT(P4DIR); /* Port 4 Direction */ |
| SFR_8BIT(P4SEL); /* Port 4 Selection */ |
| |
| /************************************************************ |
| * DIGITAL I/O Port5/6 |
| ************************************************************/ |
| #define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */ |
| #define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(P5IN); /* Port 5 Input */ |
| SFR_8BIT(P5OUT); /* Port 5 Output */ |
| SFR_8BIT(P5DIR); /* Port 5 Direction */ |
| SFR_8BIT(P5SEL); /* Port 5 Selection */ |
| |
| SFR_8BIT(P6IN); /* Port 6 Input */ |
| SFR_8BIT(P6OUT); /* Port 6 Output */ |
| SFR_8BIT(P6DIR); /* Port 6 Direction */ |
| SFR_8BIT(P6SEL); /* Port 6 Selection */ |
| |
| /************************************************************ |
| * BASIC TIMER |
| ************************************************************/ |
| #define __MSP430_HAS_BT__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(BTCTL); /* Basic Timer Control */ |
| /* The bit names have been prefixed with "BT" */ |
| #define BTIP0 (0x01) |
| #define BTIP1 (0x02) |
| #define BTIP2 (0x04) |
| #define BTFRFQ0 (0x08) |
| #define BTFRFQ1 (0x10) |
| #define BTDIV (0x20) /* fCLK2 = ACLK:256 */ |
| #define BTHOLD (0x40) /* BT1 is held if this bit is set */ |
| #define BTSSEL (0x80) /* fBT = fMCLK (main clock) */ |
| |
| SFR_8BIT(BTCNT1); /* Basic Timer Count 1 */ |
| SFR_8BIT(BTCNT2); /* Basic Timer Count 2 */ |
| |
| /* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */ |
| #define BT_fCLK2_ACLK (0x00) |
| #define BT_fCLK2_ACLK_DIV256 (BTDIV) |
| #define BT_fCLK2_MCLK (BTSSEL) |
| |
| /* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */ |
| #define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */ |
| #define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */ |
| #define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */ |
| #define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */ |
| #define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */ |
| #define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */ |
| #define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */ |
| #define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */ |
| /* Frequency of LCD coded with Bits 3-4 */ |
| #define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */ |
| #define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */ |
| #define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */ |
| #define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 */ |
| /* LCD frequency values with fBT=fACLK */ |
| #define BT_fLCD_1K (0x00) /* fACLK:32 (default) */ |
| #define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */ |
| #define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */ |
| #define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 */ |
| /* LCD frequency values with fBT=fMCLK */ |
| #define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */ |
| #define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */ |
| #define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 */ |
| /* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */ |
| /* fBT=fACLK is thought for longer interval times */ |
| #define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */ |
| #define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */ |
| #define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */ |
| #define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */ |
| #define BT_ADLY_1 (BTIP2) /* 1ms " */ |
| #define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */ |
| #define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */ |
| #define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */ |
| #define BT_ADLY_16 (BTDIV) /* 16ms " */ |
| #define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */ |
| #define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */ |
| #define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */ |
| #define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */ |
| #define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */ |
| #define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */ |
| #define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */ |
| /* fCLK2=fMCLK (1MHz) is thought for short interval times */ |
| /* the timing for short intervals is more precise than ACLK */ |
| /* NOTE */ |
| /* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */ |
| /* Too low interval time results in interrupts too frequent for the processor to handle! */ |
| #define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */ |
| #define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */ |
| #define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */ |
| #define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */ |
| #define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */ |
| #define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */ |
| #define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */ |
| #define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */ |
| |
| /* Reset/Hold coded with Bits 6-7 in BT(1)CTL */ |
| /* this is for BT */ |
| //#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set */ |
| //#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */ |
| /* this is for BT1 */ |
| #define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */ |
| #define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */ |
| |
| /* INTERRUPT CONTROL BITS */ |
| /* #define BTIE 0x80 */ |
| /* #define BTIFG 0x80 */ |
| |
| /************************************************************ |
| * SYSTEM CLOCK, FLL+ (x41x) |
| ************************************************************/ |
| #define __MSP430_HAS_FLLPLUS_SMALL__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(SCFI0); /* System Clock Frequency Integrator 0 */ |
| #define FN_2 (0x04) /* fDCOCLK = 1.4-12MHz*/ |
| #define FN_3 (0x08) /* fDCOCLK = 2.2-17Mhz*/ |
| #define FN_4 (0x10) /* fDCOCLK = 3.2-25Mhz*/ |
| #define FN_8 (0x20) /* fDCOCLK = 5-40Mhz*/ |
| #define FLLD0 (0x40) /* Loop Divider Bit : 0 */ |
| #define FLLD1 (0x80) /* Loop Divider Bit : 1 */ |
| |
| #define FLLD_1 (0x00) /* Multiply Selected Loop Freq. By 1 */ |
| #define FLLD_2 (0x40) /* Multiply Selected Loop Freq. By 2 */ |
| #define FLLD_4 (0x80) /* Multiply Selected Loop Freq. By 4 */ |
| #define FLLD_8 (0xC0) /* Multiply Selected Loop Freq. By 8 */ |
| |
| SFR_8BIT(SCFI1); /* System Clock Frequency Integrator 1 */ |
| SFR_8BIT(SCFQCTL); /* System Clock Frequency Control */ |
| /* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */ |
| /* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */ |
| #define SCFQ_64K (0x01) /* fMCLK=2*fACLK 1+1 to 127+1 is possible */ |
| #define SCFQ_128K (0x03) /* fMCLK=4*fACLK */ |
| #define SCFQ_256K (0x07) /* fMCLK=8*fACLK */ |
| #define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */ |
| #define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */ |
| #define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */ |
| #define SCFQ_4M (0x7F) /* fMCLK=128*fACLK */ |
| #define SCFQ_M (0x80) /* Modulation Disable */ |
| |
| SFR_8BIT(FLL_CTL0); /* FLL+ Control 0 */ |
| #define DCOF (0x01) /* DCO Fault Flag */ |
| #define LFOF (0x02) /* Low Frequency Oscillator Fault Flag */ |
| #define XT1OF (0x04) /* High Frequency Oscillator Fault Flag */ |
| #define OSCCAP0 (0x10) /* XIN/XOUT Cap 0 */ |
| #define OSCCAP1 (0x20) /* XIN/XOUT Cap 1 */ |
| #define XTS_FLL (0x40) /* 1: Selects high-freq. oscillator */ |
| #define DCOPLUS (0x80) /* DCO+ Enable */ |
| |
| #define XCAP0PF (0x00) /* XIN Cap = XOUT Cap = 0pf */ |
| #define XCAP10PF (0x10) /* XIN Cap = XOUT Cap = 10pf */ |
| #define XCAP14PF (0x20) /* XIN Cap = XOUT Cap = 14pf */ |
| #define XCAP18PF (0x30) /* XIN Cap = XOUT Cap = 18pf */ |
| #define OSCCAP_0 (0x00) /* XIN Cap = XOUT Cap = 0pf */ |
| #define OSCCAP_1 (0x10) /* XIN Cap = XOUT Cap = 10pf */ |
| #define OSCCAP_2 (0x20) /* XIN Cap = XOUT Cap = 14pf */ |
| #define OSCCAP_3 (0x30) /* XIN Cap = XOUT Cap = 18pf */ |
| |
| SFR_8BIT(FLL_CTL1); /* FLL+ Control 1 */ |
| #define FLL_DIV0 (0x01) /* FLL+ Divide Px.x/ACLK 0 */ |
| #define FLL_DIV1 (0x02) /* FLL+ Divide Px.x/ACLK 1 */ |
| |
| #define FLL_DIV_1 (0x00) /* FLL+ Divide Px.x/ACLK By 1 */ |
| #define FLL_DIV_2 (0x01) /* FLL+ Divide Px.x/ACLK By 2 */ |
| #define FLL_DIV_4 (0x02) /* FLL+ Divide Px.x/ACLK By 4 */ |
| #define FLL_DIV_8 (0x03) /* FLL+ Divide Px.x/ACLK By 8 */ |
| |
| /* INTERRUPT CONTROL BITS */ |
| /* These two bits are defined in the Special Function Registers */ |
| /* #define OFIFG 0x02 */ |
| /* #define OFIE 0x02 */ |
| |
| /************************************************************ |
| * Brown-Out, Supply Voltage Supervision (SVS) |
| ************************************************************/ |
| #define __MSP430_HAS_SVS__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(SVSCTL); /* SVS Control */ |
| #define SVSFG (0x01) /* SVS Flag */ |
| #define SVSOP (0x02) /* SVS output (read only) */ |
| #define SVSON (0x04) /* Switches the SVS on/off */ |
| #define PORON (0x08) /* Enable POR Generation if Low Voltage */ |
| #define VLD0 (0x10) |
| #define VLD1 (0x20) |
| #define VLD2 (0x40) |
| #define VLD3 (0x80) |
| |
| #define VLDON (0x10) |
| #define VLDOFF (0x00) |
| #define VLD_1_8V (0x10) |
| |
| /************************************************************ |
| * LCD |
| ************************************************************/ |
| #define __MSP430_HAS_LCD4__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(LCDCTL); /* LCD Control */ |
| /* the names of the mode bits are different from the spec */ |
| #define LCDON (0x01) |
| //#define LCDLOWR (0x02) |
| #define LCDSON (0x04) |
| #define LCDMX0 (0x08) |
| #define LCDMX1 (0x10) |
| #define LCDP0 (0x20) |
| #define LCDP1 (0x40) |
| #define LCDP2 (0x80) |
| /* Display modes coded with Bits 2-4 */ |
| #define LCDSTATIC (LCDSON) |
| #define LCD2MUX (LCDMX0+LCDSON) |
| #define LCD3MUX (LCDMX1+LCDSON) |
| #define LCD4MUX (LCDMX1+LCDMX0+LCDSON) |
| /* Group select code with Bits 5-7 Seg.lines Dig.output */ |
| #define LCDSG0 (0x00) /* --------- Port Only (default) */ |
| #define LCDSG0_1 (LCDP0) /* S0 - S15 see Datasheet */ |
| #define LCDSG0_2 (LCDP1) /* S0 - S19 see Datasheet */ |
| #define LCDSG0_3 (LCDP1+LCDP0) /* S0 - S23 see Datasheet */ |
| #define LCDSG0_4 (LCDP2) /* S0 - S27 see Datasheet */ |
| #define LCDSG0_5 (LCDP2+LCDP0) /* S0 - S31 see Datasheet */ |
| #define LCDSG0_6 (LCDP2+LCDP1) /* S0 - S35 see Datasheet */ |
| #define LCDSG0_7 (LCDP2+LCDP1+LCDP0) /* S0 - S39 see Datasheet */ |
| /* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND */ |
| /* MOV #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV #LCDP1,&LCDCTL! */ |
| #define LCDOG1_7 (0x00) /* --------- Port Only (default) */ |
| #define LCDOG2_7 (LCDP0) /* S0 - S15 see Datasheet */ |
| #define LCDOG3_7 (LCDP1) /* S0 - S19 see Datasheet */ |
| #define LCDOG4_7 (LCDP1+LCDP0) /* S0 - S23 see Datasheet */ |
| #define LCDOG5_7 (LCDP2) /* S0 - S27 see Datasheet */ |
| #define LCDOG6_7 (LCDP2+LCDP0) /* S0 - S31 see Datasheet */ |
| #define LCDOG7 (LCDP2+LCDP1) /* S0 - S35 see Datasheet */ |
| #define LCDOGOFF (LCDP2+LCDP1+LCDP0) /* S0 - S39 see Datasheet */ |
| |
| #define LCDMEM_ (0x0091) /* LCD Memory */ |
| #ifdef __ASM_HEADER__ |
| #define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */ |
| #else |
| #define LCDMEM ((char*) LCDMEM_) /* LCD Memory (for C) */ |
| #endif |
| SFR_8BIT(LCDM1); /* LCD Memory 1 */ |
| SFR_8BIT(LCDM2); /* LCD Memory 2 */ |
| SFR_8BIT(LCDM3); /* LCD Memory 3 */ |
| SFR_8BIT(LCDM4); /* LCD Memory 4 */ |
| SFR_8BIT(LCDM5); /* LCD Memory 5 */ |
| SFR_8BIT(LCDM6); /* LCD Memory 6 */ |
| SFR_8BIT(LCDM7); /* LCD Memory 7 */ |
| SFR_8BIT(LCDM8); /* LCD Memory 8 */ |
| SFR_8BIT(LCDM9); /* LCD Memory 9 */ |
| SFR_8BIT(LCDM10); /* LCD Memory 10 */ |
| SFR_8BIT(LCDM11); /* LCD Memory 11 */ |
| SFR_8BIT(LCDM12); /* LCD Memory 12 */ |
| SFR_8BIT(LCDM13); /* LCD Memory 13 */ |
| SFR_8BIT(LCDM14); /* LCD Memory 14 */ |
| SFR_8BIT(LCDM15); /* LCD Memory 15 */ |
| SFR_8BIT(LCDM16); /* LCD Memory 16 */ |
| SFR_8BIT(LCDM17); /* LCD Memory 17 */ |
| SFR_8BIT(LCDM18); /* LCD Memory 18 */ |
| SFR_8BIT(LCDM19); /* LCD Memory 19 */ |
| SFR_8BIT(LCDM20); /* LCD Memory 20 */ |
| |
| #define LCDMA (LCDM10) /* LCD Memory A */ |
| #define LCDMB (LCDM11) /* LCD Memory B */ |
| #define LCDMC (LCDM12) /* LCD Memory C */ |
| #define LCDMD (LCDM13) /* LCD Memory D */ |
| #define LCDME (LCDM14) /* LCD Memory E */ |
| #define LCDMF (LCDM15) /* LCD Memory F */ |
| |
| /************************************************************ |
| * Timer0_A3 |
| ************************************************************/ |
| #define __MSP430_HAS_TA3__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(TA0IV); /* Timer0_A3 Interrupt Vector Word */ |
| SFR_16BIT(TA0CTL); /* Timer0_A3 Control */ |
| SFR_16BIT(TA0CCTL0); /* Timer0_A3 Capture/Compare Control 0 */ |
| SFR_16BIT(TA0CCTL1); /* Timer0_A3 Capture/Compare Control 1 */ |
| SFR_16BIT(TA0CCTL2); /* Timer0_A3 Capture/Compare Control 2 */ |
| SFR_16BIT(TA0R); /* Timer0_A3 */ |
| SFR_16BIT(TA0CCR0); /* Timer0_A3 Capture/Compare 0 */ |
| SFR_16BIT(TA0CCR1); /* Timer0_A3 Capture/Compare 1 */ |
| SFR_16BIT(TA0CCR2); /* Timer0_A3 Capture/Compare 2 */ |
| |
| /* Alternate register names */ |
| #define TAIV TA0IV /* Timer A Interrupt Vector Word */ |
| #define TACTL TA0CTL /* Timer A Control */ |
| #define TACCTL0 TA0CCTL0 /* Timer A Capture/Compare Control 0 */ |
| #define TACCTL1 TA0CCTL1 /* Timer A Capture/Compare Control 1 */ |
| #define TACCTL2 TA0CCTL2 /* Timer A Capture/Compare Control 2 */ |
| #define TAR TA0R /* Timer A */ |
| #define TACCR0 TA0CCR0 /* Timer A Capture/Compare 0 */ |
| #define TACCR1 TA0CCR1 /* Timer A Capture/Compare 1 */ |
| #define TACCR2 TA0CCR2 /* Timer A Capture/Compare 2 */ |
| #define TAIV_ TA0IV_ /* Timer A Interrupt Vector Word */ |
| #define TACTL_ TA0CTL_ /* Timer A Control */ |
| #define TACCTL0_ TA0CCTL0_ /* Timer A Capture/Compare Control 0 */ |
| #define TACCTL1_ TA0CCTL1_ /* Timer A Capture/Compare Control 1 */ |
| #define TACCTL2_ TA0CCTL2_ /* Timer A Capture/Compare Control 2 */ |
| #define TAR_ TA0R_ /* Timer A */ |
| #define TACCR0_ TA0CCR0_ /* Timer A Capture/Compare 0 */ |
| #define TACCR1_ TA0CCR1_ /* Timer A Capture/Compare 1 */ |
| #define TACCR2_ TA0CCR2_ /* Timer A Capture/Compare 2 */ |
| |
| /* Alternate register names 2 */ |
| #define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */ |
| #define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */ |
| #define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */ |
| #define CCR0 TACCR0 /* Timer A Capture/Compare 0 */ |
| #define CCR1 TACCR1 /* Timer A Capture/Compare 1 */ |
| #define CCR2 TACCR2 /* Timer A Capture/Compare 2 */ |
| #define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */ |
| #define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */ |
| #define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */ |
| #define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */ |
| #define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */ |
| #define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */ |
| |
| #define TASSEL1 (0x0200) /* Timer A clock source select 0 */ |
| #define TASSEL0 (0x0100) /* Timer A clock source select 1 */ |
| #define ID1 (0x0080) /* Timer A clock input divider 1 */ |
| #define ID0 (0x0040) /* Timer A clock input divider 0 */ |
| #define MC1 (0x0020) /* Timer A mode control 1 */ |
| #define MC0 (0x0010) /* Timer A mode control 0 */ |
| #define TACLR (0x0004) /* Timer A counter clear */ |
| #define TAIE (0x0002) /* Timer A counter interrupt enable */ |
| #define TAIFG (0x0001) /* Timer A counter interrupt flag */ |
| |
| #define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */ |
| #define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */ |
| #define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */ |
| #define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */ |
| #define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */ |
| #define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */ |
| #define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */ |
| #define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */ |
| #define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */ |
| #define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */ |
| #define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */ |
| #define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */ |
| |
| #define CM1 (0x8000) /* Capture mode 1 */ |
| #define CM0 (0x4000) /* Capture mode 0 */ |
| #define CCIS1 (0x2000) /* Capture input select 1 */ |
| #define CCIS0 (0x1000) /* Capture input select 0 */ |
| #define SCS (0x0800) /* Capture sychronize */ |
| #define SCCI (0x0400) /* Latched capture signal (read) */ |
| #define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */ |
| #define OUTMOD2 (0x0080) /* Output mode 2 */ |
| #define OUTMOD1 (0x0040) /* Output mode 1 */ |
| #define OUTMOD0 (0x0020) /* Output mode 0 */ |
| #define CCIE (0x0010) /* Capture/compare interrupt enable */ |
| #define CCI (0x0008) /* Capture input signal (read) */ |
| #define OUT (0x0004) /* PWM Output signal if output mode 0 */ |
| #define COV (0x0002) /* Capture/compare overflow flag */ |
| #define CCIFG (0x0001) /* Capture/compare interrupt flag */ |
| |
| #define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */ |
| #define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */ |
| #define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */ |
| #define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */ |
| #define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */ |
| #define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */ |
| #define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */ |
| #define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */ |
| #define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */ |
| #define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */ |
| #define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */ |
| #define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */ |
| #define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */ |
| #define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */ |
| #define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */ |
| #define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges */ |
| |
| /* T0_A3IV Definitions */ |
| #define TA0IV_NONE (0x0000) /* No Interrupt pending */ |
| #define TA0IV_TACCR1 (0x0002) /* TA0CCR1_CCIFG */ |
| #define TA0IV_TACCR2 (0x0004) /* TA0CCR2_CCIFG */ |
| #define TA0IV_6 (0x0006) /* Reserved */ |
| #define TA0IV_8 (0x0008) /* Reserved */ |
| #define TA0IV_TAIFG (0x000A) /* TA0IFG */ |
| |
| /************************************************************ |
| * Timer1_A5 |
| ************************************************************/ |
| #define __MSP430_HAS_T1A5__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(TA1IV); /* Timer1_A5 Interrupt Vector Word */ |
| SFR_16BIT(TA1CTL); /* Timer1_A5 Control */ |
| SFR_16BIT(TA1CCTL0); /* Timer1_A5 Capture/Compare Control 0 */ |
| SFR_16BIT(TA1CCTL1); /* Timer1_A5 Capture/Compare Control 1 */ |
| SFR_16BIT(TA1CCTL2); /* Timer1_A5 Capture/Compare Control 2 */ |
| SFR_16BIT(TA1CCTL3); /* Timer1_A5 Capture/Compare Control 3 */ |
| SFR_16BIT(TA1CCTL4); /* Timer1_A5 Capture/Compare Control 4 */ |
| SFR_16BIT(TA1R); /* Timer1_A5 */ |
| SFR_16BIT(TA1CCR0); /* Timer1_A5 Capture/Compare 0 */ |
| SFR_16BIT(TA1CCR1); /* Timer1_A5 Capture/Compare 1 */ |
| SFR_16BIT(TA1CCR2); /* Timer1_A5 Capture/Compare 2 */ |
| SFR_16BIT(TA1CCR3); /* Timer1_A5 Capture/Compare 3 */ |
| SFR_16BIT(TA1CCR4); /* Timer1_A5 Capture/Compare 4 */ |
| |
| /* Bits are already defined within the Timer0_Ax */ |
| |
| /* T1_A5IV Definitions */ |
| #define TA1IV_NONE (0x0000) /* No Interrupt pending */ |
| #define TA1IV_TACCR1 (0x0002) /* TA1CCR1_CCIFG */ |
| #define TA1IV_TACCR2 (0x0004) /* TA1CCR2_CCIFG */ |
| #define TA1IV_TACCR3 (0x0006) /* TA1CCR3_CCIFG */ |
| #define TA1IV_TACCR4 (0x0008) /* TA1CCR4_CCIFG */ |
| #define TA1IV_TAIFG (0x000A) /* TA1IFG */ |
| |
| /************************************************************* |
| * Flash Memory |
| *************************************************************/ |
| #define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */ |
| |
| SFR_16BIT(FCTL1); /* FLASH Control 1 */ |
| SFR_16BIT(FCTL2); /* FLASH Control 2 */ |
| SFR_16BIT(FCTL3); /* FLASH Control 3 */ |
| |
| #define FRKEY (0x9600) /* Flash key returned by read */ |
| #define FWKEY (0xA500) /* Flash key for write */ |
| #define FXKEY (0x3300) /* for use with XOR instruction */ |
| |
| #define ERASE (0x0002) /* Enable bit for Flash segment erase */ |
| #define MERAS (0x0004) /* Enable bit for Flash mass erase */ |
| #define WRT (0x0040) /* Enable bit for Flash write */ |
| #define BLKWRT (0x0080) /* Enable bit for Flash segment write */ |
| #define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */ |
| |
| #define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */ |
| #define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */ |
| #ifndef FN2 |
| #define FN2 (0x0004) |
| #endif |
| #ifndef FN3 |
| #define FN3 (0x0008) |
| #endif |
| #ifndef FN4 |
| #define FN4 (0x0010) |
| #endif |
| #define FN5 (0x0020) |
| #define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */ |
| #define FSSEL1 (0x0080) /* Flash clock select 1 */ |
| |
| #define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */ |
| #define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */ |
| #define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */ |
| #define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */ |
| |
| #define BUSY (0x0001) /* Flash busy: 1 */ |
| #define KEYV (0x0002) /* Flash Key violation flag */ |
| #define ACCVIFG (0x0004) /* Flash Access violation flag */ |
| #define WAIT (0x0008) /* Wait flag for segment write */ |
| #define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */ |
| #define EMEX (0x0020) /* Flash Emergency Exit */ |
| |
| /************************************************************ |
| * Comparator A |
| ************************************************************/ |
| #define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */ |
| |
| SFR_8BIT(CACTL1); /* Comparator A Control 1 */ |
| SFR_8BIT(CACTL2); /* Comparator A Control 2 */ |
| SFR_8BIT(CAPD); /* Comparator A Port Disable */ |
| |
| #define CAIFG (0x01) /* Comp. A Interrupt Flag */ |
| #define CAIE (0x02) /* Comp. A Interrupt Enable */ |
| #define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */ |
| #define CAON (0x08) /* Comp. A enable */ |
| #define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */ |
| #define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */ |
| #define CARSEL (0x40) /* Comp. A Internal Reference Enable */ |
| #define CAEX (0x80) /* Comp. A Exchange Inputs */ |
| |
| #define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */ |
| #define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */ |
| #define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */ |
| #define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/ |
| |
| #define CAOUT (0x01) /* Comp. A Output */ |
| #define CAF (0x02) /* Comp. A Enable Output Filter */ |
| #define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */ |
| #define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */ |
| #define CACTL24 (0x10) |
| #define CACTL25 (0x20) |
| #define CACTL26 (0x40) |
| #define CACTL27 (0x80) |
| |
| #define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */ |
| #define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */ |
| #define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */ |
| #define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */ |
| #define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */ |
| #define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */ |
| #define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */ |
| #define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */ |
| |
| /************************************************************ |
| * Interrupt Vectors (offset from 0xFFE0) |
| ************************************************************/ |
| |
| #define VECTOR_NAME(name) name##_ptr |
| #define EMIT_PRAGMA(x) _Pragma(#x) |
| #define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name |
| #define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section)) |
| #define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \ |
| PLACE_VECTOR(VECTOR_NAME(func), offset) |
| |
| #define BASICTIMER_VECTOR (0 * 1u) /* 0xFFE0 Basic Timer */ |
| /*#define BASICTIMER_ISR(func) ISR_VECTOR(func, ".int00") */ /* 0xFFE0 Basic Timer */ /* CCE V2 Style */ |
| #define PORT2_VECTOR (1 * 1u) /* 0xFFE2 Port 2 */ |
| /*#define PORT2_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Port 2 */ /* CCE V2 Style */ |
| #define PORT1_VECTOR (4 * 1u) /* 0xFFE8 Port 1 */ |
| /*#define PORT1_ISR(func) ISR_VECTOR(func, ".int04") */ /* 0xFFE8 Port 1 */ /* CCE V2 Style */ |
| #define TIMER0_A1_VECTOR (5 * 1u) /* 0xFFEA Timer0_A CC1-2, TA0 */ |
| /*#define TIMER0_A1_ISR(func) ISR_VECTOR(func, ".int05") */ /* 0xFFEA Timer0_A CC1-2, TA0 */ /* CCE V2 Style */ |
| #define TIMER0_A0_VECTOR (6 * 1u) /* 0xFFEC Timer0_A CC0 */ |
| /*#define TIMER0_A0_ISR(func) ISR_VECTOR(func, ".int06") */ /* 0xFFEC Timer0_A CC0 */ /* CCE V2 Style */ |
| #define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer */ |
| /*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */ |
| #define COMPARATORA_VECTOR (11 * 1u) /* 0xFFF6 Comparator A */ |
| /*#define COMPARATORA_ISR(func) ISR_VECTOR(func, ".int11") */ /* 0xFFF6 Comparator A */ /* CCE V2 Style */ |
| #define TIMER1_A1_VECTOR (12 * 1u) /* 0xFFF8 Timer1_A CC1-4, TA1 */ |
| /*#define TIMER1_A1_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Timer1_A CC1-4, TA1 */ /* CCE V2 Style */ |
| #define TIMER1_A0_VECTOR (13 * 1u) /* 0xFFFA Timer1_A CC0 */ |
| /*#define TIMER1_A0_ISR(func) ISR_VECTOR(func, ".int13") */ /* 0xFFFA Timer1_A CC0 */ /* CCE V2 Style */ |
| #define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable */ |
| /*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */ |
| #define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] */ |
| /*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */ |
| |
| /* Alternate Names */ |
| |
| /************************************************************ |
| * End of Modules |
| ************************************************************/ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* extern "C" */ |
| |
| #endif /* #ifndef __msp430x41x */ |
| |
